Used Renner Sldk-I 3.7 for sale (53,664)

Year of construction: 1998, condition: good (used), Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm Ljdpfxolyvcqs Albeah -Own weight: 59 kg

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Ledpfom Udfwox Albeah Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure. Laedpfx Aleb Nzycsboh

Condition: used, Electric motor, three-phase motor -Power: 3.7 kW -Speed: 950 rpm -Shaft: Ø 28 mm Ljdpfx Aljcwtpasbjah -Construction: B3 -Protection class: - -Dimensions: 420/350/H290 mm -Weight: 72 kg

Condition: used, Electric motor, three-phase motor Lasded A Ex Ujpfx Albeh -Power: 3.7 kW -Speed: 1430 rpm -Shaft: Ø 32 x 50 mm -Construction: B3 -Dimensions: 400/295/H350 mm -Weight: 85 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 3.7 rpm -Power: 0.55 kW -Diameter shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 Lajdpfx Ascmtndolbeh -Dimensions: 760/220/H250 mm -Weight: 42 kg

Condition: good (used), Interface converter, converter module -Type: i-7520 Price: per piece Laodpsb A I Rnefx Albeh -Quantity: 2 available -Weight: 0.5 kg

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1054, grinding length: 400 mm, grinding width: 150 mm, Table length: 400mm Table width: 150mm Maximum cutting length: 400mm Maximum grinding width: 150mm Maximum workpiece weight: 75kg Distance spindle to table: 400mm Table speed 1-24 m./min. Lasder Eq U Sepfx Albsh Sharpening stone diameter: 25mm Spindle speed: 900 – 4500 rpm. Year of construction: 1979

Condition: ready for operation (used), Franz Kessler DMQ .4.AF I main spindle motor, serial number as shown in the photo, used, with significant signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Ljdpfx Aloi D H S Robjah

Condition: ready for operation (used), ABB Procontic CS 31 ICSE08A6 Analog I Remote Unit 24VDC, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Lasdpfx Aloi D Tr Isbsh

Condition: ready for operation (used), AEG / Schneider Modicon AS-B872-100, 800 I/O, analog output 4-20mA, 4 channels, serial no. 20032987, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfx Alji D Tt Tjbjah

Condition: used, centrifugal pump, water pump, stainless steel pump, food pump -Manufacturer: Hilge, stainless steel centrifugal pump -Type: Contra I/3 AD-V 25/25/1.5/2 -Motor: Siemens 1.50 kW / 2860 rpm -Inlet/outlet pipe connection DN25 Lsdpfjh Hbw Nox Albsah -Dimensions: 715/215/H265 mm -Weight: 37 kg

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Ledpfx Alei Hn Srjbsah Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, empty load weight: 5,580 kg, maximum load weight: 30,420 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/1988, loading space length: 12,700 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, total length: 12,800 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 9.5R17.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, pallet box, twin tires. Lsdsi Rnu Uepfx Albjah Superstructure: Ideal showman trailer, Zorzi axles, loading area over axles 9000mm, loading area over kingpin 3700mm, 3x Zorzi axles. Approximately 3,000 EUR has recently been invested in brakes and axles! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: ready for operation (used), The robot is used for dispensing pastes or liquids in a targeted or arbitrary manner. Laedshx Nh Rspfx Albeh

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer of transmission: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Motor manufacturer: Siemens, type 1 FT5072-OAFO1-2 / Brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm //3000 rpm -Hollow shaft: Ø 38 x 125 mm Laodpfx Asgypu Islboh -Shaft: Ø 16 x 40 mm -Dimensions: 540/275/H230 mm -Weight: 29 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting claw 6 IP Ledogtn Dfepfx Alboah -Clamping range: 0 - 40 mm -Load capacity: 6 t -Dimensions: 250/110 / H550 mm -Weight: 26 kg

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Lodogbug Nepfx Alboah In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: good (used), DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x22/I SN31 IGMi12/2 Lasdpetr R A Eefx Albjh -Voltage: 24 V -Torque: 108 N/cm -Speed: 340 rpm -technical data: see photo type plate -Shaft: Ø 10 x 28 mm -Number: 4x engines available -Price: per piece -Dimensions: 170/100/H100 mm -Weight: 2.0 kg/piece

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L Ljdpfxoub Utdj Albeah engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Ljdpfsudb I Tex Albsah

Condition: used, functionality: fully functional, machine/vehicle number: F21172J03881, Year of construction: 2018, operating hours: 3,067 h, load capacity: 1,200 kg, lifting height: 2,110 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Lajdpfx Aleuhw Ecsbsh Fahrgestellnummer: F21172J03881 Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Battery Volt: 24V Description: Linde L12 I R0080 Year of construction: 2018 Operating hours: 3067 The device is visually and technically in very good condition. Charger on request. In our stock there are two more devices with this model type and standard mast. The fork length is 1150mm for all of them, while the overall height is 1500mm or 1690mm and the lifting height is 2110mm or 2424mm. The operating hours range from 1338h to 3166h. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the machine! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. Any sale of used goods is subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Initial lift,

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Lsdpfx Aljz Ada Dobjah

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart Laedpfxjzx Un Ro Albsh The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: new, I am selling new valves, dampers, and condensate pots, everything shown in the picture, also available individually. Purchased from Textilka, Switzerland. High-quality products, total weight approximately 4.5 tons. Laedpozzfdzjfx Albsh