Used Milacron Elektron Evo 350 for sale (6,788)

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Knedpfx Acefg E Hzscsc Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications Knodpfjfg E H Ssx Accjc New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and Ksdpfx Acefg E Ibocsnc safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,285 t dimensions 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Knsdpfxsfc T Ugj Accec Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator Knsdsfgyicjpfx Accjc · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Knodpfeuddcgsx Accoc Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, mileage: 30 km, power: 96 kW (130.52 HP), first registration: 09/2026, fuel type: diesel, wheelbase: 3,750 mm, color: white, number of seats: 3, loading space volume: 12 m³, loading space length: 3,500 mm, loading space width: 1,780 mm, loading space height: 1,886 mm, construction height: 2,530 mm, working width: 2,059 mm, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, sliding door, soot filter, traction control, Automatic climate control, central locking with remote control, exterior mirrors electrically adjustable and heated, electric windows, on-board computer, driver assistance system: hill start assist, driver assistance system: lane keeping assist, driver assistance system: emergency brake assist, driver assistance system: lane keeping assist with driver drowsiness detection, speed control system (cruise control), steering wheel (leather), parking pilot system front and rear, reversing camera, spare wheel with road tires, heated windshield, windshield wipers with rain sensor, daytime running lights, fog lights, audio system 13: digital radio reception (DAB/DAB+) with 4 multifunction display, audio system: radio with USB and Bluetooth hands-free system, hands-free system, tinted heat-reflecting glass, seat heating, anti-lock braking system (ABS), electronic stability program (ESP), seats in the driver's cab: driver's seat with lumbar support, start/stop system, diesel particulate filter, service booklet available, sliding door loading/passenger compartment on the right, steel rims 6.5x16, seat package 8A: driver's seat (4-way adjustable) - passenger double seat - fabric, preparation for trailer coupling, electrical (socket and cable), paint: frost white, interior trim in the loading/passenger compartment: high, driver's seat armrest, floor covering: vinyl in the loading/passenger compartment, interior trim in the loading/passenger compartment: vinyl, headlight assistant with day/night sensor, second key with folding remote control, driver assistance system: intelligent speed control, DPF regenerator manual, parking brake electric, cargo compartment light LED, exterior lights rear top LED, technology package 2, audio/radio remote control on the steering wheel, docking station (MyFord Dock), permissible total weight 3.50 t, body variant: medium-high roof, radiator grille with chrome trim, rear step integrated, trailer stabilization program (TSA), turn signal in exterior mirror, cornering light in headlight, windshield wipers with intermittent operation - adjustable, mud flaps rear, digital radio reception (DAB+), radio preparation - 4 speakers, FordPass Connect incl. eCall, roll stability control (RSC), storage compartment in the roof liner of the driver's cab, air conditioning, heating with recirculating air function, auxiliary heating electric, My Key (2nd vehicle key programmable), rear wing doors (opening angle 180 degrees), entry lights, lashing eyes (10), gear/selector lever handle leather, electronic brake force distribution (EBD), steering column (steering wheel) adjustable in height/length, electronic traction control, driver assistance system: crosswind assist, Trend, body/structure: high-roof van standard, wheelbase 3750 mm, type of drive: front-wheel drive, transmission 6-speed, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will gladly advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge, export license plates available here, trade-in of your old vehicle, retrofitting of: - trailer couplings up to 3500 kg possible - auxiliary heaters - screen for reversing camera or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of Knjdez Dh D Tepfx Accec

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - Track width: 300mm - Shaft width: 300mm - Max cutting height: 120mm - Max blade diameter: 350mm - Blade bore diameter: 70mm - Top: - 2 rows of pawls/ejectors - Smooth, sliding pressure shaft - Pawls/ejectors - Pressure pad - Shaft with saws - Pressure pad - Smooth, sliding pressure shaft Kedpfxjzx U Iqj Accenc - Bottom: - Guide rail - Pawls/ejectors - Track - 1 feed speed + variable - Main motor power: 22kW - Feed motor: 2kW - Central lubrication - Laser - Diameter of extraction nozzle: 250mm - Table dimensions (length/width): 2000x710mm - Dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,474 mm, total height: 2,547 mm, loading space length: 3,533 mm, loading space width: 1,784 mm, loading space height: 1,886 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 4659.TZ25.RA02292---- Errors and prior sales excepted! SPECIAL EQUIPMENT * Airbag (passenger side) * Interior mirror incl. heated rear window * Load compartment protection package 1: Load compartment floor "Easy Clean" - Wheel arch lining - High side wall lining * LED lights in the load compartment * Socket: 12-volt connection in the load compartment (D-pillar) * Partition (metal) with window Kedpfx Acozyd Dwscjnc * Central locking with remote control - additionally with a second key, foldable, with remote control OTHER EQUIPMENT * 1 battery * Axle load increase - front to 1850 kg * Airbag driver side * Anti-lock braking system with electronic brake-force distribution incl. ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake assist incl. emergency brake light * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Battery: Battery runtime, programming of battery runtime to 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Power windows - with quick-down/-up function for driver side * Ford Easy Fuel - Convenient fuel filler and misfueling protection * Generator, high-performance version * Glove compartment with lockable lid * Interior lighting with delay function with reading lamps in the front * Air conditioning in the front incl. dust and pollen filter * Fuel tank 70 l * Load compartment lighting * Steering wheel: Artificial leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency call assistant * Package: Technology package 9 - Windshield, heated - Windshield wiper with rain sensor - Park pilot system front and rear - Emergency brake assist, active (camera-based) - Lane keeping assist with driver drowsiness warning and automatic high beam assist, additionally with lane departure warning - Headlight assistant with day/night sensor - Cruise control - Fog lights - Ford audio system * Particle filter: Diesel particulate filter * Radio: Ford audio system with radio and DAB+ - MyFord Dock - FordPass Connect - Speakers, antenna - Audio remote control on the steering wheel - Bluetooth interface - USB connection - Hands-free system * Wheels: Wheel covers * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Headlights: Halogen headlights with daytime running lights * Sliding door entry light automatically when door is opened * Sliding door, right * Rear mud flaps * Side protection strips * Power steering * Safety belts - Seat belt tensioners and force limiters in the front * Seats: Seat package 13 - Driver seat, 4-way adjustable - Double passenger seat with storage compartment under individually folding seat cushions - Headrests, height-adjustable - Tray integrated in the double passenger seat (foldable) - Inner armrest for driver - Lumbar support, manual (driver seat) - Seat cover: Fabric * Start-stop system * Rear bumper, with integrated step * Partition (plastic) at the height of the B-pillar * Recirculation mode * Tie-down points * Immobilizer * Heat-reflective glazing, lightly tinted * Central locking with remote control * Second key with remote control * Overhead storage compartment in the front ...and more.---

Condition: good (used), For sale is our Minipack FM76A hooded shrink wrapping machine. Type: FM76 A EVO Year of manufacture: 2018 It features a sealing bar of 540 x 390 mm, achieves a performance of up to 700 units per hour, and is ideal for efficient, space-saving shrink wrapping in commercial and industrial applications. Technical data: Knjdjz Eiarjpfx Accoc Sealing bar: 540 x 390 mm Max. product size: 500 x 380 x 200 mm (up to 15 kg) Hourly output: 0–700 units/h Power supply: 200–400 V (3 phases) Machine weight: approx. 174 kg

Condition: used, machine/vehicle number: 26752, Year of construction: 2022, operating hours: 6,027 h, load capacity: 1,600 kg, lifting height: 3,145 mm, free lift: 1,518 mm, fuel type: electric, mast type: duplex, construction height: 2,130 mm, Equipment: sideshift, .: 26752 Device details: Year of manufacture: 2022 Load capacity: 1600 kg Lifting height: 3145 mm Recorded operating hours: 6027 h Free lift: 1518 mm Mast type: Duplex Mast height: 2130 mm Length/Width/Height: 2006 / 1090 / 2121 mm Operating weight: 3459 kg Battery from: 2022 ---- Equipment: * Overhead guard * 3rd valve * Full free lift * Work lights (front) * Non-marking tires ----- Attachments: * Side shifter ---- Additional device information: Bluespot Single-pedal operation ---- The operating hours are generally the recorded hours. We will be happy to offer you suitable transport. Knodjz Iaqtopfx Accjc We have another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We will gladly buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Intermediate sale and errors are expressly reserved for this offer. In the dealer business, the device is sold in its AS IS condition, without refurbishment. All information is without guarantee, subject to errors and changes.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,985 h, load capacity: 1,800 kg, lifting height: 4,650 mm, fuel type: electric, mast type: telescopic, construction height: 2,850 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 140/55 - 9, overall weight: 3,669 kg, total height: 2,850 mm, total length: 1,950 mm, total width: 1,200 mm, fuel: electricity, Equipment: sideshift, LINDE E 18-02 EVO / 386 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.650 mm Closed height: 2.850 mm Mast: Standard (2W465) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah v. 2018 Charger: 48 V 70 A not tested Tyres: Superelastik 200/50 - 10 %) Service weight: 3.669 kg Length: 1.950 mm Width: 1.200 mm Year of manufacture: 2018 Operating hours: 3.985 h Condition: working condition EQUIPMENT Knjdpfxjz Apu Hj Accoc 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1308893 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 10,030 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,470 mm, fuel type: gas, mast type: triplex, construction height: 2,140 mm, motor manufacturer: VW, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,200 kg, total height: 2,140 mm, total length: 2,150 mm, total width: 1,150 mm, fuel: liquid petroleum gas (LPG), LINDE H 18 T - 01 EVO – LPG forklifts TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.625 mm Closed height: 2.140 mm Free lift: 1.470 mm Mast: Triplex (3F462) Fork carriage: FEM 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 200/50 - 10 (70%) / 18 x 7 - 8 (70%) Service weight: 3.200 kg Length: 2.150 mm Width: 1.150 mm Year of manufacture: 2019 Operating hours: 10.030 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights Knodpfez Aqcrex Accec Internal no.: 1202067 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, mileage: 145,000 km, power: 125 kW (169.95 HP), first registration: 06/2023, fuel type: diesel, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Knodpfx Acoz H D E Sscsc 2nd battery, airbag on passenger side, audio navigation system, audio system: radio with 12" multi-function display, automatic climate control, exterior mirrors, electrically foldable, floor covering: vinyl in the cargo/passenger compartment, speed limiter 130 km/h, rear wing doors without glazing (opening angle 256 degrees), cargo area light LED, cargo area partition, metal, tire repair kit, seat package 14: driver's seat (4-way adjustable) - passenger single seat (4-way adjustable) including seat heating, fabric, seats in the cab: driver's seat with lumbar support, seats in the cab: passenger seat with lumbar support, steel rims 6.5x16, technology package 10, audio system: radio with 4" multi-function display, parking pilot system front and rear, exterior lights rear top LED, trim in the cargo/passenger compartment: high, trim in the cargo/passenger compartment: vinyl Additional equipment: Storage compartment in the headliner of the cab, trailer stabilization program (TSA), audio system 13: digital radio reception (DAB / DAB+) with 4" multi-function display, audio system: radio with USB and Bluetooth hands-free system, audio/radio remote control on the steering wheel, docking station (MyFord Dock), radio preparation, 4 speakers, exterior mirrors, electrically adjustable and heated, turn signal integrated in the exterior mirror, on-board computer, entry lights, electronic brake force distribution (EBD), electronic traction control, FordPass Connect including eCall, rear wing doors (opening angle 180 degrees), heater with recirculation, body/superstructure: high-roof standard van, body variant: medium-height roof, radiator grille with chrome trim, steering column (steering wheel) height/length adjustable, engine 2.0 L - 125 kW TDCi CAT, My Key (2nd vehicle key programmable), parking pilot system front and rear, digital radio reception (DAB+), wheelbase 3750 mm, low emissions according to exhaust standard Euro 6d-TEMP, gear/selector lever handle, leather, windshield wipers with intermittent operation, adjustable, sliding door cargo/passenger compartment right, mud flaps rear, side protection strips, start/stop system, Trend, rear step integrated, lashing eyes (10), roll stability control (RSC), heat protection glazing slightly tinted, auxiliary heater, electric

Condition: good (used), Cast iron marbles Kjdpfx Aoz H Ixvsccjnc Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T 2 same plates available.

Condition: used, mileage: 55,158 km, power: 96 kW (130.52 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,954 mm, next inspection (TÜV): 07/2028, color: white, emission class: euro6, number of seats: 3, loading space volume: 20.8 m³, loading space length: 4,300 mm, loading space width: 2,200 mm, loading space height: 2,195 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, tail-lift, traction control, Tailgate lift with a capacity of up to 750 kg, newly installed, tarpaulin cover, wind deflector, air conditioning, central locking with remote control, exterior mirrors, electrically adjustable and heated - long support arm, electric windows, on-board computer, hill start assist, cruise control, speed limiter (120 km/h), multi-function leather steering wheel, spare wheel with road tires, heated windshield, light sensor, daytime running lights, fog lights, audio/radio remote control on the steering wheel, radio with USB and Bluetooth hands-free system, long wheelbase, heat-insulating glazing, storage compartment package, tachometer, driver's airbag, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, center armrest, seat package 13: driver's comfort seat with armrest and lumbar support, start/stop system, particulate filter, electronic immobilizer, outside temperature display, power steering, sliding tarpaulin on the right, turn signal integrated in the exterior mirror, second key with foldable remote control, visibility package 1, exterior mirrors electrically adjustable and heated, double passenger seat, black-grey radiator grille, radiator grille with chrome trim, storage compartment in the cab ceiling, lockable glove compartment, heater with recirculation, My Key (2nd vehicle key programmable), interior lights in the cab: front reading light, docking station (MyFord Dock), electronic brake force distribution (EBD), steering column (steering wheel) adjustable in height/length, electronic traction control, crosswind assist, programmable battery monitoring, reinforced generator, Trend, body/superstructure: platform with sliding tarpaulin, wheelbase 3954 mm, drive type: rear-wheel drive, transmission 6-speed, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. The listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available on site. Trade-in of your old vehicle. Retrofitting of: - trailer couplings, also up to 3500 kg - auxiliary heaters - screen for rear view camera or navigation via mobile phone (Android Auto) - reversing system with rear view camera - workshop equipment - cruise control - retrofitting a tailgate lift and other individual solutions for your business needs possible for an extra charge. Kjdpfoz Erc Aex Acconc

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Knedpjz A Ubijfx Accec Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. Kjdpeyililjfx Accsnc This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve Knsdpfx Acedqkrwecoc - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: used, mileage: 164,226 km, power: 92 kW (125.09 HP), first registration: 10/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ? Ford Transit L2 ? Box van ? First owner ? German vehicle ? Air conditioning ? 6-speed transmission ? 3 seats ? Multifunction steering wheel ? Electric windows ? Payload: 1200 kg ? Tires 75%? Spare tire ? 2 rear doors ? Interior dimensions: L: 3.50m..W: 2.05m..H: 2.10m ? Euro 5 Kedpjy Dzlvofx Accenc ? MOT valid until 10/2026 Special equipment: Airbag, passenger side, Audio system: radio/CD player with multi-function display, Exterior mirrors with long support arm, Digital tachograph, Configuration with specific central locking, Seat package 7: driver's seat (4-way adjustable) - passenger double seat, fabric Additional equipment: 2nd battery, Storage compartment in the headliner of the cab, Airbag, driver side, Anti-slip regulation (ASR), Turn signal integrated into the exterior mirror, On-board computer, Headliner in the passenger compartment, Rev counter, Electronic brake-force distribution (EBD), Electronic differential lock (EDS), Driving assistance system: hill start assist, Generator 150 A, Heater with recirculation, Body/superstructure: standard platform, Steering column (steering wheel) adjustable in height/length, Headlight range control, Engine 2.2 Ltr. - 92 kW TDCi CAT, Production site: Otosan, Wheelbase 3504 mm, Spare wheel with regular tires, Low emissions according to exhaust standard Stage 5 / Euro 5, Steel rims 6.5x16, Front panel extension, aluminum platform, Bumper partially painted, Tinted glass

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26009, Year of construction: 2018, operating hours: 16,731 h, load capacity: 7,000 kg, lifting height: 6,650 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,350 mm, motor manufacturer: VW, fork length: 2,000 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: UVV, cabin, lighting, sideshift, Triplex mast with full free lift, height: 3350 mm, lift height: 6650 mm, load capacity: 7000 kg at load center: 600 mm, CAM fork positioner with new sideshift, forks length: 2000 mm (new), LED work lights front and rear, road lighting according to German Road Traffic Regulations (StVZO), fully enclosed cab with heating, comfort swivel seat, VW LPG engine, double pedal foot controls, 4x solid SE tires, operating manual included. Technical condition at sale: Forklift is technically overhauled! Major service newly performed! UVV safety inspection passed without defects! Delivery: In perfect condition! 20 years of professional experience! Knsdpfx Aey I Dmdeccsc INSPECTION AND TEST DRIVE: Available by appointment during business hours: Monday to Friday 8:00 am - 6:00 pm, Saturday 8:00 am - 1:00 pm. TRANSPORT: Low-loader or tarpaulin truck available at favorable rates.

Condition: used, mileage: 105,300 km, power: 96 kW (130.52 HP), first registration: 01/2021, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,100 mm, Year of construction: 2021, - Used Truck: Ford Transit 350, Twin-wheel configuration with a three-way tipper body - Registration: 01.2021, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed gearbox, Mileage: 105,000 km. - Gross Vehicle Weight: 35 Quintals, Payload: 10 Quintals, Twin rear wheels, Leaf spring reinforcement kit. - Equipment: Cantoni three-way tipper body, External dimensions: 3,300 x 2,100 mm, Sideboards height: 400 mm, Lifting mechanism with No. 5 hydraulic cylinders, Front pole carrier with net, Rear pole carrier, No. 2 cable winch, Rear light protection net, Spare wheel. - Equipment includes: Air conditioning, Radio-Bluetooth, USB port and smartphone holder, Start-Stop system, On-board computer, Central locking, Two keys, Driver airbag. - Bodywork and interior in excellent condition, Mechanics with a 12-month dealer warranty. - Front tires: NEW, Rear tires: 90% - Unique vehicle - Single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified mileage. - Road test possible by appointment. - Ownership transfer can be arranged on site. - Customized financing options available. Carlo Mauri Srl disclaims any responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual commitment. Prices are quoted excluding VAT and ownership transfer fees. Ksdpfx Acey Eqdbjcjnc

Condition: used, mileage: 49,986 km, power: 125 kW (169.95 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1225. NG10270 ----EQUIPMENT * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated, and foldable – with integrated indicators * Load compartment floor: 'Easy Clean' vinyl flooring * Load compartment protection package 1 – 'Easy Clean' load floor – wheel arch covers – high sidewall cladding * Tire pressure monitoring system * High sidewall cladding up to the roof * Partition wall (metal) * Transmission: 6-speed manual gearbox * Anti-lock braking system with electronic brake-force distribution (EBD) incl. – Electronic Safety and Stability Program (ESP) with traction control (TCS) – Hill start assist – Crosswind assist – Emergency brake assist – Rollover protection – Emergency brake support incl. emergency brake light * Airbag driver’s side * Exterior mirrors, electrically adjustable and heated – with integrated indicators * Battery: battery runtime, programmable runtime up to 10 min * On-board computer with consumption and mileage data (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * High roof * Twin rear wing doors with 256° opening angle (no windows) with retaining magnets * Tachometer * Third brake light * Power windows front, electric – with quickdown/-up function for driver's side * Ford Easy Fuel – comfort fuel filler and misfueling prevention * Alternator, high-output version * Headlights, dipped beam: halogen headlights with daytime running lights * Lockable glove box * Interior lighting with timer and front reading lights * Air conditioning front incl. dust and pollen filter * Fuel tank 70 liters * Paintwork: solid paint * Load area lighting * Steering wheel: synthetic leather steering wheel * Steering column, adjustable for height and reach * MyKey key system – individually programmable spare key * Fog lights * Emergency call assist * Technology package 9 – Heated windshield – Rain-sensing wipers – Front and rear park pilot system – Active emergency brake assist (camera-based) – Lane keeping assist with driver alert and high-beam assist, additionally with lane keeping aid – Headlight assist with day/night sensor – Cruise control – Fog lights – Ford audio system * Particulate filter: diesel particulate filter * Radio: Ford audio system with radio and DAB+ – Radio (FM/AM) – Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) – MyFord Dock – FordPass Connect – Speakers, antenna – Audio remote control on steering wheel – Bluetooth interface – USB port – Hands-free system * Sliding door entry light, automatically activated when door opens * Sliding door: sliding door, right * Rear mudflaps * Side protective mouldings * Power steering * Seat belts – belt tensioners and force limiters front * Seat package 13 – Driver’s seat, 4-way adjustable (forwards/backwards, backrest, seat cushion tilt, height) – Dual passenger seat with storage compartment under individually foldable seat cushions – Height-adjustable headrests – Integrated tray table in dual passenger seat (fold-out) – Driver’s inside armrest – Manual lumbar support (driver’s seat) – Seat upholstery: fabric * Start-stop system * Partition wall (plastic) at B-pillar height * Rear bumper with integrated step * Air recirculation system * Lashing eyes * Immobilizer Ksdpfsxquzzox Accenc * Heat-insulating, lightly tinted glazing * Central locking with remote control * Overhead storage compartment front ... and much more.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop Kjdpfoxaatbox Acconc - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm Knsdpfx Acsxaav Ajcsc turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice