Used Mil-Tek Plastic Baler for sale (11,111)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Hodpfxozr Hzis Aitenu Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Hnjdpfxezvdfms Aitju Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Condition: used equipment (not new/factory), functions normally, tested and operational.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter Hnedpfx Aiozukp Ajtju -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: good (used), Dry sorting line with 22 pockets. Hjdpfx Ajzuk T Usitonu

Condition: used, Transport platform K140 1-82745500 €329 Weight per unit: 21 kg 4 swivel shackles €1,291 1774874610 Weight per unit: 2.35 kg The invoice can be found in the documents! Hsdpfeztw Iiox Aitenu

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Hnjdozub Hrspfx Aitsu Machine weight: 18,000 kg.

Condition: new, Year of construction: 2024, functionality: fully functional, UNITEK NICE 950 2N RKRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Sanding roller, rubber-coated, Ø 150 Finishing pad 50 mm Sanding belt motor power 15 HP Sanding belt speed 18/16 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning rollers Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 2 pcs. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Belt motor power 20 HP Automatic conveyor belt centering Oscillating cleaning blower, timer-controlled, 2 pcs. UNITEK NICE 950 1N KRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Hodjznwp Ajpfx Aitsnu Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 1 pc. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Oscillating cleaning blower, timer-controlled UNITEK NICE 650 1N KRT Working width 650 mm Sanding belt size width x length 670 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/sec Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Self-centering of sanding belts using the system “ECO GEAR SYSTEM” Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness 2 rollers on infeed and outfeed table 1 dust extraction port Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Mobile cleaning blower for the sanding belt Warranty 12 months on spare parts.

Year of construction: 2024, condition: new, Stacker sorting line, lifting of finished lumber packages. Hnodpfszbxywsx Aiteu

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab STARlet M The unit is in full working condition and ready for immediate use. Software is included A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Hedpoy Ex Uqjfx Aitsnu Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, axle configuration: 3 axles, first registration: 06/2002, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75r17,5, wheelbase: 1,350 mm, Year of construction: 2002, Drivetrain Hodpfjy E N Smox Aitonu Drive: Wheel Axle configuration Tyre size: 235/75r17,5 Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Rear axle 3: Double wheels Weights Empty weight: 8.880 kg Carrying capacity: 48.120 kg GVW: 57.000 kg Functional Make of bodywork: ROBUSTE-KAISER Height of cargo floor: 88 cm

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Hsdpsy Hq Rtefx Aitenu

Condition: used, This listing is for 1 Box Hamilton Microlab 600 series Accessories Hsdexhfbyjpfx Aitsnu The units are in full working condition and is ready for immediate use

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Hnodpfxjxhfpdj Aiteu Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, This listing is for the Restek Single Position Base Plate Gas Filter Kit + SGT Gas Filter Kit Hnjdpoxv Dk Nsfx Aitju The unit is in full working condition and is ready for immediate use The Restek Single Position Base Plate Gas Filter Kit is a modular system designed for gas purification in laboratory applications, particularly in gas chromatography (GC) and mass spectrometry (MS) systems. Key Features Baseplate Design: The single-position baseplate (catalogue number 22025) is constructed from brass and measures 10.2 × 10.2 × 4.8 cm. It is compatible with all standalone Super Clean gas filters Filter Cartridges: Restek offers various filter cartridges, such as the triple filter that removes oxygen, moisture, and hydrocarbon impurities, and the fuel gas filter designed for moisture and hydrocarbon removal. Fitting Compatibility: The baseplate accepts 1/8" tubing. To adapt to 1/4" tubing, 1/8" to 1/4" tube end reducers are available. Material Options: End fittings are available in brass or stainless steel, allowing for customization based on application requirements Restek SGT Superclean Gas Filter Kit The Restek SGT Superclean Gas Filter Kit is a high-purity gas purification system designed to remove contaminants such as moisture, oxygen, and hydrocarbons from carrier and fuel gases used in gas chromatography (GC) and mass spectrometry (MS). This kit is particularly beneficial for applications requiring ultra-pure gas supplies to ensure accurate and reliable analytical results. Key Features High-Purity Output: Delivers gas purity levels exceeding 99.9999%, depending on the incoming gas quality and flow rate. Versatile Compatibility: Compatible with various gas types, including inert carrier gases, air, hydrogen, and helium. Quick-Connect Design: Features a user-friendly quick-connect system for easy and leak-free filter cartridge changes. Durable Construction: Constructed with a glass interior to prevent diffusion and a polycarbonate exterior for safety. Visual Indicator: Each filter cartridge includes an easy-to-read color change indicator to signal when replacement is necessary.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,600 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing Hodpfx Aijx D Dx Aotjnu • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system Hnedpeyy Npnefx Aitsu • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2002, gebraucht 2002 4543 prompt, Zwischenverkauf v Spanien 11400 € 1 50 - 1700 (12) U/min ISO 40 Hnsdpsyrhn Esfx Aiteu 600/210/400 mm 800 x 225 mm 1700 mm 1500 mm 1960 mm 950 kg 1,5 kW with 3-Axis Digital display Fabr. Time Technology Europe Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing and 1 pc. long milling arbor Coolant device Machine light automatic feeds in X and Y Machine feet with vibration absorbers no User Manual DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m Hnsdpfeu Idmvjx Aitsu dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: like new (used), Year of construction: 2021, functionality: fully functional, ROLLER Hnedsz Nwtcopfx Aitou ROLLER WITH TAMPER BRUSH FOR CLEANING WORKPIECES

Condition: ready for operation (used), Unitek 406 TVD-200-16 / TVD6-200-16 K Compact Transistor Regulator SN:005389, used, normal signs of use, 100% functional, scope of delivery as per photos Hsdpez Adgdjfx Aitenu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2008 Hsdpfez D Hb Dex Aitsnu Travel distances: X = 350 mm, Y = 250 mm, Z = 250 mm Max. workpiece size: X = 800 mm, Y = 500 mm, Z = 265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table - chuck: 230 - 480 mm APG FORM Generator - working current 72 amps Best achievable surface roughness Ra 0.2 µm Includes pneumatic chuck Erowa ITS 50 Includes 4-position electrode changer in magazine Machine weight (net): 2000 kg Machine dimensions (L x W x H): 1300 x 1850 x 2500 mm The machine has already been cleaned, serviced, and thoroughly tested. We would also be happy to commission the machine for you.

Condition: good (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, table width: 450 mm, overall weight: 2,100 kg, table length: 680 mm, Equipment: documentation/manual, 3-axis erosion machine. Hnsdjz D Na Nspfx Aitou

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Hnsdpfx Aijz Ecfhstsu Grinding table 2500 x 930 Includes existing grinding belts.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Sinker EDM machine GF AgieCharmilles Spirit 4 Year of manufacture: 2008 Travel ranges (X/Y/Z): 700 x 500 x 400 mm Max. workpiece dimensions: 920 x 550 x 370 mm Max. workpiece weight: 2000 kg Distance table - quill: 215 - 615 mm Bath level up to 415 mm Includes pneumatic chuck of the 3R system or Erowa ITS 50 (customer’s choice) Includes 15-position electrode changer in magazine Hedez D Apdjpfx Aitsnu Max. electrode weight: 80 kg Includes C-axis with U = 0-40 rpm Total weight (without dielectric fluid): 4000 kg Dimensions: 3000 x 3000 x 2865 mm After receiving your order, the machine will be cleaned, serviced, and tested by us. We would be pleased to offer you the following additional services and products: - Commissioning - Transportation - Training - Clamping devices - Dielectric fluid - Cooling unit

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Hsdpfxez Dv Dne Aitsnu