Used Leiner Kkd-30 for sale (24,832)

Condition: used, Year of construction: 2008, functionality: unexamined, cooling capacity: 8 kW (10.88 HP), type of input current: three-phase, type of cooling: water, input voltage: 400 V, power: 5 kW (6.80 HP), input frequency: 50 Hz, Equipment: compressor, cooling unit, For sale: INTECO industrial chiller, model RM30, manufactured in 2008 (serial number 13423), installed and serviced by FRIAZ – Frio Industrial de Azeméis, Lda. Water cooling unit with a cooling capacity of 8 kW, electrical power of 5 kW, and three-phase power supply (3 x 400V / 380V, 50 Hz). Operates with R407C refrigerant (8 kg charge) and includes a dedicated RM30 control panel with indicators for start/stop and alarms (HP, SA, TAH, RT, RR). Structure made of painted sheet metal (white/blue), with compressor and heat exchanger visible through a panel with a protective grille. Condition: it was in normal operation until approximately 2 months ago, when it was taken out of service. It has not been tested since then. It shows normal signs of wear and tear for its age and installation period. Tjdpfx Ajzvdgkjmrec

Condition: refurbished (used), functionality: fully functional, inspected and tested Tjdozvfarjpfx Amrjc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees Tsdpszyy Rmofx Amrjc - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: like new (used), functionality: fully functional, number of rollers: 4, roller (bottom) diameter: 660 mm, roller (top) diameter: 660 mm, side roll diameter: 525 mm, working width: 3,050 mm, sheet thickness (max.): 60 mm, overall weight: 113,000 kg, total length: 6,500 mm, total width: 5,200 mm, total height: 4,250 mm, Equipment: documentation/manual, HYDRAULICS Useful length mm 3050 Thickness mm 60 Upper roller diameter mm 660 Lower roller diameter mm 660 Side roller diameter mm 525 Lower roller movement mm 110 Bending roller movement mm 465 Approx. weight kg 113,000 USED MACHINE OVERHAULED Tedpfx Aowrnkhjmroc

Condition: good (used), Year of construction: 2011, operating hours: 8,239 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 5,700 kg, mileage: 8,239 km, TRIPLEX forklift, brand STILL Year of manufacture: 2011 Todpfx Amozaaw Isrsc Capacity: 3,000 kg Lifting height: 5,390 mm Equipped with a FREELIFT Equipped with a SIDESHIFT and FORK SPREADER Mast height: 2,500 mm 8,239 hours on the meter Battery replaced in 2021, equipped with an external charger and automatic filling system Video to follow.

Condition: used, mileage: 128,511 km, power: 103 kW (140.04 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 2,160 kg, maximum load weight: 880 kg, overall weight: 3,040 kg, wheelbase: 3,450 mm, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 5,413 mm, loading space length: 3,120 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Passenger double seat, interior trim, wooden load floor, reinforced suspension, wheelbase type L2, height type H2, high roof, roadworthy, touchscreen, rear warning system, sun visor, partition, lumbar support, heat-protective glazing, clock & tachometer, iPad/iPod connection, 5-door, front-wheel drive, 2nd owner, Euro 6d, green environmental badge (4), new inspection, steel rims, spare tire, rear view camera, black, 6-speed transmission, sliding door on the right, parking assist, parking assist camera, parking assist sensors (rear), traction control system, electric windows, radio, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, speed limiter, comfort seats, center armrest, country version Germany, airbag driver side, electric windows (front), adjustable steering column (steering wheel), sliding door loading/passenger compartment (right), driver's seat with armrest and lumbar support, start/stop system, daytime running lights, central locking with remote control, storage compartment dashboard (lockable), electric exterior mirrors, heated exterior mirrors, electronic parking assist, speed control system (cruise control) including speed limiter, rear wing doors (opening angle 270 degrees), reinforced rear axle (suspension), infotainment system with 7-inch touchscreen, digital radio reception DAB, Bluetooth interface, air conditioning, fuel tank 90 liters, cargo area partition, LED lighting in cargo area, acoustic rear warning system (external warning signal), rear view camera system, Bluetooth audio streaming, driver's seat height adjustment, USB connection. Vehicle available immediately. Vehicle financing price: We will gladly provide you with an individual financing or leasing offer tailored to your needs. We can also take over existing loans and accept your used car in part exchange. Nationwide registration service possible = price on request. Nationwide vehicle delivery possible = price on request. Warranty or warranty extension for every vehicle = price on request. Tedpfxez Aid Ij Amrsc

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 Tjdpoz Aaw Sjfx Amroc - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW Tedpfx Aozux Tpemrsc - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: Tjdpfx Aezuy A Ssmrsc The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 3.800 kg Tsdpeu Sq Inefx Amrjc Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 702563, Year of construction: 2007, operating hours: 7,720 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,280 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 6,500 mm Free lift: 2,280 mm Mast height: 3,100 mm Fork length: 1,190 mm Minimum fork width: 250 mm Maximum fork width: 1,100 mm MACHINE DETAILS Tedpfozxckajx Amroc Mast type: Triplex Fuel type: LPG Engine manufacturer: Nissan Number of wheels: 4 Dimensions (L x W x H): 2,830 x 1,240 x 3,110 mm Transport packages: 1 piece Operating hours: 7,720 h EQUIPMENT Side shift Work lights Partial cab Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 8,907 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: telescopic, construction height: 2,900 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 250/60 - 12, rear tire type: superelastic tires (black), rear tire size: 180/70 - 8, overall weight: 5,285 kg, total height: 2,900 mm, total length: 2,350 mm, total width: 1,300 mm, fuel: electricity, Equipment: cabin, STILL RX 60-30 / 6323 – Electric 4-wheel forklift Tedpfoz Aptisx Amrec TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.650 mm Closed height: 2.900 mm Mast: Standard (2W465) Fork length: 1.200 mm Fork carriage: 3A Drive: Elektro Battery: 80 V 620 Ah (2017) Charger: 80 V - not tested Tyres: Superelastik 250/60 - 12 (40%) / 180/70 - 8 (25%) Service weight: 5.285 kg Length: 2.350 mm Width: 1.300 mm Year of manufacture: 2009 Operating hours: 8.907 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin Internal no.: 1308860 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 680 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,642 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,780 kg, total length: 3,189 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Load centre: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: Pneumatic Front tyre condition: 80 - 100% Rear tyre type: Pneumatic Rear tyre condition: 80 - 100% Tedpsvuck Nsfx Amrjc Sideshift, 3rd valve, rear work light, front work light, heating, full cabin, beacon,

Condition: new, functionality: fully functional, machine/vehicle number: G30C25, overall weight: 33 kg, operating pressure: 207 bar, compressed air connection: 7 bar, Air-assisted 30:1 Merkur complete system: - Incl. Airmix spray gun PerformAA 50 - Chassis mounting - Incl. spray gun air-material hose, material filter - Permissible material operating pressure: 207 bar - Max. air inlet pressure: 7 bar - Max. material flow rate: 1.5 l/min. Todpfxezv S T Es Amrec Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Sales notes: Sales exclusively to business customers. No sales to private customers. Sales and delivery exclusively within the EU – no sales to third countries. Delivery conditions and shipping costs based on individual effort and agreement. The sale is made with the exclusion of any warranty. Are you looking for other machines or similar products? Please do not hesitate to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical product range available. We will gladly check if we can offer you a suitable alternative.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516353H00894, Year of construction: 2017, operating hours: 4,650 h, load capacity: 3,000 kg, lifting height: 4,440 mm, free lift: 1,380 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Number of wheels: 4 Lifting capacity: 3,000 kg Lifting height: 4,440 mm Free lift: 1,380 mm Fork length: 1,200 mm Fork width, maximum: 1,055 mm Fork width, minimum: 250 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery brand: Still Battery capacity: 775 Ah Battery voltage: 80 V Tsdpfxszxcivj Amroc Battery tray length: 1,025 mm Battery tray width: 710 mm Battery tray height: 765 mm Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,190 x 2,120 mm Overhead height: 2,125 mm Transport dimensions (L x W x H): 2,403 x 1,198 x 2,125 mm Transport weight: 3,956 kg Operating hours: 4,650 h EQUIPMENT Charger Side shift Documentation available CE marking

Condition: good (used), Year of construction: 2014, operating hours: 6,307 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 5,500 kg, mileage: 6,307 km, TRIPLEX forklift, brand STILL. Year of manufacture: 2014. Capacity: 3,000 kg. Lifting height: 5,390 mm. Equipped with a FREELIFT system. Equipped with SIDE SHIFT and FORK SPREADER. Mast height: 2,500 mm. Only 6,307 hours on the meter. Battery replaced in 2019, equipped with an external charger and automatic filling system. Watch the video on YouTube. Tjdozaawbjpfx Amrec

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Tjdpfxoy T Ixne Amrjc Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V Tjdpfowkpvvsx Amrjc - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 09/2028, Year of construction: 2020, Equipment: ABS, Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova German Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload For sale is a used Langendorf SATÜ 30-10.0 M low-loader from 2020. The semi-trailer features wheel recesses, remote control and three axles, two of which are steered and one is liftable. With a 10,000 mm long loading platform and a technical payload of 36,540 kg, the low-loader is ideally suited for the transport of construction machinery, wheel loaders, excavators and other heavy equipment. Technical data: * Manufacturer/Model: Langendorf SATÜ 30-10.0 M * Vehicle type: Low-loader * First registration: 06/2020 * Year of manufacture: 2020 * Axles: 3 * Two steered axles * One lift axle * Overall length: 13,900 mm * Loading platform length: 10,000 mm * Technically permissible gross weight: 48,500 kg * Tare weight: 11,960 kg * Payload: 36,540 kg * Wheel recesses * Remote control * MOT: New * Vehicle number: G400133 * Condition: Used * German vehicle Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: G400133 * Purchase price: €54,900.00 * Down payment: 10% Todpfx Amsy A Uxasroc * Term: 60 * Monthly rate: €849.02 * Residual value: €10,380.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 – robot only, 20% discount when ordering more than one robot. Tsdpfx Aszxbnqomrec DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2013, fuel type: electric, Mast: articulated arm Todezfm Rdopfx Amrsc Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2013, fuel type: electric, Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Tedpfozfm Rwjx Amrjc

Condition: used, Year of construction: 2013, fuel type: electric, Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Tjdpfx Amozfknterec

Condition: used, Year of construction: 2012, fuel type: electric, Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Tedjzfkvkspfx Amroc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,043 h, load capacity: 3,000 kg, lifting height: 6,450 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,955 kg, total height: 2,600 mm, total length: 2,850 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, LINDE H 30 T -02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Tsdpez Ap Nwsfx Amrsc Lifting height: 6.450 mm Closed height: 2.600 mm Free lift: 1.800 mm Mast: Triplex (3F645) Fork length: 1.200 mm Fork carriage: FEM 3 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (20%) / 23 x 9 - 10 (60%) Service weight: 4.955 kg Length: 2.850 mm Width: 1.250 mm Year of manufacture: 2015 Operating hours: 11.043 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Double clamp, Sideshift, Double pallet clamp Internal no.: 1202070 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.