Used Quick-Tech Xts-42 for sale (12,912)

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece Pgjdpfx Ajrvlfnjngsu -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 40 mm -Dimensions: see photos Pgjdorvlf Djpfx Angeu -Quantity: 12x quick-change chucks available -Price per piece -Dimensions: Ø 72 x 215 mm -Weight: 2.1 kg/pc.

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 28 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 58 x 190 mm -Weight: 1.1 kg Podpfxerv Avro Angegu

Condition: used, Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece -Quantity: 3 pieces Pgodsr U Sf Ispfx Angeu -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece

Condition: good (used), Single-phase isolation transformer, isolation transformer, solid rubber distribution box -Manufacturer: Gifas, Isolation transformer, solid rubber distributor -Type: 500 Item No. 65T0500112P42ZF Psdoivumljpfx Angjgu -Primary: 220 V 50 Hz -Secondary: 42 V see photo of nameplate -Power: 500 VA -Dimensions: 320/230/H265 mm -Weight: 12 kg

Condition: used, Quick release device, quick release, quick release vice, drilling device, machine vise, drill vise, clamping sleeve, collet, clamping device -Manufacturer: VEB, clamping device type TGL30-10206 -Size: 100 x 60 mm -Clamping height: max. 70 mm Pgodpfxog D Rmxs Angeu -Dimensions: 180/160 / H135 mm -Weight: 7.2 kg

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, operation weight: 4,200 kg, Year of construction: 2021, operating hours: 1,290 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Operating weight: 4,200 kg, Kubota D1803-CR-T Turbo Stage V - Tier 4 Final diesel engine, 32.8 kW/46 hp, water-cooled, Pgedpfx Anett Dh Dogeu Swivel arm and monobloc boom, zero tail, LOAD SENSING hydraulic flow sharing control block and electronically controlled load sensing pump with ECO - Standard - Power working mode, automatic speed reduction, dozer blade, rubber tracks, foldable, cushioned cab ROPS/TOPS/FOPS level 1 with heating and radio preparation, Digging depth: 3,085 mm, Powertilt PT05 Additional equipment: Air conditioning, load holding valve on blade, rear camera, Plexiglas canopy, LEDs at the front, rear and on the boom, rotating beacon, Potentiometer on AUX1, electrical switching, Powertilt

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners, end clamps -Solar fastener: End clamp -Type: AK 18-6160/50 H-42 mm -Module frame height: up to 42 mm -Material: Aluminum -Number: 500 terminals available Price: per piece -Minimum order quantity: 50 units -Dimensions: 50/45/H27 mm Pjdpfot Snvuox Angsgu -Weight: 0.01 kg/pc.

Condition: excellent (used), Door closer, floor door closer, closing mechanism Pgodpfx Anotzrfrogeu -Manufacturer: GU BKS, floor door closer UTS 42, unused, original packaging -Item No.: 50031099 -Door width: 1100 mm -Quantity: 1x door closer available -Cardboard dimensions: 360/100/H95 mm -Weight: 3 kg

Condition: used, Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete Pjdpfxoqufths Angjgu -Transport dimensions: 800/700/H30 mm -Weight: 8.2 kg

Condition: used, Year of construction: 1984, Gear motor, electric motor -Manufacturer: Eberhard Bauer, gear motor type DO 42 F 04/141 -Speed: 250 rpm -Power: 110 W / 2700 rpm -Shaft: Ø 10 x 25 mm -Design: B5 -Protection class: IP55 -Number: 4x motor available -Price per piece -Dimensions: 250/110/H110mm -Weight: 3.6 kg/piece Pedst Drkaopfx Angogu

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Pedofu Nbbopfx Angsgu Visualization of the entire workflow with simple data entry

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This Pgsdsfg E Hmepfx Angsu ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one Pgedpfx Anefg E Hpjgju high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. Pgjdpfx Ansfgyifogeu The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm Pedpfx Aefgyigengegu capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece Pgedpsd N T U Djfx Angeu -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

Condition: good (used), - Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Vibrating bottles: 2 -Cable length: 6m each -Weight: 100 kg Pgsdjb A Hg Sopfx Angeu

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm Pgedpst Hwz Ajfx Angsu control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: Pgjdpfx Anoz Aaw Ssgju - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: good (used), functionality: fully functional, 3 inserts for Multifix, size C, Pgsdpfx Aez D Sxhjngou

Condition: used, Year of construction: 1999, Technical details: turning diameter: 200 mm turning length: 600 mm capacity X-axis: 190 mm capacity Z-axis: 555 mm double spindle units: spindle distance: 800 mm spindle drive: Links (40/100%ED): 18/14 kW spindle turning speed range: 31-6300 U/min spindle drive: Rechts (40/100%ED): 18/14 kW spindle turning speed range: 31-6300 U/min speeds of tool: 2x12 Werkzeuge: 7/5 KW, 40-4200 U/min dimensions of the machine ca.: 5,032 x 3,048 x 2,445 m weight of the machine ca.: 6500 Kg Pedpfx Aoz A Andjngjgu Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: used, Year of construction: 2006, bar feeder, second-hand manufacturer: IEMCA model: PRA 52/42/F year of construction: 2006 bundle-loading type magazine Pedpfx Aez A D D Tongjgu Please, contact us for getting more information and pictures on mail(at) or subject to sale and mistakes *

Condition: used, functionality: fully functional, turning diameter: 435 mm, spindle motor power: 11,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, type of input current: three-phase, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, quill stroke: 275 mm, quill diameter: 55 mm, overall weight: 3,600 kg, Equipment: rotational speed infinitely variable, Control system: Mazatrol T-32-3 Pgodpfx Ajzxy Ntengeu 12-tool turret, tailstock included.

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine is being sold due to factory closure. Includes a bar loader. Pjdpfxszx Hv He Angogu