Used Mark Msa 15 for sale (20,634)

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Characteristics: Power 120 kW Lhjdpfx Asvyrxgebzjl Voltage 500 V Air flow rate 51 m3/min Pressure 40 – 150 kPa

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Characteristics: Lhsdpfx Abevyrxyjzsl Power 120 kW Voltage 500 V Air flow rate 51 m3/min Pressure 40 – 150 kPa

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, SARMAX APACHE 15 IMPREGNATING MACHINE WITH 8 BRUSHES. In good condition, fully functional. Height and width are motorized. Lsdpfx Aew E Evzobzohl

Condition: as good as new (ex-display), Year of construction: 2024, pressure (max.): 13 bar, CSA 15/13 SCREW COMPRESSOR, NO. 1,000 MOUNTED ON 500-LITER TANK WITH DRYER AND FILTERS 11 kW, 15 HP MAXIMUM PRESSURE: 13 BAR 400V/50Hz/3-PHASE FLOW RATE: 1147 L/min NOISE LEVEL: 67 dB(A) Lhedpfx Abez Duc Nozsl DIMENSIONS: 1540x665x1535 mm, WEIGHT: 450 kg Attached: User and maintenance manual CE declaration of conformity

Condition: used, Year of construction: 2025, machine/vehicle number: 202530090, total width: 800 mm, total height: 1,200 mm, total length: 800 mm, overall weight: 85 kg, scan area length: 150 mm, scan area width: 150 mm, laser wavelength: 1,064 nm, Laser system for marking, housing with manual lift-up door, focus laser for determining the focus position, Z-axis (software-controlled), rotation unit (360°), mobile extraction unit (Vaupel LAB-1f, 210W, serial no.: CP24-52-1-0209, year of manufacture: 2024). The condition is evident from the attached expert report. Ledpfxjzvm Tgs Abzohl

Year of construction: 2013, condition: excellent (used), Complete line for aerating fat cream. Includes storage tank. Scraped heat exchanger, Mondotherm - Terlet D100. Mondomix aerator, VA-15L. Coolers. Ledpfx Aszpg Scjbzohl Pumps. Complete CIP system.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVING CYLINDER. Capacity: 150 tons. Dual automatic speed with rapid traverse. Special electrical panel with fast/slow switch for one-hand operation. Moving cylinder with 816 mm traverse stroke. Internal daylight from shoulder to shoulder: 1500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVING PISTON – NEW CONDITION “CE” MARKED. -DUAL AUTOMATIC SPEED WITH RAPID TRAVERSE. -COMPLETE WITH A SPECIAL ELECTRICAL PANEL FOR FAST/SLOW SWITCH FOR ONE-HAND OPERATION. Lsdpfx Abolruhdjzohl -TECHNICAL DATA SHEET ATTACHED. -Applied force: 150 tons -Cylinder stroke: 300 mm -Internal daylight: 1504 mm -Approach speed (rapid traverse): 1450 mm/minute -Working speed (slow): 105 mm/minute -Cylinder ram stroke: 300 mm -Cylinder ram diameter: 110 mm -Stem diameter: M30 -Tank capacity: 50 liters -Max. pressure: 350 bar -Voltage: 400 V, Frequency: 50-60 Hz -Power: 3 kW motor -Max. current consumption: 7.3 A -Weight: 1500 kg GALTECH distributors. • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar), and one with adjustable pressure controlled by a handwheel to set the required power. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard pressure gauge to display the applied force. • INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: excellent (used), *5-HEAD DRILLING MACHINE CINCINNATI MILACRON PM15* Ref: MILACRON-PM15-5T-0182 - Brand: CINCINNATI MILACRON (Chambost) - Type: PM 15 - 5 heads on a common base - Year: January 1982 - No. 74612 - Power Supply: 380V Three-phase - Capacity: Drilling 15mm / Tapping M10 approx. per head - Table: Long grooved table ∼2.5m with stops Ledoz Ax E Iepfx Abzshl - Equipment: 5 independent PM15 column drills, manual / automatic feed - Length of grooved table: 2100 mm x 400 mm - Condition: Complete set, functional, original blue paint - Weight: ∼800 kg for the complete machine Ideal machine for a small-batch workshop, multiple drilling, and finishing before assembly.

Condition: refurbished (used), Year of construction: 2014, turning diameter over cross slide: 480 mm, turning length: 680 mm, turning diameter: 410 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, spindle motor power: 22 W, Brand: Hyundai-Wia Model: L-300/MSA Category: CNC Lathes Year of manufacture: 2014 CNC Control: FANUC Series 32i-Model A Machine weight: 7,000 kg Lodpfxsx Elzkj Abzjhl Machine dimensions: Length: 4,780 mm Width: 2,055 mm Height: 2,000 mm Capacity: Maximum swing over bed: 750 mm Maximum swing over carriage: 480 mm Maximum turning diameter: 410 mm Maximum turning length: 680 mm Bar capacity (spindle/sub-spindle): 76 mm / 65 mm Travel: X-axis: 290 mm Z-axis: 750 mm ZB-axis: 700 mm C-axis: 360° (minimum indexing angle: 0.001°) Spindle: Spindle diameter: 254 mm Spindle speed: 3,500 rpm Spindle nose: ASA A2-8 Spindle motor power (max./cont.): 22/18.5 kW Minimum C-axis control angle: 0.001° Sub-spindle: Sub-spindle diameter: 210 mm Sub-spindle speed: 4,000 rpm Spindle nose: ASA A2-6 Sub-spindle motor power (max./cont.): 11/7.5 kW Minimum C-axis control angle: 0.001° Turret: Turret stations (live tool capable): 12 Live tool speed: 4,000 rpm Live tool motor power (max./cont.): 5.5/3.7 kW Turning/boring tool dimensions: 25x25 mm or 50 mm Rapid traverse: X / Z axis: 20,000 mm/min Z axis: 24,000 mm/min Accessories and additional features: Chip conveyor Coolant tank with 20 bar high-pressure wash pump Automatic tool setter with push button and M code (down/up) Various live and static tool holders included Comprehensive documentation: manuals, electrical diagrams, CE declaration

Year of construction: 2022, condition: like new (used), JustLaser JustMark 4.2 Fiber Laser (Year of Manufacture 2022) – Like New – Industrial Quality For sale is a high-quality JustLaser JustMark 4.2 fiber laser from 2022 in top condition (like new). The machine has seen little use and operates flawlessly. Ideal for professional applications in metal engraving, series production, or customization. 🔧 Technical Details: Ljdpfxoyu Szuj Abzshl Model: JustMark 4.2 Year of manufacture: 2022 Laser type: Fiber laser Condition: Very good / like new Areas of application: Metal engraving, marking, series production ⚙️ Benefits: Precise and fast engraving, even in series production Low maintenance and long-lasting Professional industrial quality Easy operation and reliable performance Original price: 25,000 EUR net

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Model: FlyMarker XL Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Ledjyhnu Dopfx Abzehl Serial number marking Technical and production markings Marking steel, aluminum, and other metals Included: FlyMarker XL marker Power supply Cables Exactly what is shown in the photos Shipping or personal pickup available. If you have any questions, please contact me.

Year of construction: 2004, condition: excellent (used), SCREW COMPRESSOR, MSC37 MODEL, 37kW, WITH FREQUENCY CONVERTER!!! MARK MSC37 IVR screw compressor (ATLAS COPCO screw stage) – machine with frequency converter. Technical data: Capacity: 6.08 m3/min; Engine power: 37 kW; Lhsdpsh Ngc Eefx Abzol Pressure: 8 bar; Operating hours: 12942h!!! Year of manufacture: 2004; Compressor in fully working condition. Net price: 18,500 PLN Gross price: 22,755 PLN

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,530 h, load capacity: 1,500 kg, lifting height: 3,750 mm, fuel type: electric, mast type: telescopic, construction height: 2,300 mm, battery capacity: 805 Ah, battery voltage: 24 V, fork length: 1,100 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,097 kg, total height: 2,300 mm, total length: 1,850 mm, total width: 1,050 mm, fuel: electricity, Equipment: sideshift, LINDE E 15 Z-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.750 mm Closed height: 2.300 mm Mast: Standard (2W375) Lhjdpoz Aqpxjfx Abzol Fork length: 1.100 mm Fork carriage: 2A Drive: Elektro 24V Battery: 24 V 805 Ah v. 2022 Charger: Einphasig 24 V 50 A not tested Tyres: Superelastik SE 18 x 7 - 8 (60%) / 15 x 4,5 - 8 (0%) Service weight: 3.097 kg Length: 1.850 mm Width: 1.050 mm Year of manufacture: 2006 Operating hours: 3.530 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309228 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: as good as new (ex-display), Year of construction: 2026, Exhibition Piece: FirstAir Variable 15 kW Screw Compressor FASM 15 Type: FASM 15 Year of Manufacture: 2026 Operating Hours: 0 hrs Technical Specifications Max. Operating Pressure: 13 bar(g) Free Air Delivery (FAD): at 5 bar: 1.14 to 2.86 m³/min at 7 bar: 1.02 to 2.55 m³/min at 8 bar: 0.96 to 2.40 m³/min at 10 bar: 0.82 to 2.05 m³/min at 12 bar: 0.74 to 1.85 m³/min at 13 bar: 0.69 to 1.72 m³/min Installed Motor Power: 15 kW Operating Voltage: 380V/400V/415V ~ 50 Hz Sound Pressure Level (EN ISO 2151): 71 dB(A) Lhjdpsz D Etlsfx Abzol Compressed Air Connection: G 3/4" Dimensions (L x W x H): 680 mm x 680 mm x 1240 mm Weight: 270 kg Sales Information: Convenient leasing options via our house bank are available for new machines. Visit our showroom / retail store. We always keep a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly; SIEMENS PLC; WEINVIEW touch screen; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 15 cycles/min; bag sizes: L(60-600)x W(200-585)mm (double film pulling L = 1100mm), gusseted stand-up pouches: L(60-600)xW(140-500)xD(100-250)mm (double film pulling L = 1100mm); suitable film width: 420-1200mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 8.2kW; air pressure: 0.7MPa; compressed air consumption: 0.25-0.50m³/min; weight: 1030kg. Lhsdsv Nnfhjpfx Abzol Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt. Lhjdpstu H Avjfx Abzol

Condition: used, machine/vehicle number: 008742, X axis working area: 3200 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Number of controlled axes: 3 axes Lhodpjz D Dgdofx Abzel Total number of drilling spindles: 25 Total number of tool changer positions: 10

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer the Stephan Microcut MC15 cutter, designed for precise grinding, mixing, and emulsifying food products in food processing plants. It is a compact, industrial machine manufactured by Stephan Machinery GmbH, a company renowned for its solutions for producing fillings, emulsions, pastes, sauces, and other products requiring a uniform texture. The MC15 model is ideal wherever consistent processing results, high-quality grinding, and stable operation under production conditions are essential. With a rotational speed of 2945 rpm and a power output of 11 kW, the machine ensures intensive and effective processing of raw materials, resulting in a uniform consistency of the final product. It is an excellent solution for applications requiring precise cutting and dispersion of ingredients. The Stephan Microcut cutter is a good choice for companies looking for a used, reliable machine for precise product processing. Technical specifications: Manufacturer: Stephan Machinery GmbH Model: Microcut MC15 Year: 2020 Power supply: 400 V Power: 11 kW Rotational speed: 2945 rpm Current: 22 A Motor type: HEFIE3 132L/2-2200 Advantages of the Stephan MC15 cutter precise grinding and emulsification of the product, Lsdey Eplwepfx Abzshl high operating speed, compact, industrial design, German build quality, suitable for the production of fillings, emulsions, pastes, and sauces, stable operation in an industrial environment. Stephan Microcut MC15 is a practical solution for companies that want to improve product processing quality and work with a proven machine from a reputable manufacturer.

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg Lhjdpfjzq Hwnex Abzjl

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm Lhsdpezulwzefx Abzel - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm Lhjdpfoxiu Dtox Abzel max. cutting width 600 mm max. cutting height 170 mm motor 11 kW

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB2600ID-15/1.85 IRC5 (RW6), load capacity: 15 kg, arm reach: 1,850 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB2600ID-15/1.85 Controller: IRC5 (RW6) Payload: 15 kg Reach: 1850 mm Featuring a unique combination of high payload capacity, large working range, and Integrated Dressing (ID), which routes all cables and hoses inside the robot’s upper arm and wrist. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Lhsdjwr Ei Ujpfx Abzol Est. 2002. We ship worldwide.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 6,210 h, load capacity: 1,500 kg, lifting height: 3,140 mm, free lift: 1,470 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, battery capacity: 920 Ah, battery voltage: 24 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,054 kg, total height: 2,120 mm, total length: 1,900 mm, total width: 1,080 mm, fuel: electricity, Equipment: sideshift, LINDE E 15 - 01 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.140 mm Closed height: 2.120 mm Free lift: 1.470 mm Mast: Duplex (2F314) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 24V Battery: 24 V 920 Ah v. 2015 Charger: ohne / without Tyres: Superelastik SE 18 x 7 - 8 (90%) / 15 x 4,5 - 8 (90%) Service weight: 3.054 kg Length: 1.900 mm Width: 1.080 mm Year of manufacture: 2010 Operating hours: 6.210 h Condition: working condition EQUIPMENT 3rd valve, Pulse control Lsdpfx Ajz Aqrgobzohl ATTACHMENTS Sideshift Internal no.: 1309250 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2020, condition: excellent (used), 2020 Coherent EasyJewel 5 Premium Desktop Class 1 Fibre Laser Marking and Engraving System With Rotary Axis The Coherent EasyJewel 5 Is A Premium Desktop Class 1 Fibre Laser Marking & Engraving System Designed Primarily For Jewellery, Watches, Medical Devices, Precision Engineering & Small Industrial Components. It Is Capable Of High-Resolution Engraving, Deep Engraving, Annealing, 2D Code Marking, Optional 3D Engraving Using Coherent's Laser Suite Software. Chamber Dimension W300 x D200 x H120mm. Marking Field Options Standard Lenses Include Fields Like 120 x 120mm, 180 x 180mm, or 240 x 240mm. Pulse Width 4 to 200ns. Pilot Lase: 660nm (Visible Red Guide). 'Z' Axis Travel 120mm. Voltage 230V. S/No. 40475422 (2020). Ljdpfxszvpy Nj Abzohl With BOFA Extraction & Filtration Unit, Laptop With Software, EasyJewel Special Ring Holders, EasyJewel Chuck For Bangle/Bracelet Marking & EasyJewel Chuck For Irregular Shaped Rings. Overall Dimensions L770 x W540 x H750mm. Weight Approx. 87kg.

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. Lhedpfx Abstu H Hcjzjl We have two of them. We would also bring the device to us from Frankfurt.