Used Low Temperature Boiler for sale (15,273)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener Hsdpfx Afszzhfue Sju * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: used, axle configuration: 3 axles, first registration: 06/2002, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75r17,5, wheelbase: 1,350 mm, Year of construction: 2002, Drivetrain Drive: Wheel Axle configuration Tyre size: 235/75r17,5 Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Rear axle 3: Double wheels Weights Empty weight: 8.880 kg Carrying capacity: 48.120 kg GVW: 57.000 kg Hjdpfx Afoy E N Smj Ssu Functional Make of bodywork: ROBUSTE-KAISER Height of cargo floor: 88 cm

Condition: new, Stock of ceramic products from bankruptcy of importer. Originally about 3 full containers. Currently, at least 2 containers/truckload are needed. Hedpsxa Einofx Af Ssu

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Hjdpshgfnbefx Af Sou Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock Hodpfxshgg Rrj Af Sou 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2017, Panasonic MDF-C2156VAN Ultra-Low Temperature Freezer External dimensions (W x D x H): 1730 x 765 x 1010 mm Internal dimensions (W x D x H): 760 x 495 x 615 mm Volume: 231 liters Net weight (approx.): 318 kg Cooling performance: -150°C Temperature setting range: -125 to -152°C Temperature control range: -130 to -150°C You are welcome to arrange an inspection. We can also organize affordable shipping for you! Hedpfoyvud Ajx Af Seu The purchase price includes VAT. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and view our other offers. The stated company names and trademarks are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1999, 1999 | Robust Kaiser S5303 | Used Low Bed Semi-trailer Hsdpszz Aklefx Af Seu 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 15 inspection points 10 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Thanks to its robust chassis and the ability to widen the entire width (to a platform of 3.20 m), this heavy-duty trailer remains a powerful vehicle. The loading floor and ramps show - due to active use - strong signs of wear and would benefit from refurbishment, yet the basic frame provides a solid base. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41098 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, axle configuration: 3 axles, first registration: 12/2012, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 11,250 mm, color: black, Year of construction: 2012, 400 cm extendable. 3 x steering axle. Remote steering. Loading bed: 565 cm + 400 cm. Loading height: 45 cm. = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Hsdpfx Aswypatef Sju Suspension: Air suspension Rear axle 1: Dual tires; Steered; Tire tread depth left inner: 30%; Tire tread depth left outer: 50%; Tire tread depth right inner: 30%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 3: Dual tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 40%; Tire tread depth right inner: 30%; Tire tread depth right outer: 40% Weights Unladen weight: 13,320 kg Payload: 34,680 kg GVW: 48,000 kg Identification Model number: MPG 3 / EXTENDABLE / LOW BED / 3 = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Hodpex R A A Nsfx Af Ssu Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Condition: used, mileage: 724,807 km, first registration: 08/2016, axle configuration: 4x2, gearing type: automatic, suspension: air, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, traction control, = Additional options and accessories = - Air suspension = Notes = DB Actros 1845 LS MEGA Lowliner tractor unit - EURO 6 Hedpfx Aswmpbqsf Sju - Intarder - Automatic climate control - Stationary air conditioning - Auxiliary heater - Automatic transmission - ASR / switchable - Differential lock - Hill-start assist - Adaptive cruise control - Lane assist - Emergency brake assist - Cab spoiler - Air horns - 1 bed - Multifunction steering wheel - 1 tank - Tyres front axle: 315/60 R 22.5 rear axle: 295/60 R 22.5 - One owner! - German vehicle! Errors and intermediate sale excepted! = Further information = Number of owners: 1 Damages: none = Further information = Suspension: air suspension

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, total length: 11,000 mm, total width: 2,550 mm, suspension: air, tire size: 265/70/19.5, color: blue, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 265/70/19.5; twin tyres; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Tyre size: 265/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Rear axle 3: Tyre size: 165/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Weights Hsdpfewifrdox Af Ssu Unladen weight: 12,000 kg Payload: 36,000 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 95 cm Condition Technical condition: very good Visual condition: very good EMTECH 3-AXLE LOWBED TRAILER SAF AXLES TRIDEC STEERING SYSTEM AIR-SUSPENDED, STEERED 1 AXLE IS LIFT AXLE 10,000 KG PER AXLE TECHNICALLY PERMISSIBLE GROSS WEIGHT 48,000 KG TYRE SIZE 265/70 R19.5 LOADING PLATFORM LENGTH 700 CM EXTENDABLE 515 CM LOADING PLATFORM WIDTH 255 CM LOADING PLATFORM HEIGHT +/- 95 CM LASHING EYES AND STAKE POCKETS

Condition: used, maximum load weight: 35,040 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 04/2027, loading space length: 16,270 mm, loading space width: 2,550 mm, loading space height: 855 mm, total length: 16,560 mm, total width: 2,550 mm, total height: 855 mm, Year of construction: 2022, Equipment: ABS, 3-axle low-bed trailer GOLDHOFER Stepstar with TELESCOPIC EXTENSION First registration 04/2022, from first owner!! Saddle load up to max. 18,000 kg Permissible total weight (technical) 45,500 kg Length of gooseneck 3,700 mm Length of low-bed 9,300 mm + telescopic extension 3,340 mm = 12,640 mm Loading height 855 mm (-60/ +140 mm) Second loading height 895 mm (-100/+100 mm) Hedpfx Aszz Uncsf Sou Vehicle width 2,550 mm Excavator well length (L x W x H) 3,850 x 760 x 310 mm Wheelbase 2,250 and 1,410 mm 1-piece mechanical aluminum ramps with spring support, load capacity 24,000 kg, length 2,500 mm, width 450 mm Slider design for easy installation and removal of the ramps 1 pair of fixed wheel recesses in front of the first axle, 390 mm deep, incl. climbing strips in the slope 1 pair of fixed wheel recesses between the first and second axles, 390 mm deep, incl. climbing strips in the slope Aluminum wheel recess covers "Premium", full width 600 mm, extendable to 3,000 mm with 8,000 kg axle load Different wheel recess depths by using the wheel recess covers (depth approx. 390 and 260 mm) Angled vehicle rear end 8° over a length of 550 mm Downpipe outlet at the vehicle rear Frame finishing with corrosion-resistant zinc dust primer + cavity sealing BPW axles ECO Max Drum brakes 1st axle LIFT AXLE 3rd axle trailing steering KNORR trailer EBS with RSS driving stability control KNORR trailer information module Lighting completely LED 1 pair of additional reversing lights at the rear Load securing, gooseneck: 3 pairs of lashing rings 5,000 kg 2 pairs of side rail pockets Load securing, low-bed: 1 pair of lashing points 10,000 kg in the center of the loading area behind the gooseneck 1 pair of lashing points 10,000 kg in the center of the rear area 6 pairs of lashing points 10,000 kg in the outer frame 6 pairs of side rail pockets in the outer frame Condition 1A, very well maintained RENTING is the new BUYING; with us, it is also available immediately in a full-service rental agreement.

Condition: used, axle configuration: 3 axles, first registration: 02/2001, total length: 13,350 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2001, Total length: 1334 cm + 1950 cm. Loading bed length: 915 cm + 1950 cm. Loading height: 100 cm. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Rear axle 2: Twin tires; Steerable; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 3: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Weights Unladen weight: 15,650 kg Hjdpfeycf Htjx Af Sju Payload: 29,350 kg GVW: 45,000 kg Identification Model number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, empty load weight: 2,220 kg, maximum load weight: 6,980 kg, overall weight: 9,200 kg, axle configuration: 1 axle, first registration: 04/2015, suspension: air, tire size: 215/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 1 axle, BPW axles, ABS (anti-lock braking system), low coupling, twin tires. Hedpfxszzbgls Af Seu Superstructure: Lifting platform, platform at the rear can be extended. Only sold together with the truck MB Atego 1024 L 4x2 -89987- for 27,900 euros net. Total price: 42,800 euros net. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axle Radio-remote steering Hydraulic ramp Camera = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 11,344 kg Hodpfxszcuxrj Af Sju Payload: 54,656 kg GVWR: 66,000 kg Maintenance APK (Technical Main Inspection): valid until 02/2027 Financial information Price: On request Identification Model number: N/A F-S44 / STEERING AXLE - LIFT = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, axle configuration: > 3 axles, first registration: 04/2007, total length: 13,400 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 9,800 mm, color: white, Year of construction: 2007, Equipment: ABS, Safe axle. 2 x trailing arm steering. Hodpfx Afsy N Aw Rj Seu Expandable. Lift roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 2: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 3: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 4: Double tires; tire tread depth left inner: 40%; tire tread depth left outer: 40%; tire tread depth right inner: 40%; tire tread depth right outer: 40% Weights Unladen weight: 9,940 kg Payload: 37,660 kg GVW: 47,600 kg Identification Model number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT) / Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, maximum load weight: 8,680 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2016, next inspection (TÜV): 09/2028, Year of construction: 2016, Internal vehicle number: G400182 Available immediately at our location in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. Hedpfoz Amvnex Af Ssu GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axles Radio remote steering Hydraulic ramp Camera = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Hsdpszp Dryjfx Af Sou Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Rear axle 3: Dual tires; Steered; Tire tread depth, left inner: 40%; Tire tread depth, left outer: 40%; Tire tread depth, right inner: 40%; Tire tread depth, right outer: 40% Rear axle 4: Dual tires; Steered; Tire tread depth, left inner: 60%; Tire tread depth, left outer: 60%; Tire tread depth, right inner: 60%; Tire tread depth, right outer: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVW: 66,000 kg Maintenance APK (Technical Inspection): valid until 02/2027 Financial information Price: On request Identification Model number: max trailer N/A F-S44 / STEERING = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 2010, Year of manufacture: 2010 Hodezw Ei Ajpfx Af Seu Production country: DE Please contact Theo Lelie , , ) for more information

Condition: excellent (used), first registration: 03/2017, loading space length: 94,100 mm, loading space width: 2,550 mm, color: green, Year of construction: 2017, Unladen weight: 4,100 kg Payload: 14,900 kg Gross vehicle weight (GVW): 19,000 kg Loading platform height: 90 cm Technical condition: very good Visual condition: very good ACKERMANN 1-AXLE SEMI SPECIAL FOR CRANE TRUCK Hodjyffpmspfx Af Seu 1 AXLE, AIR SUSPENSION BPW AXLE CHASSIS FULLY HOT-DIP GALVANIZED ALUMINUM SIDE WALLS LOWBED HEIGHT 90 CM NECK LENGTH: 370 CM LOADING PLATFORM LENGTH: 590 CM TOTAL SEMI LENGTH: 940 CM TRAILER IS IN EXCELLENT CONDITION

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 03/2017, loading space length: 18,500 mm, loading space width: 2,530 mm, loading space height: 2,480 mm, total length: 18,500 mm, total width: 2,530 mm, total height: 2,480 mm, suspension: air, tire size: 245/70-R17.5, Year of construction: 2017, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Spare wheel Hedpfxozcnpko Af Sou - Drum brakes - Central lubrication system = Notes = Beautiful BROSHUIS 3ABSD-48/1 3-axle low-loader from 2017 with ABS/EBS, permissible total weight: 59,000 kg, vertical load with coupling: 23,000 kg, hydraulic steering on the 2nd and 3rd axles, lift axle on the 1st axle, hydraulic ramps (2-part, length: 310 + 190 cm, width: 91 cm, slope angle 8°, width adjustment), hydraulic lift platform, hydraulic support legs at the rear, electric winch (8,165 kg with 27.4 m steel cable and hook), loading platform height: 92.5 cm, 2 pairs of bolster pocket rows, widening supports, various lashing points and bolster pockets, BPW Eco Plus axles with drum brakes and twin tires at the rear with 245/70-R17.5 tires (tread depth left: 8/7, 5/9, 9/10 mm; tread depth right: 4/9 mm, 9/9, 9/9 mm), 1x spare wheel, unladen weight: 16,049 kg, permissible total weight: 59,000 kg, Belgian registration. = Further Information = Axle configuration Tire size: 245/70-R17.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 12,000 kg; Tire tread depth left inner: 45%; Tire tread depth left outer: 50%; Tire tread depth right inner: 55%; Tire tread depth right outer: 25% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 55%; Tire tread depth left outer: 30%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55% Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 55%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55% Weights Unladen weight: 16,049 kg Payload: 42,951 kg GVWR: 59,000 kg Functional Body brand: Brosuis 3ABSD-48/1 Loading platform height: 91 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 03/2015, loading space length: 19,800 mm, loading space width: 2,750 mm, loading space height: 3,800 mm, total length: 19,800 mm, total width: 2,750 mm, total height: 3,800 mm, suspension: air, tire size: 245/70-R17.5, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting axle - Air suspension - Drum brakes = Notes = BROSHUIS E-2190/27, year of manufacture 2015, 3-axle low-bed trailer in very good condition, extendable by 6.40 m, 275 cm wide (extendable to 320 cm), hydraulic ramps (300 x 80 cm) + 2 small loading ramps for the gooseneck, ABS/EBS, SAF axles with drum brakes, 1st axle = lifting axle, 3rd axle = steering axle (trailing axle), loading area height: 90 cm, widening elements + lashing eyes + stake pockets + swivel locking eyes, 4 width markers + all-round lights, hardwood floor, twin tires at the rear with 245/70-R17.5 tires (tread depth left: 11/11, 10/11 mm; tread depth right: 9/9, 8/7, 11/9 mm), unladen weight: 12,130 kg, permissible total weight: 52,800 kg, Belgian registration with a valid technical inspection. Inspection valid until 04.10.2027. = Further Information = Axle configuration Tire size: 245/70-R17.5 Axle brand: SAF DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Lifting axle; Max. axle load: 11,600 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55% Hodpfjzz Scdsx Af Sou Rear axle 2: Twin tires; Max. axle load: 11,600 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 50%; Tire tread depth right outer: 55% Rear axle 3: Twin tires; Max. axle load: 11,600 kg; Steering; Tire tread depth left inner: 70%; Tire tread depth left outer: 60%; Tire tread depth right inner: 55%; Tire tread depth right outer: 70% Weights Unladen weight: 12,130 kg Payload: 40,670 kg GVW: 52,800 kg Functional Body brand: Brosuis E-2190/27 Loading area height: 90 cm Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): Valid until 10/2027 Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, operating pressure: 180 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK MH 7P - 180/1260 FA HOT WATER WASHER NEW HEATING BOILER Manufactured in 2017 The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. Hodpeymmgcefx Af Sju TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3 phase Flow rate [l/h]: 1170 Max pumping capacity [l/h]: 1260 Working pressure [bar]: 180 Maximum pressure [bar]: 250 Max. Heating temperature [°C]: 90-150 Connection power [kW]: 7.6 Detergent tank [l]: 10+10 Hose length [m]: 10 Weight [kg]: 195 EQUIPMENT: NEW HEATING BOILER NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, empty load weight: 3,290 kg, maximum load weight: 8,610 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2019, next inspection (TÜV): 05/2027, loading space length: 7,100 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminum fender, adjustable drawbar. Hodpjy Ui Itjfx Af Ssu Superstructure: Tandem low-bed trailer with mechanical ramps and wooden floor. Loading height approx. 920mm, 2 x Gigant axles, drum brakes, frame and ramps galvanized! Currently derated to 10,000 kg (payload 7,610 kg), 40 mm drawbar eye. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2007, 2007 | Faymonville STBZ3 | Used Low Bed Semi-trailer 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Hjdpfeznl Tvox Af Seu 💰 Buy Now for EUR 32500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 12 inspection points 12 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Tiltable bed trailer, with some body work to do. Has its own hyd-agregat. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40866 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.