Used Schechtl Max 200 & Msb 200 for sale (36,511)

Condition: used, Faceplate chuck Manufacturer: WMW Clamping range: 30 - 200 mm Maximum clamping force: 3500 kN Kedpfx Aocu Ngkonusnc Short taper size: 5

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40 Knjdpfxjhtaaqo Anujc

Condition: new, clamping range of chuck 10 - 200 mm height 67,5 mm daylight 65 mm external diameter Futter 200 mm external diameter Spannhebel 360 mm weight 4 kg Ksdsfv Awljpfx Anujnc Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Year of construction: 2015, condition: excellent (used), Three-jaw chuck Manufacturer: Röhm Diameter: 200 mm With individually adjustable jaws Knjdped Th I Tsfx Anuoc Short taper size: 6 Taper diameter: 106.390 Bolt circle diameter: 133.4 Weight: 24.5 kg Year of manufacture: estimated

Condition: good (used), Engine freshly overhauled (over 12tys zl). 100% operational I invite you to contact me Knjdpfxett T Nfe Anusc

Condition: new, maximum load weight: 39,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list Complete equipment list available upon request. Equipment: * Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick. Loading platform: * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, located horizontally at the front of the loading platform, for (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond-plate flooring over the axles. Kingpin: * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle with trailing arm steering * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually Air suspension: * with lifting and lowering valve Tires: * 235/75 R 17.5 3PMSF – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Steel construction: * made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: * according to EU regulations * Lighting: 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel construction automatically blasted with a shot blasting machine after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint build tested in a salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front bulkhead, approximately 400 mm high Kodpfxsz Rr R Se Anujnc * A spare wheel holder in front of the bulkhead * Mounting rail for aluminum loading ramps on the gooseneck with integrated impact protection (± 56 kg) * Galvanized folding supports under the bevel of the loading platform * A mounting bracket for a rotating beacon on the rear of the trailer * On the gooseneck and rear panel, on the left and right, a mounting bracket for warning signs including socket * Load indicator to determine the axle loads including load diagram * 1 pair of recessed lashing rings along the center beam at the rear in the bevel (LC 10,000 daN) * Additional fastening option for the license plate of the trailer at the rear right of the trailer Incl. special accessories: * Aluminum sideboards and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvan

Condition: used, mileage: 257,050 km, power: 120 kW (163.15 HP), first registration: 07/2021, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,850 mm, total height: 3,250 mm, loading space length: 4,200 mm, loading space width: 2,050 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal vehicle number: 7355B ----Why autonext? Knodpfxjxdm Dzj Anujc Over 400 immediately available cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options possible. Complete vehicle range available on autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Good, well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Body: Maxi refrigerated box ThermoKing V500 MAX refrigeration unit Refrigerant R-404A/ R-452A Standby cooling + engine cooling Optionally, we offer a refrigeration service from the manufacturer for only 899 Euros. Hydraulic tailgate (750 kg) Payload 2,030 kg Permissible total weight 5,500 kg Loading area: Length 4.20m / Height 2.20m / Width 2.05m Rear view camera Navigation system Controlled air conditioning (Tempmatik) ---- Special equipment: * Multimedia system MBUX (touchscreen 7") * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the dashboard, passenger side * 2nd battery (auxiliary battery) interior * Acoustic package * Exhaust pipe in front of the rear axle, left * Extended exterior mirror base, left/right * Battery disconnect switch 1-pole * DAB tuner (digital radio reception) * Vehicle without start/stop system * Generator 250 A * Speed limiter 90 km/h * Connection strip for electrical connections (driver's seat box) * Controlled air conditioning (Tempmatik) * Fuel filter with water separator * Front engine drive with bracket for additional coolant compressor * Navigation system for MBUX multimedia system * Seats in the cab: Double passenger seat * Separating relay for additional battery * Reinforced front axle Standard equipment: Storage compartment above the windshield, Adaptive brake light, Airbag driver side, Anti-lock braking system (ABS), Anti-slip control (ASR), Drive type: Rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Outside temperature indicator, Roof lining in the cab, Automatic switch-on for driving lights, Electronic brake force distribution (EBV), Electronic stability program (ESP), Driving assistance system: active brake assist, Driving assistance system: crosswind assist, Driving assistance system: lane keeping assist, Digital tachograph, Suspension: stabilization level II, Electric windows 2-way, 6-speed gearbox - TSG (Eco Gear), Body/structure: standard platform, Keyless start, Communication module (LTE) for digital services, Fuel tank: main tank 71 L, Steering wheel (steering column mechanically adjustable), Headlight range adjustment, Truck approval, Side marker lights, Mercedes-Benz emergency call system, Engine 2.1 L - 120 kW CDI CAT, Particulate filter, Wheelbase 4325 mm, Low emissions according to Euro 6 emission standard, Safety belt system with warning system (driver side), Seat cover / upholstery: fabric, Seats in the cab: Driver's seat with armrest, Seats in the cab: Driver's seat adjustable, Daytime running lights, Underrun protection at the rear, Fleece battery 92 Ah, Maintenance interval display Assyst, Immobilizer, Heat-insulating glazing (windshield with band filter at the top), Central locking with remote control, Permissible total weight 5.00 t. ----Inspection (MOT) / emissions test can be done upon request. ----Warranty & "TÜV Profi Check" are of course avail

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Knjdpfx Aozqt Umonusc Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Ksdpfx Aji Ri N Ujnuonc Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Ksdpfsxfluujx Anusnc Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Knjdpfoy Tvtmox Anuoc Available for viewing at our facilities in Semsales, Switzerland.

Condition: used, mileage: 4,710 km, power: 55 kW (74.78 HP), first registration: 07/2025, fuel type: diesel, color: white, next inspection (TÜV): 07/2026, driver cabin: other, gearing type: other, Year of construction: 2025, operating hours: 165 h, total length: 5,090 mm, total width: 1,420 mm, total height: 2,340 mm, maximum speed: 50 km/h, * 224901 Swingo 200+ 2 Brush System * 225101 Euromot 5 Engine 55 kW (75 hp) * 225201 500-hour Long Life Oil * 225404 50 km/h * 225300 Hydro-pneumatic Suspension * 231701 Noise Reduction for Cabin & Container * 187001 Steering Wheel Knob * 226502 Radio DAB+ * 226601 Rear View Camera * 226701 Suction Nozzle Camera * 226801 Reverse Warning System, Switchable * 226901 12 Volt Socket * 235001 Standard Monitor * 226301 3-Point Safety Belt for Driver * 226401 2-Point Belt (Lap Belt) for Passenger * 230501 Rotating Beacon, Foldable * 228503 Sweeper Brush, Mixed (Poly/Steel) * 228801 Rollers for Suction Nozzle instead of Skids * 227301 Independent Brush Control * 227401 C-Shaped Brush Arms * 228701 17 mm Rubber Suction Nozzle * 228901 Stainless Steel Container Pipe * 229201 Hand Suction Hose Preparation * 190701 Standard Paint, RAL 9016 White * 1317SWINGO Operating Manual * 232601 Wheel Chock with Holder * 100901SWIN Modem Kit IntelliOPS Knsdpfxez Sc T Uo Anuec Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the current condition. * All information without guarantee.

Condition: new, Year of construction: 2020, power: 85 kW (115.57 HP), gearing type: other, driver cabin: other, Vehicle location: Bovenden Kjdoz Hd T Nspfx Anusnc Maximum output in kW: 85 RPM: 1000 Maximum pressure: 150 bar New, from stock, manufactured in 2020! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Kedezyihuspfx Anusnc Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * with angled front corners approximately 45° and rear slope approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick, extendable loading platform Loading platform * extendable design with rear slope approximately 1,000 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, diamond plate flooring over the axles Kingpin supports * JOST kingpin supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Tires * 235/75 R 17.5 3PMSF * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. * For correct display, the tractor unit must be able to transmit and display this data. Kodez N Nwyopfx Anuonc Axles * BPW axles and suspension, 2 fixed axles, 1 steerable axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with lifting and lowering valve Braking system * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting * Complete steel construction automatically blasted with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * Final painting with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red * in accordance with the RAL system 841GL * Rims in silver gray * Rear section metallic and in RAL 9010 (pure white) * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Included accessories * Axle tool * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * Mounting in the rear area of the gooseneck for aluminum loading ramps * Galvanized folding supports under the slope of the loading platform * One mounting for warning signs on the gooseneck and on the rear panel, left and right * including socket loadometer for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized locking strips are removable. (Length of the superstructure approx. 2,560 mm) * A toolbox galvanized, integrated in the angled gooseneck * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' cont

Condition: used, Year of construction: 1985, cutting diameter 200 mm band length . mm stroke . mm total power requirement . kW weight of the machine ca. . t Ksdpsz Icx Hsfx Anuenc dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. Knedpfxjz Ixfvs Anusc The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. If you are interested, please contact me.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable Kodpfoz Iq Trox Anuonc - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Kedoz Irx Njpfx Anuenc Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards Knedpfx Anez Ir Hasusc - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, maximum load weight: 30,210 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2013, loading space length: 13,430 mm, loading space width: 2,470 mm, loading space height: 2,650 mm, loading space volume: 88 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2013, Equipment: ABS, 3-Axle Lamberet SR2B Reefer Trailer VIN: FC1R24111 Chassis / Components: * Jost landing gear * Air suspension / Raise and Lower * Lift axle * 3 x BPW Eco Plus axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front ~80%, Middle ~90/80%, Rear ~60% * Jost landing gear Knedpfez I Hc Asx Anuec * Pallet box * 1 x Fire extinguisher holder * Spare tire holder for 2 tires * Aluminum diesel tank Body: * Reefer refrigerated box * L x W x H: 13.43 m x 2.47 m x 2.65 m * Cargo space: approx. 88 m³ * Interior lighting * 2 x rails per side for cargo securing * Floor: Plastic * Refrigeration unit: Thermo King SLX 200 * Diesel hours: 17,362 hours * Mains operation: 935 hours * Mains operation // Electric * Temperature recorder Euro Scan * Printer Weights: * Gross vehicle weight: 39,000 kg * Tare weight: 8,790 kg * Payload: 30,210 kg Other: * German vehicle * TÜV (technical inspection) valid until 11/2026 ---- New main inspections / safety checks or weight adjustments are possible upon request. We will gladly assist you in obtaining export / transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors. Subject to change! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large variety of vehicles can be found on our 11,000 m² site. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day permits / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, 1 unit double grinding stand AEG DWS 200/800M with wall mount, self-disassembly Color: as shown in the pictures, according to the images and inspection Knsdpfx Anjz I Nrgjusc Condition: used Location of the goods: workshop Payment method: prepayment by bank transfer Shipping: self-collection only from the Bischofswiesen location

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Knedpjz H Udlsfx Anusc Type PR10 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Year of construction: 2021, condition: used, For inquiries regarding the equipment, please contact Mr. Herden (tel. number). Optimas vacuum lifter SV 200 E incl. suction plate & other accessories / year of manufacture: 2021 / in stock & immediately available / in excellent condition Price: €2,190.00 net / €2,606.10 gross - Weight: 21 kg - Load capacity: 200 kg - Vacuum pump: 16 m³ Features: - incl. suction plate & other accessories (see photos) In our warehouse, we have a very large selection of various equipment that is immediately available! Mr. Herden (tel. number) will be happy to assist you. Knedpjz Ht Hlefx Anuec Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 003674 = Further information = Unladen weight: 21 kg Please contact Marius Herden for further information.

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Knodpfx Anjz H Ixcsujc Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T