Used National Formax Double Blow Header for sale (13,007)

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t Duodpfxot Hwxue Aayow dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in Dusdpfx Aajt Hw N Heysw mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Dujdpfxet Hwz Ne Aayow Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min Dedpfx Aevwgm Hoayouw rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller. Duedovwglvopfx Aayew

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Dsdpfsvgvkajx Aayeuw

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES Duodszkub Iopfx Aaysw – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: reconditioned (used), functionality: fully functional, Maximum cutting length: 6000 mm Blade diameter: 500 mm Pneumatic tilting of the cutting heads Dsdpfxozkt Tve Aayouw Radial blade feed

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2440099798, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, total length: 9,000 mm, total width: 2,400 mm, total height: 2,000 mm, saw blade speed: 2,250 rpm, input voltage: 400 V, overall weight: 3,500 kg, controller manufacturer: ELUMATEC, power: 9.2 kW (12.51 HP), input frequency: 50 Hz, operating pressure: 7 bar, ELUMATEC DG 244/E 580/1 Double miter saw - Rated current: 21.8 A - Cutting length: 6000 mm, min. 375 mm at 90° - Swivel range, base position 90°: swivel up to 67.5° inward, 22.5° and 50° outward (140°) - Tilt range, base position 90°: tilt up to 45° inward Dodpfjzktgvjx Aayeuw - Max. cutting range: 390 x 110 mm - Saw blade speed: 2250 rpm - Software option: Software module for crosscuts and overlength, software interface for window programs - Includes two DG 244 extraction systems for extracting aluminum and plastic chips - Roller conveyor: 1.5 m length, 400 mm width for extraction - Includes industrial PC with 1-axis control E580/1 for the cutting length (X-axis) - Includes a selection of various saw blades Note: The item must be collected between September 22nd and 24th, 2026, on a date to be agreed upon. FCA D-76227 Karlsruhe - loaded onto a truck.

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: PUR Corner Rounding Unit: yes Duodpsyilxmsfx Aayjw Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,577 kg, axle configuration: 3 axles, first registration: 02/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, wheelbase: 760 mm, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550 mm. Overall trailer width - 2600mm. Total height (unladen) - 4000 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lifting front axle. 1 insulated ventilation flap in the left hand rear door at the top. Tyres Information Dodpfxozkqdrj Aaysuw Front left - 8 mm Front right - 8 mm Middle left - 12 mm Middle right - 12 mm Rear left - 6 mm Rear right - 6 mm

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Dusdpexq Hkuofx Aayow Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Max Panel Width: 3000 mm Max feed speed: 32 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr Dusdew Idhtspfx Aaysw

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Dusdoy R Ndajpfx Aayjw Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 9 mm Front right - 9 mm Middle left - 10 mm Middle right - 9 mm Rear left - 16 mm Rear right - 16 mm

Condition: used, Colour: White Empty weight: 4.000 kg Dimensions (LxBxH): 500 x 260 x 150 cm - Documentation available: No - CE certificate present: No - Max. working width [mm]: 2700 - Transport dimensions: 5000mm x 2600mm x 1500mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Duodpfxezi U Ufs Aayow Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Colour: Grey Empty weight: 4.500 kg Dsdpfxszi U T Is Aayjuw Dimensions (LxBxH): 500 x 290 x 180 cm - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 6574 - Max. working width [mm]: 2800 - Transport dimensions: 5000mm x 2900mm x 1800mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm Dusdpfx Asdy Hqvsayow 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: used, machine/vehicle number: 008430, Position 1: Panel Feeding and Loading MAHROS + STEFANI-RUNNER + EVOLUTION Position 2: Double Sided Squaring/Edgebanding Machines MAHROS + STEFANI-RUNNER + EVOLUTION Dodpfjyqxx Ssx Aayeuw Position 3: Panel Stacking and Offloading MAHROS + STEFANI-RUNNER + EVOLUTION

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 03/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 8 mm Middle right - 7 mm Rear left - 9 mm Dusdpfozi Nkbex Aaysw Rear right - 7 mm

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Dsdpfx Ajziwnneayeuw Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: used, mileage: 1,037,357 km, power: 375 kW (509.86 HP), first registration: 12/2019, fuel type: diesel, emission class: euro6, color: yellow, brakes: retarder, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Climate control - Double glazing - DVD - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Individual air cooling Duedpfx Aaey Hwrwsyow - Individual lighting - Reverse camera - Sun visor - Tachograph - TV/Video = More information = Engine capacity: 12.809 cc Dimensions (LxBxH): 1400 x 400 x 255 cm Make of engine: Mercedes Benz

Condition: used, mileage: 1,244,593 km, power: 375 kW (509.86 HP), first registration: 09/2019, fuel type: diesel, gearing type: automatic, emission class: euro6, color: grey, brakes: retarder, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Climate control - Coffee-machine - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Kitchen - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video = More information = Dusdpey Hw T Isfx Aayew Engine capacity: 12.809 cc Dimensions (LxBxH): 1400 x 400 x 244 cm Make of engine: Mercedes Benz

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you. Tel: A50 Front axle with increased load capacity, AR5 axle ratio i = 4.727, BA3 Active Brake Assist, C6L multifunction steering wheel, C71 underride guard (EU-compliant), CB8 Level II stabilisation, CL1 steering wheel adjustable in height and tilt, CW2 deletion of vehicle lowering, E07 hill start assist, E1D digital radio (DAB), E1U USB socket 5V, E3J pre-installation switch panel, E43 13-pin trailer socket, E7B pre-installation navigation, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, ED8 pre-installation electrics, programmable special module, EK1 terminal strip for electrical connection, ES0 starting aid contact, F2W winter package, F35 rear window, F3F gear selector console optimized for co-driver, F61 interior mirror, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF0 coat hook in passenger compartment, FF5 shelf above windscreen, FHL double cab, FJ4 stowage compartment under dashboard, FM3 wet wiper system, GD8 6-speed manual transmission ECO Gear 360, H12 additional hot water heater, H15 co-driver's seat heating, H16 driver's seat heating, H1B tachograph operation front under roof liner, H21 heat-insulating glass with band filter at the windscreen, HH9 semi-automatic climate control TEMPMATIC, JF1 rain sensor, JG0 shift point indicator, JH3 communication module (LTE) for digital services, JI7 initial service interval 60,000 km, JK5 color display instrument cluster, JS2 intelligent speed assist, JV7 pre-installation for two-tone horn system, JW8 ATTENTION ASSIST, KB7 main tank 93 liters, L left-hand drive, L07 outline marker lamps, L72 electrics for bodybuilder interface, L94 deletion of parking lights, LA2 headlight assist, LB1 side marker lights, LE1 adaptive brake light, LV1 pre-installation for rotating beacon, M26 speed limiter 150 km/h, M60 generator 14 V / 250 A, M72 vehicle HVO-compatible, MJ8 ECO start-stop function, MS1 cruise control, MT5 emission class EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800 rpm, O1N activation of reversing camera without guide lines, O94 body width outside edge 2150mm +/-50mm, O97 rear section overhang from body 1700mm +/-100mm, OB2 activation of Blind Spot Assist, PP1 platform body, Q11 longitudinal member reinforcement, Q18 bolted rear crossmember, QA7 tow bar for increased towing capacity 3.5 t, R65 spare wheel holder at frame end, R87 spare wheel, RH2 tyres 235/65 R16 C, RM0 all-season tyres, RS3 steel wheels 6.5 J x 16, RX1 wheels without brand specification, RY2 wireless tyre pressure monitoring front and rear axle, RZ2 wheels by Magnetto Wheels, S02 driver’s seat, S22 armrest for driver’s seat, S23 twin passenger seat, SA5 driver’s airbag, SA6 co-driver’s airbag, SK2 driver seat occupancy detection, T75 entry grab handles for driver and co-driver, V07 rear wall paneling, V85 smoker package, VF7 fabric "Maturin" black, W70 tinted rear glazing, black glass Dedpfx Aezkx Tnoayeuw We are happy to make you an offer for the trade-in of your used vehicle. Should you be interested in leasing or financing, we will gladly provide you with a tailored offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewings strictly by prior arrangement! All information without guarantee, subject to errors and prior sale! Images for illustration purposes only! Deviations from listing descriptions or...

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope Duodpexq R Haefx Aayew of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm Dusdpfxew U Ekpo Aaysw no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system