Used Leveling Device for sale (15,685)

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 85 h, load capacity: 2,500 kg, fuel type: electric, fork length: 2,350 mm, drive type: Elektro, Low level order picker Load center: 600 Condition: Ready for operation and fully functional Ljdpeyyru Hofx Ancsaa Technical condition: very good Front tires type: Polyurethane Rear tires type: Polyurethane Battery voltage: 24V Battery year: 2022 Description: Initial lift,

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 330 h, lifting height: 4,880 mm, fuel type: electric, mast type: triplex, empty load weight: 1,530 kg, drive type: Elektro, construction width: 860 mm, High lift order picker Mast type: Triplex Technical condition: New Front tires type: Polyurethane Front tires size: 230x75 Rear tires Type: Polyurethane Ledpfx Answqtvmsceaa Rear tires size: 204x76 Battery Volt: 24V Battery condition: 80 - 100% Image may serve as symbolic representation

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 475 h, load capacity: 336 kg, lifting height: 3,000 mm, fuel type: electric, drive type: Elektro, High-lift order picker Mast type: None Ljdpfovg Tlbox Ancsaa Technical condition: good Battery condition: 80 - 100% CE Certificate,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 200 h, load capacity: 227 kg, lifting height: 4,880 mm, fuel type: electric, mast type: triplex, empty load weight: 1,705 kg, drive type: Elektro, construction width: 860 mm, High-lift order picker Mast type: Triplex Technical condition: New Front tyre type: Polyurethane Lsdpfjvghu Rex Ancsaa Front tyre size: 230x75 Rear tyre type: Polyurethane Rear tyre size: 204x76 Battery voltage: 24V Battery condition: 80 - 100% CE certificate, Image may be for illustrative purposes only.

Condition: excellent (used), Optimatic rsmo 090 -tensioning, leveling and back correction for bandsaws. Fully functional. Year of manufacturing 2011 Vollmer Depomatic-System ALIGATOR . Perfect working condition, 1997 , equipped with induction heater for annealing welded teeth Laedpfoyym S Tjx Ancea

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,316 h, load capacity: 2,000 kg, fuel type: electric, fork length: 2,400 mm, drive type: Elektro, Low-level order picker Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 24V Ledjyyf T Ajpfx Anceaa Battery year of manufacture: 2018

Condition: used, centre height . mm total power requirement . kW weight of the machine ca. . t Laedpeyycytsfx Ancja dimensions of the machine ca. . m

Condition: used, length 750/630 mm width 780/530 mm depth 470/320 mm Ljdjyycw Ejpfx Ancjaa The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2011, condition: excellent (used), I sell the Stacking / Destacking device MEINERT (IMA Group) P620 E/S - 2500 / 1300 System, year 2011. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Rotating head Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Ledoh Hp Dtspfx Ancsaa Working capacity apprx 16 tacts / min Material thickness 10 - 50mm Min. Material size 250 x 320 mm Max. Material size 1300 x 3000 mm Total area covered L.10.200mm x W.8700mm Total power 45kW Year 2011. Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: P0000581, Bonding device from Alba Industries GmbH, used as a parts dispenser 24VDC / pneumatic. Includes extensive components from Festo, Norelem, Item, Gutekunst, Beham, Igus, ACE, Storz, Elesa & Ganter, Steyr-Werner, etc. Bill of materials of the installed elements see attached PDF. EPlan and pneumatic diagrams are available and can be viewed upon request and on-site appointment. Laedpjyybitefx Ancea

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Lsdpfxsyv H Elj Anceaa Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: used, functionality: fully functional, for extended medium to heavy-duty applications. With switchable power levels and mode control for a wider range of uses. • Cleans and passivates in a single operation • Can process any thickness of stainless steel • Electropolishing possible • Low operating costs • Cost-effective consumables and spare parts, saving time • Up to 10 times faster than pickling paste • No reworking required • No need for regrinding or polishing Lajdpfxsyx Sq Ej Ancja Flexible and robust • Ideal for large objects • Durable high-performance brush • Splash-proof housing • Machine does not overheat • Cable can be extended up to 12 meters • Operates at 250 watts • Can be powered by a generator

Condition: new, Year of construction: 2024, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Laedpsr D Nmksfx Ancsa On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, functionality: fully functional, machine/vehicle number: OVS10NEU, Year of construction: 2025, load capacity: 317 kg, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, construction height: 1,660 mm, empty load weight: 1,350 kg, total length: 1,460 mm, drive type: Elektro, construction width: 800 mm, High-level order picker Chassis number: OVS10NEU Mast type: Triplex Transmission: PMSM Condition: New unit Technical condition: New Front tire type: Polyurethane Front tire condition: New Rear tire type: Polyurethane Rear tire condition: New Battery voltage: 24V Battery capacity: 150Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Maintenance-free PMSM drive motors with high efficiency - DC pump and steering units with extended service life and minimal maintenance requirements - Lithium battery: 24V / 150Ah - Maximum platform height: 4,600 mm Lasdpfx Asyx N Tkoncsa - Maximum working height: 6,600 mm - Load capacity: 317 kg - 90 kg rear storage compartment - 100 kg front storage compartment - 127 kg operator platform - Drive units with suspension system for improved stability, safety, and comfort - Keyless PIN code panel with RFID card support - Electric lift and lower buttons - High-performance control grips with dual-hand safety operation - LCD display indicating speed, steering mode, operating hours, energy, error codes, etc. - Complies with EU and US regulations - Four different driving modes for various applications - Front-wheel steering for longer distances - Rear-wheel steering for tight and hard-to-reach areas - Lateral (parallel) travel possible - On-the-spot turning (very high maneuverability) possible - Automatic speed adjustment depending on lift height

Condition: used, table diameter 450 mm swivelling range 90 Grad table height 450 mm number of T-slots 8 Stck. weight of the machine ca. 140 Kg Laedpfx Aoyx Iqnjncoa dimensions 0,9 x 0,8 x 0,6 m Dividing table with: - Rotary and swivel axis - Axes are moved via handwheel - Both axes can be clamped

Condition: used, CNC / Milling Clamping Devices – Comprehensive Lot approx. 150 kg Description For sale is a comprehensive package of clamping devices suitable for CNC milling machines as well as conventional machining. This package comes from our workshop inventory and includes a wide variety of clamping and fixturing components that can be used universally in manufacturing, tooling, or maintenance applications. Due to the quantity and diversity, the lot is ideal as a basic set or to supplement existing clamping equipment. — Scope of Delivery (mixed package) • Clamping claws in various sizes • Fixture blocks and clamping pieces • Round holders / clamping plates • T-slot nuts and fastening elements • Screws and accessories • Various fixtures and single components Total weight: approx. 150 kg Sale is preferably as a complete package. — Condition • Used • Fully functional • Mixed assortment • Partially with signs of use Ledpjyx Hgujfx Ancoaa — Commercial Notice The total value of comparable individual components is significantly higher than the asking price. This package offers a cost-effective opportunity to acquire a comprehensive set of clamping equipment. — Location & Collection Location: Eisenach Collection preferred (due to weight), but shipping by freight forwarder is possible upon request: €90 Loading by arrangement possible The sale is made with the exclusion of any warranty and liability for material defects. The clamping devices are purchased as seen.

Condition: ready for operation (used), Etalon Polo Horizontal Length Measuring Device Measuring Bench Gauge External measuring range: 0 ÷ 100 mm Internal measuring range: 5 ÷ 100 mm Measuring span: 50 mm Output device resolution: 0.001 | 0.0001 | 0.00002 mm Lsdpfowcxgzox Ancjaa Error limit 0.5 µm Measuring force, adjustable: 0 ÷ 4 N Support table height adjustment: 18 mm Length: 500 mm Width: 170 mm Height: 170 mm Weight: 41 kg Accessories: Mounting plate with H-shaped recess Mounting block for floating measuring table Control system for lever dial indicators Floating measuring table with tip holder 1 pair of measuring inserts 1 micrometer spindle for testing dial indicators and lever dial indicators Application examples: - Checking plug gauges with a control system - Checking plug gauges and test pins with a floating precision measuring table - Measuring test pins - Checking ring gauges with a mounting system - Checking thread plug gauges with a control system. - Testing dial indicators You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Year of construction: 2002, condition: used, functionality: fully functional, 2 level conveyor system to deliver materials from Warehouse to production and back to warehouse. Lasdpfx Anoyx Dd Rocoa

Condition: good (used), functionality: fully functional, overall weight: 500 kg, total length: 1,200 mm, total width: 700 mm, total height: 900 mm, table length: 320 mm, table width: 320 mm, working length: 500 mm, LASEREVO G 05 JW Fiber Laser Marking Machine Note: The item must be collected between 12.05. and 22.05.2026 at an appointment to be agreed in advance. Lasdpfoyvrwaox Ancea FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter Lasdpjwiwnqefx Ancoa

Condition: good (used), Year of construction: 2015, operating hours: 20 h, functionality: fully functional, Indexing hand device for grinding and milling machines as well as other applications. Robust cast body on swivel angle and base plate. Interchangeable T-slot nuts 10 mm. Comes with reduction sleeves MK6 - MK5 and MK6-SK50, index plate T24. Additional index plates with other divisions used, unit price € 60.00. Used clamping devices – please inquire. Laedpfx Asyxyxkoncea

Condition: excellent (used), power: 125 kW (169.95 HP), fuel type: diesel, first registration: 07/2017, Year of construction: 2017, operating hours: 7,200 h, LASER SYSTEM Lodpfjyxrw Sex Ancoaa = Further information = Model year: 2017 Drive: Track Number of cylinders: 6 Unladen weight: 19,580 kg Dimensions (L x W x H): 550 x 299 x 325 cm Working width: 380 cm CE marking: yes Technical condition: very good Optical condition: very good

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 1,000 kg, total length: 37,030 mm, total height: 4,310 mm, total width: 4,590 mm, shelf height: 4,310 mm, We are offering a used, fully functional flow rack system with a two-level construction (ground floor and upper floor) for sale. This system is perfectly suited for storage and order picking according to the FIFO principle (First In – First Out) and is ideal for logistics, shipping, or manufacturing operations. The racking is optimized for cartons with dimensions of 600 x 400 x 250 mm, accommodating a total of up to 3,000 cartons. Dimensions: The entire system has a total length of approx. 37 m, divided into two sections: one continuous block (approx. 20 m), a staircase section (approx. 1.3 m), and a second block with a walk-through passage (approx. 15.6 m). The total depth is approx. 4.6 m and consists of two racking depths of 1.3 m each, as well as a central service aisle of approx. 2 m. The upright height is approx. 4.3 m; the bottom edge of the intermediate deck (upper floor) is at approx. 2 m, providing sufficient clearance for ergonomic work on the lower level. Configuration and equipment: Each bay is approx. 2.12 m wide (upright width approx. 0.1 m) and contains a total of 10 flow channels – 5 on the lower and 5 on the upper level. Shelf heights are variably adjustable via perforations in the uprights, allowing flexible adaptation to different article sizes. The shelves are equipped with roller conveyors that have a slight incline, ensuring goods and handling units automatically move to the picking side. Access to the upper floor is via an integrated staircase. A central aisle between the rack rows allows loading from the rear and picking from the front. Lodpfx Ansyxqhvecsaa Load capacities (with evenly distributed loads): - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor: 250 kg/m² Summary of core data: - Total length: 37.03 m - Overall width / depth: 4.59 m - Upright height: 4.31 m - Headroom lower level: approx. 1.98 m - Bay width: 2.12 m - Shelves per bay: 10 (5 lower / 5 upper) - Roller conveyors: yes, inclined (FIFO) - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor load: 250 kg/m² The system will be dismantled at its current location prior to collection. Inspection possible by appointment. Self-collection required.

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Laedshma S Rspfx Ancja Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Weight: 20 kg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Sweep: yes

Condition: used, blade width: 400 mm, Sheet Straightener / Leveler Brand: Procesos del Fleje Model: 6011-E-S2 Laedpfxjydkz Ee Ancea Sheet width: 400 mm