Used Microturn Bnc 1840 for sale (218)

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Technical data: - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW - Table height mm - Space requirement incl. back gauge, without front support arms, without safety guard - approx. W 3800 x H 1840 x D 2350 mm Gjdpfoq R T U Dsx Angouh - Weight approx. 7500 kg

Condition: used, mileage: 29,885 km, power: 290 kW (394.29 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Mtlg. house, suspension seat, electric mirror, heated mirror, electric window left, electric window right, air conditioning, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), constant throttle, differential lock, leaf air suspension, tow bar air + light, aluminum tank, under-body protection, roof hatch, crane behind house, emergency stop, grapple control, high stand, 2-point support hydraulic, 2x hydraulic. Extensions, green environmental badge Wheelbase: 4800 mm Structure: with used crane Palfinger PK 12001 L, 8.7m - 1.22t, high stand and used flatbed 4.5-5.5m long 7.5t front axle, rear axle crown gear 440 Hypoid 13t, electronic braking system with ABS and ASR, disc brakes with partial protection on front and rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front axle, front underrun protection made of aluminum, residual heat utilization, light sensor, comfort locking system, economy/power driving program, navigation system, multimedia cockpit, preparation for toll collection, daytime running lights, engine brake, ESP, lane keeping assistant, attention assistant, traffic sign assistant, Active Brake Assist. Frame length approx. 6350mm! Total length: 8500mm! Gusdpfx Anov Sdh Rogeh Available with crane mounting behind the house or at the rear on request! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! - .

Condition: used, mileage: 29,885 km, power: 290 kW (394.29 HP), first registration: 01/2020, fuel type: diesel, empty load weight: 7,000 kg, maximum load weight: 11,000 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, sleeper cab, air-suspended driver's seat, electric mirrors, heated mirrors, electric windows left and right, air conditioning, cruise control, navigation system, ABS (anti-lock braking system), ASR (traction control system), constant throttle, differential lock, leaf/air suspension, trailer coupling with air and electrical connections, aluminum fuel tank, underrun protection, roof hatch, green environmental badge. Wheelbase: 4800 mm Godpsxamyusfx Angouh Superstructure: with slidebed tow platform, wheel lift, 2x winches, radio remote control, 7.5t front axle, rear axle with 440 hypoid bevel gear, 13t, electronic braking system with ABS and ASR, disc brakes with partial protection at front and rear axles, condensate monitoring for compressed air system, electronic parking brake, stabilizer at front axle, aluminum front underrun guard, residual heat utilization, light sensor, comfort central locking, economy/power driving program, navigation system, multimedia cockpit, pre-installation for toll collection, daytime running lights, engine brake, ESP (Electronic Stability Program), lane departure warning system, attention assist, traffic sign assist, Active Brake Assist. Frame length approx. 6350 mm! Overall length: 8500 mm! Optionally available with a loading crane (12–20 mt) at a surcharge of EUR 20,000 to 40,000! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change and prior sale and errors excepted.

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm Gedey Sxvhspfx Angsuh - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center width: 1,600 mm, center height: 275 mm, spindle speed (max.): 3,500 rpm, controller model: Fagor 8055, power: 15.5 kW (21.07 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height over bed: 275 mm Swing over bed: 550 mm Swing over carriage: 310 mm Distance between centers: 1,600 mm Bed width: 420 mm Spindle bore: 82 mm Spindle speed: 80 – 3,500 rpm Maximum workpiece weight: 2,000 kg Swing over removable bed: 790 mm MACHINE DETAILS Control system: Fagor 8055 Power: 15.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,150 x 220 mm Net weight: 5,000 kg EQUIPMENT Fixed steady rest Removable bed Three-jaw chuck Godpjzk D Absfx Angsuh Travelling steady rest

Condition: used, mileage: 163,075 km, power: 162 kW (220.26 HP), first registration: 01/1998, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro2, loading space volume: 6 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, all wheel drive, crane, parking heater, * ABS * Analog tachograph * Mirror heating * Roof hatch * Rear window * Driver comfort seat * Seat heating * Front axle differential lock * Rear axle differential lock * Transfer case * Off-road reduction gear * Air dryer * Trailer coupling * 2-line air connection * Duomatic air connection * Ball-type coupling * Auxiliary heater * Front axle engageable * Exhaust behind cab * Electrically adjustable mirrors * 6-speed * Suspension: leaf springs * Payload: 1840 * Continuous brake: engine brake ----Special body: Crane: Atlas AK 60.1, folding, radio remote control + ground control, 1 hydraulic + 3 manual extensions (working height approx. 12.3 m). Load chart readings: lifts 3.1t @ 1.9m, 1.76t @ 3.5m, 1.22t @ 4.9m, 0.93t @ 6.4m, 0.60t @ 7.9m, 0.40t @ 9.3m. ----Body: Flatbed platform, reinforced front wall, hardwood floor, lashing rings, extendable center and rear stanchions. ----Rotzler front winch type Treibmatic TR 030, remote cable control, pulling force 50 kN, 190 bar, rope diameter 13 mm, rope length 60 m, max. rope speed 30 m/min. Gjdpfxeylra Ss Angeuh Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION GIVEN WITHOUT WARRANTY, INCL. EQUIPMENT & ACCESSORIES. All contracts, invoices, proforma invoices, orders, and sales negotiations are based on our general terms and conditions (see legal notice/imprint).

Condition: used, machine/vehicle number: 320102165, Year of construction: 1986, fuel type: diesel, weight max. in kg:7000 kg stroke:5200 mm fork length:1840 mm height over floor:3350 mm Guodpfx Aecxxx Iongeh width of fork carrier plate:2000 mm weight of the machine ca.:9,7 t dimensions of the machine ca.:9,50 x 2,00 x 3,35 m :3,62 x 2,00 x 3,35 m very robust design with 3 speed stages, automatic lights, windscreen wipers, enclosed, heated cab, sliding side-windows, 2 quick-attach sockets for additional equipment, UVV until 02/2005

Condition: ready for operation (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: automatic, fuel type: diesel, empty load weight: 11,910 kg, Year of construction: 2020, operating hours: 2,761 h, machine/vehicle number: MAN00000K01048416, Equipment: AdBlue, CE marking, TECHNICAL DETAILS Tyre size: 375/85-24 Axle configuration: 4x4 Load capacity: 4,000 kg Lift height: 17.55 m Reach: 13.08 m MACHINE DETAILS Power: 55 kW Transmission type: Automatic Fuel type: Diesel Engine brand: TD 3.6 L4 Emission level: Stage V / Tier IV final Godpfxox Tq Ncs Angjuh Drive: Wheel Chassis design: Rigid Dimensions & Weight Transport dimensions (L x W x H): 6.27 m x 2.36 m x 2.45 m Unladen weight: 11,910 kg Operating hours: 2,761 h EQUIPMENT All-wheel drive CE marking AdBlue system Forks Quick couplers Stabiliser Additional hydraulics

Condition: used, Year of construction: 2026, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm Gjdezqr Ekspfx Angjuh MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder PLEASE NOTE! This machine is a returned item with damaged packaging. NO WARRANTY!

Condition: ready for operation (used), Cutting capacity, circular: 340 mm Cutting capacity, flat: 340 x 290 mm Cutting capacity, square: 325 x 325 mm Saw blade dimensions: 600 x 52 x 2.5 mm Guodpeznvnksfx Angoh Drive motor: 380 V, 6 kW Space requirement: 2100 x 2100 x 1470 mm Weight, approx.: 1840 kg

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 17,550 mm, Year of construction: 2026, operating hours: 5 h, Equipment: air conditioning, Technical information Number of cylinders: 4 Engine capacity: 3.621 cc Engine type: Deutz TD 3.6 L4 Empty weight: 11.630 kg Dimensions (LxBxH): 615 x 236 x 245 cm Functional Lifting capacity: 4.000 kg Maximum reach: 1.308 cm Quick coupler system: Yes CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Electric windows - Mudguards - Pallet forks - Quick change - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Frankrijk Gusdpfxjz Aakfj Angjh New Manitou MT 1840 75D with Air Conditioning

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Gsdpfx Anjycg Ryjgsuh Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number Gedpfsyl Iwtex Angouh 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Suitable for GMP environments Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Gedpfx Asyhd Dbengjuh Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 3 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,500 mm, power: 74 kW (100.61 HP), fork length: 1,200 mm, empty load weight: 12,500 kg, total length: 6,270 mm, drive type: Diesel, construction width: 2,420 mm, Telescopic forklift, rigid frame Load center: 500 Mast type: Telescopic Transmission: Torque converter Speed class: 35 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 24 Rear tire condition: 80 - 100% Gusdezrqqnopfx Angjh 3. Valve, heater, fully enclosed cabin, air conditioning, CE certificate, exterior mirrors, rotating beacon

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, construction table -Width: 1840 mm -Length: 5200 mm -Height: 850 mm -Sheet thickness: 28 mm -with supporting ribs Guodpfx Anob Elz Rogjh -Weight: 2400 kg

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 385 kg, total width: 960 mm, total length: 950 mm, input frequency: 50 Hz, electrical fuse: 16 A, Kemper F 70 S Lifting Mixer Dough Mixer Kemper Model: F 70 S 2 speeds Lifting mixer with flour dust hood Mobile machine Connection: 400V, 16A CEE plug Guedpfoy Srr Nex Angoh Dimensions: 960 x 950 x 900/1840 mm (W x D x H) Used machine

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 9,955 h, load capacity: 4,000 kg, lifting height: 18,000 mm, fuel type: diesel, mast type: telescopic, drive type: Diesel, Rotating telescopic handler Mast type: Telescopic Condition: As new Technical condition: very good Gsdpfxez Amr Ae Angjuh Description: Perkins engine. Rotating man basket + forks. Machine fully serviced and ready for work. Heater, fully enclosed cab.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 385 kg, total width: 960 mm, total length: 950 mm, input frequency: 50 Hz, electrical fuse: 16 A, Hub kneader Kemper F 75 SL Dough kneader with 2 speeds Flour dust cover Gusdpfjy Srtaex Angjh Stainless steel bowl and kneading arm Mobile machine DGUV V3 safety tested exclusively by us Connection: 400V, 16A CEE plug Dimensions: 960 x 950 x 900/1840 mm (W x D x H) Used machine

Condition: used, CAN-BUS Digital Data Recorder Gjdpfswm Ir Usx Angjuh See also my other offers from the automotive measurement technology sector. 2 units available As shown, without data storage device. BUSDAQ-VW-ET is also known as BUSDAQ-X-ET. CAN nodes: 2-6, 8 on request (extendable with up to 3 MBUS cards; CAN, LIN, ARINC). Baud rate: Max. 1 Mbps. Digital In/Out: 4 (D-sub15). LAN Interface: TCP/IP. External Modem: DSUB9. Storage: Compact Flash. Sync. Plug: BNC. CTRL Plug: DSUB9. Surge protection: 60 V. Supply power consumption: 10-50 VDC, 200 mW.

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 140 l, lifting height: 17,550 mm, Year of construction: 2023, operating hours: 2,630 h, Equipment: air conditioning, Empty weight: 11.700 kg Carrying capacity: 4.000 kg Guodpozkaxlefx Angoh GVW: 15.700 kg Dimensions (LxBxH): 627 x 242 x 250 cm Engine type: Deutz Deutz 854E-E34TA

Condition: ready for operation (used), Rexroth 2AD101D-B05OB2-BD03-B2N1 3-Phase Induction Motor, part number: R911273305, serial number: 2AD101-01840. Motor has been overhauled!, professionally and completely refurbished and tested with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request the costs for packaging and shipping separately! For this item, the agreed sales discounts do not apply. Please request the price separately! Godpfxsi D Ncke Angsuh

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h Gujdpfx Ajzukp Aongjh -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 5645, input voltage: 380 V, type of input current: three-phase, total width: 1,600 mm, total length: 2,000 mm, total height: 1,700 mm, overall weight: 2,150 kg, power: 8.2 kW (11.15 HP), input frequency: 50 Hz, input current: 15 A, table length: 600 mm, table width: 200 mm, number of digital displays: 1, Hydraulic surface grinder with electromagnet and digital readout. Guodjzt Ibyspfx Angsh

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,800 kg, power: 22 kW (29.91 HP), Technical data: Power: 22 kW Blades: 29 pieces Dimensions: 1800 × 1840 × 1000 mm Weight: approx. 1,800 kg Gjdpfxoxnznvo Angouh Condition: New and unused On pallet, immediately available for delivery or collection Location: 86554 Pöttmes