Used Schuler Pe4S 50/800 for sale (40,388)

Condition: used, Electric forklift Still RX 60-50 DGUV inspection valid until October 2026 Battery from February 2021 with Still charger Year of manufacture 2008 Approximately 2690 operating hours Unladen weight (without battery) 5170 kg Battery max. 2287 kg Good condition Battery from February 2021 with Still charger Battery 80V 930 AH Overall height approximately 2480 mm Lifting height approximately 3500 mm Fork length approximately 2000 mm Pgsdpe Agm Rrjfx Angeu Equipped with Kaup fork positioner and side shifter Loading onto a standard truck without a ramp using a forklift is no problem This offer is exclusively for commercial businesses as defined in §14 of the German Civil Code (BGB). No sales to private individuals!

Condition: used, Year of construction: 2007, max. wheel diameter 1.100 mm max. dia. of teeth cutting 800 mm max. module 12 mm rotary table speeds infinitely variable 12 U/min stroke position adjustment 0 - 600 mm number of strokes (double strokes) 50 - 600 DH/min working spindle speeds 25 U/min workpiece diameter max. 275 mm stroke lenght adjustment 0 - 240 mm total power requirement 64 kW Pjdpfx As Afarlongjgu weight of the machine ca. 21 t dimensions of the machine ca. 7,30 x 5,00 x 3,65 m

Condition: excellent (used), Year of construction: 2007, KRAUSSMAFFEI KM 800-12000 MX Injection Molding Machine - Year of manufacture: 2007 - Machine serial number: 61009705 - Clamping force: 8,000 kN (800 tons) - Machine type: hydraulic, two-platen injection molding machine - Control system: KraussMaffei MC5 2. Clamping System - Clamping system: hydraulic-mechanical, two-platen - Design: 4 pressure pads and 4 locking units on the moving platen - Clamping force: 8,000 kN (800 tons) - Dimensions of mounting platens (H × V): 1,600 × 1,530 mm - Column spacing (H × V): 1,120 × 1,000 mm - Minimum mold height: 500 mm - Maximum mold height: 1,100 mm - Maximum opening stroke: 2,600 mm 3. Plasticizing System - Complete plasticizing system for thermoplastics - Injection unit: 12000 - Screw diameter: 135 mm - Check valve: yes - Nozzle: open - Injection unit adjustment: PV 4. Injection Unit - Screw diameter: 135 mm - Injection volume: 8,588 cm³ - Injection shot weight: 7,815 g - Maximum injection pressure: 1,389 bar 5. Hydraulic and Electrical System - Rated power of pump motor: 132 kW - Heater power: 90 kW - Operating voltage: 380 V - Power supply: three-phase - Frequency: 50 Hz - Rated current of circuit 1: 255 A - Rated current of circuit 2: 318 A - Main fuse for circuit 1: 315 A - Main fuse for circuit 2: 400 A 6. Control System - KraussMaffei MC5 control system - Color operator monitor - Integrated control panel - USB data carrier support Pedpfj Af Ib Usx Angegu - Adjustment of injection process parameters 7. Machine Dimensions and Weight - Length: 11,720 mm - Width: 2,920 mm - Height: 2,650 mm - Net weight including control cabinet: approximately 50,000 kg (50 tons)

Condition: used, New: Yes Pjdpfxj Af Uh Ns Angjgu Year of construction: 2025 Working width: 260 cm

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Pjdpfszwlbfsx Angegu Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Injection volume: 392 cm3 Shot weight: 359 g Injection pressure: 2000 bar Working hours: 10.444 Core pullers: 1x

Condition: good (used), Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Pgedpe Agaxpsfx Angou Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Pgedpfsy Urpyox Angsu Fiber laser 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, Deckel Maho DMU 50 T – CNC universal milling machine (year of manufacture 1996) For sale is a CNC universal milling machine, Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, as well as for training workshops. Key features: Control system: MillPlus (Deckel Maho) Travel distances: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling round table for flexible 5-axis machining Equipment: Full enclosure with sliding doors and ergonomic control panel The machine has a fault in the X-axis. When moving, it triggers the emergency stop. Since the machine has not been used since 2018, repairing it is not worthwhile for us. Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: The dismantling, removal from the building, loading, and transport must be fully organized and carried out by the buyer (at their own cost and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on site by appointment. Podpfxoz D Ab Tj Angogu

Condition: good (used), machine/vehicle number: 3513, Year of construction: 2009, load capacity: 32,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 6,900 mm, total width: 3,700 mm, operation weight: 46,000 kg, additional equipment features: Centralized greasing system, Engine heater, SveTruck 32120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Pgodpfxeyuil Ro Angsu Wheel size – Steering wheel: 16.00x25

Condition: used, Year of construction: 2017, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: CMX 50 U Year of manufacture: 2017 Control system: DMG MORI SLIMline Technical details: Control system: DMG MORI SLIMline X-travel: 500 mm Y-travel: 450 mm Z-travel: 400 mm B-axis: -5 / +110° C-axis: 360° Table dimensions: 630 x 500 mm Rapid traverse: 30 m/min Spindle speed range: 20 – 12,000 rpm Drive power (40/100%): 13/9 kW Tool holder: SK 40 Pgjde Agpdnspfx Angju Number of tool stations: 30 positions Operating hours: approx. 11,605 h Spindle hours: approx. 4,061 h Technical features & accessories: - Chip conveyor - Internal Coolant Supply (ICS) - Coolant spray gun - Electronic handwheel - Direct measuring system (X, Y, Z axes) - Renishaw probe kit - Oil and emulsion mist separator Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2005, condition: used, Roller conveyor, roller conveyor, powered roller conveyor, roller conveyor -Handover: in current condition as seen -Motor: without brake, pneumatic adjustment. out of function / guide rails dismantled -Roller conveyo: type 3.50.4.5 KS -Speed: 6.8 m/min -Conveyor belt rollers Ø56 x 830 mm -Conveyor belt length: 1800 mm -Load capacity: 150 kg -Drive: SEW Eurodrive 0.25 kW -Individual components: see photos -Total dimensions: 1800/1100/H220 mm Pgedpfx Anopm Th Njgsu -Weight: 163 kg

Condition: ready for operation (used), ipf PT700523 / 50115802 Laser Sensor SN: 13070501 68 009, used, good condition, 100% functional, scope of delivery as per photos Psdpep Illwjfx Angegu

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet drawer cabinet sturdy design -2 drawers: layout/height see photos -Cabinet door: lockable Pgsdpfx Astvht Eengou -Number: 1x cabinet available -Dimensions: W x D x H 500/600/H 800 mm -Weight: 35 kg

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Pgjdsk Aa Rrjpfx Angeu Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1984, Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Pgsdpjuqdizsfx Angju Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton Standard configuration Cushion in table pneumatic Extended machine accessories die loading charts for tool changeABB Handling robots for loading and unloading presses

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering, suspended -Platform: 1800/950/H590 mm -Load capacity: 3 t -Tires: 305/415x90 -Drawbar: reversible, trailer coupling on both sides -Total dimensions: 2820/950/H590 mm -Weight: 362 kg Pgjdpfx Anjub D Rfogsu

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc Pgjdpfeuayy Hox Angeu T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: excellent (used), Safety valve for refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, temperature switch, thermostat, expansion valve, safety valve -Manufacturer: Hansa, safety valve, unused, original packaging -Type: KSV 28 bar 2442280050 -Connection: G1/2" -Number: 5 safety valves available -Price: per piece -Package dimensions: 150/80/H55 mm Podpfx Anofyfxbogegu -Weight: 0.6 kg/piece

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded 800 x 500 x 180mm Pjded Evl Dspfx Angogu completely welded housing Ring eyelets for suspension

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 800x500 mm Layout Workbench The CORMAK 800x500 mm layout workbench is a solid and functional solution designed for professionals involved in precision tapping operations. It is perfectly compatible with electric tapping machines and tapping arms, ensuring stability and comfortable operation in every industrial workshop. Its construction has been designed for intensive use, offering excellent quality, ergonomics, and user convenience. Thanks to innovative design solutions, the workbench enables efficient tapping processes while ensuring high precision and reliability for many years of operation. Main advantages of the CORMAK 800x500 mm layout workbench High precision: The workbench is equipped with T-slots spaced 152 mm apart, allowing accurate tool positioning and providing ideal conditions for precise tapping operations. Solid construction: Made of durable materials, the workbench ensures stability and long-term reliability during intensive use, which is essential when working with electric tapping machines and tapping units. Ergonomics and working comfort: The table provides an optimal working height of 760 mm and a spacious tabletop measuring 800 × 500 mm, ensuring comfortable operation and reducing operator fatigue during long tapping processes. Mobility: Equipped with lockable wheels, the workbench can be easily moved around the workshop, allowing flexible adjustment of the working area according to current needs. Functionality: The integrated tool cabinet provides quick access to necessary accessories, improving workflow efficiency and speeding up tapping operations. Design and technology of the CORMAK 800x500 mm layout workbench The CORMAK 800x500 mm layout workbench has been designed with durability and precision in mind. The tabletop, manufactured from materials resistant to intensive use, provides excellent rigidity and stability during operation with tapping machines and electric tapping units. T-slots with dimensions of 3 × 14 mm and a spacing of 152 mm allow secure and precise tool positioning, resulting in high-quality threaded holes. The workbench construction ensures full functionality, enabling convenient handling of workpieces of various sizes. The workbench is equipped with a practical tool cabinet that allows quick storage of accessories, improving workplace organization. Built-in lockable wheels provide mobility, allowing easy movement around the workshop while maintaining stability during tapping operations. Standard equipment of the CORMAK 800x500 mm workbench Pgedpfjvugu Eox Angou Tool cabinet: Provides convenient storage of accessories, improving organization and working comfort. Lockable wheels: Allow easy movement around the workshop while ensuring mobility and flexibility. Worktop: Dimensions of 800 × 500 mm and thickness of 50 mm provide excellent rigidity and sufficient workspace for various materials. T-slots: Enable precise positioning and guidance of layout and machining tools. Technical specifications of the CORMAK 800x500 mm layout workbench Parameter Value Tabletop dimensions 800 × 500 mm Table height 760 mm Tabletop thickness 50 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Pedpfx Aou Hrf Dengegu Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: used, 50 m3 / 50,000 l horizontal steel tank Pgsdpfx Aextmzxjngou Diameter: 2.50 m Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: used, Transnorm Rising falling Incline belt conveyor with leading belt GF 5800+1000-600-600 RA2454 Technical data: Conveyor length (NL): 6800 mm ( 5800 mm riser segment + 1000 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Pedpex Ixt Eofx Angsgu Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), feed length X-axis: 800 mm, planing width: 800 mm, Double-sided planer. In very good working condition. Pgsdpox Rrykofx Angeu

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Pedpfxeu Tkclo Angogu Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!