Used Optimum Typ F 105 for sale (36,731)

Condition: used, functionality: fully functional, A used Holdefleiss bottle filling and capping machine, type 12/3. The machine has been set up for 0.5l Euro and 0.33l long-neck bottles, including HDE. The machine is supplied without a pre-evacuation system and features long-tube filling valves. The filling valves will be newly resealed. Both a leakage test and a pressure test will be performed. Dodpfxoyycude Akcjcg

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Dcjdpfeyxr T Tjx Akceg Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), Year of construction: 2015, SSI Schäfer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automated vertical storage lift designed for the efficient storage and order picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-Person Principle: The system automatically brings the requested tray to the access opening, minimizing walking distances for personnel. Space Optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in very high storage density on a minimal footprint. Ergonomics: The access opening (LOGI Gate) can be positioned at various height levels to ensure ergonomic access. Optionally, the tray's reach depth can be further reduced, minimizing operator strain. Software Integration: The vertical storage lift is equipped with a standard PLC controller and can be integrated into customer-specific WMS or ERP systems (such as SAP) via interfaces. The in-house software solution WAMAS® Logimat is also available. Robustness: The system features two helical rack and pinion drives, ensuring robust, precise, and reliable vertical transport of the tray, even with eccentric loading. The SSI Logimat vertical storage lift is used in many industries for storing and retrieving various goods: E-commerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The application areas for vertical storage lift systems are diverse: Small parts storage Inventory management Buffer storage for production Dcodpfxsylmc Uj Akceg Order picking Storage and picking of maintenance and spare parts Storage of work-in-progress/semi-finished products Manufacturer: SSI Schäfer Type: SSI Logimat Type SLL Vertical Storage Lift Serial No. 815.0242-A3 Control unit, PLC-EasyConnect type with touch display Height of storage lift: 6835 mm Width of storage lifts/trays: 4570 mm / 4025 mm Depth of storage lifts/trays: 3092 mm / 815 mm Payload capacity of machine: 2 x 25 t Number of levels/trays: 44 Load capacity per level/tray: 590 kg Storage space size: Adjustable Power supply: 400 V 50 Hz Rated operating current: 24 A Max. power consumption: 17 kVA Total machine weight: 36 t Year of manufacture: 2015 Side panels missing The storage lifts are connected in a block configuration, therefore the inner side panels are missing. Professional dismantling, valued at €5,000 (net), is already fully included in the price. Item location: 37308 Geisleden Enhance your SSI Schäfer storage lift! A storage lift is only as efficient as its internal organization. Our specially designed storage boxes utilize every last millimeter of shelf space in your SSI Schäfer system (e.g., LogiMat). The containers are available in three different sizes (K, M, L) and enable optimal use of the storage space within the lift system. Find the right dimensions for your system in our other listings. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more storage lifts – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, SSI Schäfer Logimat SLL Bearing Lift The SSI Schaefer Logimat SLL is an automatic vertical bearing lift, which ensures efficient loading and handling of small parts after the true personal principle is implemented. There is also a high level of bearing and ergonomic operating comfort. Functions and Vorteile True-to-Person-Prinzip: The System brings the customer support automatically to the Operation, which allows for the personal minimization. Platzoptimierung: Der Logimat misses die Höhe der gegerten Artikel und optimiert dynamic die Lagerhöhe, was zu einer sehr hohen Lagerdichte with minimaler Grundfläche führt. Ergonomics: The operation (LOGI Gate) can be adjusted to higher levels of positioning for an ergonomic design. Optionally, the Eingrifftiefe ins Tablar further be reduced, the Tax for the Operator is reduced. Software Integration: The Lagerlift is with a standard SPS support and can be integrated into the capable WMS or ERP system (with SAP) integrated. The home software solution WAMAS® Logimat supports the development. Robustness: The system is designed to be very sturdy, which ensures a robust, stable and reliable vertical transport of the tabs, as well as exceptional load. The SSI Logimat Lagerlift is available in various branches for the end and after-sales service. Dsdpeyllxzefx Akcscg ECommerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The applications of Lagerliftsystemen since fellfältig: Kleinteilelagerung Article review Puffer bearing for production Auftragszusammenstellung Lagerung und Kommissionierung von Wartungs- und Ersatzteilen Lagerung von unfertigen Erzeugnissen/Halbfabrikaten Technical Dating Repairer: SSI Schaefer Type: SSI Logimat Type SLL Lagerlift Ser.-No. 916.0498-A2 Ser.-No. 916.0498-A3 Steuerung, Type SPS-EasyConnect Touch-Display Höhe Lagerlift: 6835 mm Breite Lagerlifte / Tablar: 4570 mm / 4025 mm Tiefe Lagerlifte / Tablar: 3092 mm / 815 mm Nutzlast Maschine 2x 25 t Anzahl Ebenen/Tabletts 43 Tragfähigkeit pro Ebene/Tablett 590 kg Large adjustable mounting plate Power supply: 400 V 50 Hz Nennbetriebsstrom: 24 A Max. Power supply: 17 kVA Total weight of the machine: 36 t Baujahr: 2016 Seitenwande fehlen The bearing lifts in the junction (block lift system), which are carried out within the walls. The final dismantling cost of € 5,000 (net) is complete after the price has been paid. Article status: 37308 Geisleden Enjoy your SSI Schäfer Lagerlift! A bearing lift is now so efficient with its internal integration. Unsere speziell abgestimmten Lagerkästen utilities die Tablarfläche Ihrer SSI Schäfer Anlage (z.B. LogiMat) bis the last millimeters from. The handles can be adjusted in three different sizes (K, M, L) with optimal use of the bearings in the lifting system. Find out the appropriate Maße für Ihr System in unseren weiteren Auktionen. “Everything in your hand: We will provide you with appropriate bank financing for your project.” komplett-konzept.leasingo.de More bearing lifts - new and used - can be found in our online shop! Internationale Versandkosten auf Anfrage!

Condition: excellent (used), Year of construction: 2016, SSI Schäfer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automated vertical storage lift designed for the efficient storage and order picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-Person Principle: The system automatically brings the requested tray to the access opening, minimizing walking distances for personnel. Space Optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in very high storage density on a minimal footprint. Ergonomics: The access opening (LOGI Gate) can be positioned at various height levels to ensure ergonomic access. Optionally, the tray's reach depth can be further reduced, minimizing operator strain. Software Integration: The storage lift is equipped with a standard PLC controller and can be integrated into customer-specific WMS or ERP systems (such as SAP) via interfaces. The in-house software solution WAMAS® Logimat is also available. Robustness: The system features two helical rack and pinion drives, ensuring robust, precise, and reliable vertical transport of the tray, even with eccentric loading. The SSI Logimat vertical storage system is used in many industries for the storage and retrieval of various goods: E-commerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The applications for vertical storage systems are diverse: Small parts storage Inventory management Buffer storage for production Order picking Storage and order picking of maintenance and spare parts Storage of work in progress/semi-finished products Technical Data Manufacturer: SSI Schäfer Type: SSI Logimat Type SLL Vertical Storage System Serial No. 916.0498-A5 Dodpfx Akjylbyhjcjcg Control unit, PLC-EasyConnect type with touch display Height of storage lift: 6835 mm Width of storage lifts/trays: 4570 mm / 4025 mm Depth of storage lifts/trays: 3092 mm / 815 mm Payload capacity of machine: 2 x 25 t Number of levels/trays: 49 Load capacity per level/tray: 590 kg Storage space size: Adjustable Power supply: 400 V 50 Hz Rated operating current: 24 A Max. power consumption: 17 kVA Total machine weight: 36 t Year of manufacture: 2016 Side panels missing The storage lifts are connected in a block configuration, therefore the inner side panels are missing. Professional dismantling, valued at €5,000 (net), is already fully included in the price. Item location: 37308 Geisleden Enhance your SSI Schäfer storage lift! A storage lift is only as efficient as its internal organization. Our specially designed storage boxes utilize every last millimeter of shelf space in your SSI Schäfer system (e.g., LogiMat). The containers are available in three different sizes (K, M, L) and enable optimal use of the storage space within the lift system. Find the right dimensions for your system in our other listings. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more storage lifts – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, SSI Schäfer Logimat SLL Bearing Lift The SSI Schaefer Logimat SLL is an automatic vertical bearing lift, which ensures efficient loading and handling of small parts after the true personal principle is implemented. There is also a high level of bearing and ergonomic operating comfort. Functions and Vorteile True-to-Person-Prinzip: The System brings the customer support automatically to the Operation, which allows for the personal minimization. Platzoptimierung: Der Logimat misses die Höhe der gegerten Artikel und optimiert dynamic die Lagerhöhe, was zu einer sehr hohen Lagerdichte with minimaler Grundfläche führt. Ergonomics: The operation (LOGI Gate) can be adjusted to higher levels of positioning for an ergonomic design. Optionally, the Eingrifftiefe ins Tablar further be reduced, the Tax for the Operator is reduced. Dsdpfx Akoyllvtocecg Software Integration: The Lagerlift is with a standard SPS support and can be integrated into the capable WMS or ERP system (with SAP) integrated. The home software solution WAMAS® Logimat supports the development. Robustness: The system is designed to be very sturdy, which ensures a robust, stable and reliable vertical transport of the tabs, as well as exceptional load. The SSI Logimat Lagerlift is available in various branches for the end and after-sales service. ECommerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The applications of Lagerliftsystemen since fellfältig: Kleinteilelagerung Article review Puffer bearing for production Auftragszusammenstellung Lagerung und Kommissionierung von Wartungs- und Ersatzteilen Lagerung von unfertigen Erzeugnissen/Halbfabrikaten Repairer: SSI Schaefer Type: SSI Logimat Type SLL Lagerlift Ser.-No. 916.0498-A4 Steuerung, Type SPS-EasyConnect Touch-Display Höhe Lagerlift: 6835 mm Breite Lagerlifte / Tablar: 4570 mm / 4025 mm Tiefe Lagerlifte / Tablar: 3092 mm / 815 mm Nutzlast Maschine 2x 25 t Anzahl Ebenen/Tabletts 47 Tragfähigkeit pro Ebene/Tablett 590 kg Large adjustable mounting plate Power supply: 400 V 50 Hz Nennbetriebsstrom: 24 A Max. Power supply: 17 kVA Total weight of the machine: 36 t Baujahr: 2016 Seitenwande fehlen The bearing lifts in the junction (block lift system), which are carried out within the walls. The final dismantling cost of € 5,000 (net) is complete after the price has been paid. Article status: 37308 Geisleden Enjoy your SSI Schäfer Lagerlift! A bearing lift is now so efficient with its internal integration. Unsere speziell abgestimmten Lagerkästen utilities die Tablarfläche Ihrer SSI Schäfer Anlage (z.B. LogiMat) bis the last millimeters from. The handles can be adjusted in three different sizes (K, M, L) with optimal use of the bearings in the lifting system. Find out the appropriate Maße für Ihr System in unseren weiteren Auktionen. “Everything in your hand: We will provide you with appropriate bank financing for your project.” komplett-konzept.leasingo.de More bearing lifts - new and used - can be found in our online shop! Internationale Versandkosten auf Anfrage!

Condition: excellent (used), Year of construction: 2016, SSI Schäfer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automated vertical storage lift designed for the efficient storage and order picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-Person Principle: The system automatically brings the requested tray to the access opening, minimizing walking distances for personnel. Space Optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in very high storage density on a minimal footprint. Ergonomics: The access opening (LOGI Gate) can be positioned at various height levels to ensure ergonomic access. Optionally, the tray's reach depth can be further reduced, minimizing operator strain. Software Integration: The storage lift is equipped with a standard PLC controller and can be integrated into customer-specific WMS or ERP systems (such as SAP) via interfaces. The in-house software solution WAMAS® Logimat is also available. Robustness: The system features two helical rack and pinion drives, ensuring robust, precise, and reliable vertical transport of the tray, even with eccentric loading. The SSI Logimat vertical storage system is used in many industries for the storage and retrieval of various goods: E-commerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The applications for vertical storage systems are diverse: Small parts storage Inventory management Buffer storage for production Order picking Storage and order picking of maintenance and spare parts Storage of work in progress/semi-finished products Technical Data Manufacturer: SSI Schäfer Type: SSI Logimat Type SLL Vertical Storage System Serial No. 916.0498-A1 Control unit, PLC-EasyConnect type with touch display Height of storage lift: 6835 mm Width of storage lifts/trays: 4570 mm / 4025 mm Dcjdoylmcnopfx Akceg Depth of storage lifts/trays: 3092 mm / 815 mm Payload capacity of machine: 2 x 25 t Number of levels/trays: 44 Load capacity per level/tray: 590 kg Storage space size: Adjustable Power supply: 400 V 50 Hz Rated operating current: 24 A Max. power consumption: 17 kVA Total machine weight: 36 t Year of manufacture: 2016 1 x side panel missing The storage lifts are connected in a block configuration, therefore the inner side panels are missing. Professional dismantling, valued at €5,000 (net), is already fully included in the price. Item location: 37308 Geisleden Enhance your SSI Schäfer storage lift! A storage lift is only as efficient as its internal organization. Our specially designed storage boxes utilize every last millimeter of shelf space in your SSI Schäfer system (e.g., LogiMat). The containers are available in three different sizes (K, M, L) and enable optimal use of the storage space within the lift system. Find the right dimensions for your system in our other listings. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more storage lifts – new and used – in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m - Overband magnet - Hydraulic drive (self-propelled) Dedpjyxkwqjfx Akcecg - Central lubrication Machine is overhauled and immediately available.

Condition: ready for operation (used), Year of construction: 2015, A continuous glass capping machine VTB with gas flushing for twist-off lids is available. Glass volume: 225ml/380ml, capping capacity: 10-60lids/min, product material: stainless steel 1.4301, machine dimensions X/Y/Z: approx. 3000mm/1000mm/2300mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Expected to be available August 2026. Dsdsyxgqmjpfx Akcecg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Equipment: dust extraction, This is a dedusting system with an explosion certificate for hemp dust. The system is installed and the price includes all parts. Dedpjxpm Ausfx Akcecg

Condition: new, NEW -- Ideal for removing plates from yourstanding plate storage.- For internal transport of the plates to thestanding or lyingPanel.- The infinitely height-adjustable support surface canexactly the height of your panel sawbe adjusted.- plates up to max. 250 kg can be used by one operatorbe transported or swung hnical specifications:circulation- standing: approx. 120 - 340 mm- lying: approx. 890 - 1200 mmMax. Plate size: 5200 × 2100 mmCapacity: 250 kg Dcsdpfevwgb Rjx Akcsg

Condition: used, maximum load weight: 6,720 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 02/2021, next inspection (TÜV): 03/2026, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Equipment: ABS, MÖSLEIN TKO 105 D 7m ----VEHICLE HISTORY * FROM FIRST OWNER * GERMAN VEHICLE VEHICLE EQUIPMENT * TYPE: TKO 105 D * BOX BODY * AIR SUSPENSION * SPARE TIRE * ABS * LENGTH: 7.00 m * WIDTH: 2.50 m * HEIGHT: 2.60 m * GROSS VEHICLE WEIGHT: 10,000 kg * UNLADEN WEIGHT: 3,280 kg * PAYLOAD: 6,720 kg * TIRE SIZE: 245/70 R17.5 Dcedpjwg Swhofx Akcjg ---- EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) EXPORT CUSTOMS DECLARATION EXW IN 10 MIN (AUTHORIZED EXPORTER) 5, 15, or 30 DAY PLATES, AND 15 DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATION REQUESTS EXCLUSIVELY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit/guarantee of at least €500 / €1,000 is required. Modifications, errors, and prior sale excepted! Find more vehicles on our homepage. Sale is exclusively subject to our General Terms and Conditions – see homepage. Important note: Despite careful verification of all details in this offer, errors may occur. Some may result from data transfer errors between different platform providers. Therefore, all information is provided without guarantee and is not legally binding. Legal notice: This sales advertisement does not constitute an offer pursuant to §145 BGB. It is intended solely as information for contract initiation. The details provided do not constitute guaranteed characteristics and are without obligation.

Condition: excellent (used), Year of construction: 2017, operating hours: 18,500,000 h, KBA RA105PRO 5+L ALV2 FAPC ref 2967 year 2017 Dcodpfx Aoytunhokcog impressions – 185 million max. output – 17,000 sph CX – 1.2mm Technotrans – Inking unit temperature control BALDWIN washing system Anilox roller 100 l/cm / 80 l/cm KBA VariDry BLUE IR/HotAir BECKER air supply cabinet ErgoTronic Lab ErgoTronic PSO Match ErgoTronic Quality Pass ErgoTronic ACR LogoTronic Professional Technical condition: very good.

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS (Electronic Braking System) - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machine low loader, type: STLT2Z for harvester transport ---- Upcoming! Color freely selectable!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis made of welded steel construction using high-grade fine-grain steels Lashing eyes: 130 kN per side, 5 units each Dodpfx Aksyr Izxjcecg Additional lashing eyes: 3 pairs on the raised bed Insertable stake pocket system made of galvanized steel with aluminum sideboards (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety lock SKF central lubrication system with reservoir (controlled by brake light), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Saddle height: 1,330 mm Ground clearance at driving level: 184 mm Kingpin projection: 600 mm R1 dimension (kingpin to front): 410 mm (swing radius) R2 dimension (kingpin to frame): 2,150 mm (swing radius) Further dimensions available on request (technical drawings) Axles: 2 x 12,000 kg (technical), Gigant with drum brake, in combination with 8 pcs. 245/70 R17.5 premium tires on Alcoa Dura Bright rims Suspension: Pneumatic with lifting and lowering function Second ride height + approx. 50 mm can be activated from the driver’s cab. When speed exceeds 20 km/h, the trailer lowers automatically. Including axle load gauge Coupling device: 2'' kingpin (interchangeable, single position) WITHOUT landing gear! -> Customers typically use a wide wooden beam under the front frame. Brake system: Wabco EBS with axle load measuring system (Smartboard) incl. odometer Parking brake: spring-actuated Lighting system: 2 pairs of tail lights (3-chamber lights) Side marker lights LED Outline marker lights LED Front and rear position lights LED Reversing and auxiliary lights, each in a round design License plate light LED 1 round beacon, plug-in and cab-operated via separate switch 4 x LED work lights 4 x oversize markers, double-secured (wing screw and pin) with LED lighting red/white Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-ahead function. Remote control Tridec (wireless remote), also operable by cable Paintwork: Entire steel structure shot-blasted after welding and primed with special adhesion primer. Subsequent 2-component paint finish in RAL color of choice. Axles and wheel hubs painted black or, for an extra charge, finished in RAL color Other mounted parts are galvanized and/or painted/powder-coated or made of aluminum (with or without anodization) Approval: Including §13 report Including §70 report (customer must provide a suitable and approved 3-axle tractor unit); includes, among other things, turning circle test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Year of construction: 1998, condition: used, Heat Exchanger / Table Cooler Güntner Type S-GFH 066A/2x6L Manufacturer: Hans Güntner GmbH Type: S-GFH 066A/2x6L Year of manufacture: 1998 Dsdpfxsyrdxmo Akcscg Permissible operating overpressure per TRB 401: 16 bar Permissible operating temperature per TRB 401: 95°C Volume in liters: 199 Fan – Type/Number: FH 065 – SDK.41.6 (ZA 121265) Net purchase price: €7,000 plus legally applicable VAT. VAT will be shown separately on our invoice. Subject to change, error and prior sale. Sale is made without warranty or guarantee, exclusively to commercial customers. Enquiries will be processed Monday to Friday from 8 am to 4 pm.

Condition: ready for operation (used), Year of construction: 2000, Handle milling machine, window handle drilling machine, copy router Djdpsynwbtefx Akcecg

Condition: used, Year of construction: 1990, machine/vehicle number: 633, Ablader - Unloader - Sheet Pile Stacker Schneider Maschinenbau AG 1058Year 1990 - Serial-No. 633-1217 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Dodsh Aycqepfx Akcocg Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 740, Joint-setting machine Joachim Brandenburger Type 740Serial-No. 740 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Djdpoh Axibsfx Akcscg

Condition: excellent (used), Automatic filling line Logdos Späth GmbH Type K-DOS.F/AL 40/ EX Dcodpeiyytqsfx Akcjg for filling liquids into buckets, hobbocks, IBC and drums EX protected mobile, movable on rollers compact dimensions : 3m x 2m x 2m (LxWxH) programmable X/Y axis and pallet pattern Very good condition, directly from production!!!

Condition: new, axle configuration: 3 axles, loading space length: 13,510 mm, loading space width: 24,500 mm, suspension: air, tire size: 385/65-22,5, color: black, Equipment: ABS, = Additional Options and Equipment = - EBS - LED lighting - Air suspension - Disc brakes - Toolbox = Remarks = Last stock vehicle!!! -> EXCEPTIONAL ONE-TIME SPECIAL PRICE!!!! Internal reference number for customer inquiries: 1-430 Immediately available PAVIC PRSH 27 flatbed semi-trailer with type 144 pockets and ExTe steel/aluminum telescopic stanchions for the transport of timber and long materials. * Chassis length approx. 13,510 mm (end frame to end frame) * Chassis width approx. 2,540 mm (outer frame to outer frame) * Unladen ride height approx. 1,400 mm with a fifth wheel height of 1,200 mm * Maximum kingpin load approx. 16,000 kg * Front overhang (kingpin to front edge KoRa) 1,550 mm * 2" kingpin exchangeable from below according to SAE standard * E-spare wheel holder for 1 spare wheel * 16 stanchion pockets integrated in the outer frame * Includes 16 steel/aluminum telescopic stanchions type 144 (manufacturer: ExTe) * 8 pockets as storage for plug-in stanchions distributed along the center * Front wall approx. 2,500 mm high, corners bevelled with sheet metal covering * Steel floor, 4/6 mm tread plate covering * Outer frame with rounded corners and lashing holes approximately every 500 mm * First axle lift, automatic function, with start assist * Axle spacing approx. 1,310/1,310 mm * Premium tires 385/65 R 22.5 * EBS braking system with Roll Stability Program * Smartboard/TIM/Info Center, in addition to H+S valve * LED lighting system * LED work lights * 2x plastic toolboxes Financing available through our financial service partners. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Tire size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension Dcodpfx Ajyluzfekcog Rear axle 1: Lifting axle Gross vehicle weight: 40,000 kg Superstructure brand: PAVIC Short Timber Platform Type 144 General condition: very good Technical condition: very good Visual condition: very good

Condition: new, color: green, loading space length: 65,000 mm, loading space width: 25,400 mm, Internal reference number for inquiries: 9-K281 PAVIC hooklift platform with Type 144 pocket and telescopic stanchions for versatile applications. Dcsdpfxoyluyuo Akcjg IMMEDIATELY AVAILABLE! Dimensions approx. 6500x2540mm A robust outer frame made from vehicle construction profiles with cross members, covered with 3mm sheets made of QST690, incorporating recessed stanchion pockets. The front wall consists of a lattice frame covered with 3mm steel sheet and is supported by two vertical front wall supports. Comes with 8 OptiPa telescopic stanchions -> €13,000 net (optional quick-change stanchions available at extra cost) For further questions, our sales team will be happy to assist you. All information without guarantee, subject to error and prior sale. = More information = Damage: none

Condition: used, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO – Unit / Year: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross Dcedpfxsyltv Ue Akceg - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Mulches brushwood and shrubs up to 10 cm Ø - For excavators from 5-10 tonnes - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the carrier vehicle’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Skids, height-adjustable, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 130 Spacer adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. An independent hydraulic power unit is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. An additional double-acting hydraulic connection is needed for the hydraulic hood. The unit is supplied without hoses, connectors, and adapter plate. Financing offers available upon request. We are an official distribution and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are among the largest commercial vehicle dealers in Germany. We offer the full Seppi M. product range! Subject to errors and prior sale! Internal no.: 170048 Contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades Dcjdpeyltvujfx Akcjg - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: new, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10 t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5-10 tonnes - Compatible with various mounting plates - Drive via hydraulic motor, depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along full hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid plates, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL: - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW: Axial piston hydraulic motor with variable displacement Dcedeyltvnjpfx Akcsg 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 Intermediary adapter for BE314 Z1 - approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotation device Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net For operation, an autonomous hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drainage. A double-acting hydraulic connection is additionally needed for the hydraulic hood. The machine is delivered without hoses, fittings, and mounting plate. Mr. Herden (phone) will be happy to assist you. We are also happy to provide a financing offer upon request. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni telehandlers. We are an authorised distribution and service partner for JCB construction machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = More information = Contact Marius Herden for further information.

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Dodpjvg Nfqsfx Akcscg Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics