Used Kuhn Ga 8731 for sale (6,078)

Condition: like new (used), Tapping dies Hnodpfx Aoivzcksgmen R 2 for GA 4 Tapping dies for Georg Fischer GA 4 tapping machine as new GF Art. 012209

Year of construction: 2021, condition: used, (1) Gas Chromatograph Mass Spectrometer Hnodpfx Aezbaw Rsgmsn Technical Details: Shimadzu Gas Chromatograph Mass Spectrometer with AOC-20S autosampler and ASOC-20i autoinjector.

Condition: excellent (used), Year of construction: 2011, S016230 PROD. ATLASCOPCO TYPE GA75VSD S/N API658180 Hedpfozcnu Tex Agmjnn YEAR 2011 POWER (kW) 75 CAPACITY (m3/min) 14.68 PRESSURE (bar) 13 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Hnsdpszcmblefx Agmon Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Year of construction: 2023, condition: used, Best regards, including: automatic sample injector autosampler 7693A, 5977C GC/Insert Plus MSD Turbo EI/CI package, 8890 GC system mainframe MS Ready S/SL, AIS tower, serial no. CN23285160, membrane vacuum pump, manufacturer Pfeiffer, serial no. 109120905, vacuum pump Duo Line, manufacturer Pfeiffer, serial no. 22139727, gas lines / valves, serial no. MY2328V093 +++ Please note: This item is part of an online auction! +++ Hodpfx Aeyvgqwegmsnn

Condition: good (used), functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 4,750 mm, fork length: 1,200 mm, overall weight: 4,000 kg, total height: 2,100 mm, total length: 4,000 mm, total width: 1,200 mm, Equipment: fork extension, DOOSAN G 20 SC-5 LPG Forklift - incl. fork extensions: 2000 mm Hnodey Dcwmspfx Agmjn Note: The item must be collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. 3 units available. Year of manufacture: 2010 Burner power regulation: gas – modulated oil – 3-stage Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. Hedpfxezcg Hzs Agmonn CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: Hsdpjxv Dh Iofx Agmenn • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Hnedeg R Sh Aspfx Agmjn Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 1999, Manufacturer BLACKHEAT BH 50 year of production: 1997-2002 heat output: 45kw gas type: G20 nozzle diameter: 6mm nozzle pressure 8.7mbar pipe length: 9-12 meters Hodpfxen Uvgie Agmenn p connection: 360mbar Connection voltage: Max. current consumption: IP30 AC 230V 50Hz

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats Hnodpfehrnv Nex Agmon honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Hnedpfed Tiu Esx Agmon Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: used, functionality: limited functionality, Year of construction: 2013, Gallignani baling press Hnedpfx Aozb I Nhegmsn Subject to prior sale – all information is provided without warranty. We cannot guarantee the accuracy or completeness of the information provided here. Any warranty and/or liability is excluded. Deviations from the description above cannot be ruled out. We would like to point out that the subject of the purchase agreement to be concluded will be exclusively the motor vehicle in its actual condition.

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Hsdpfsv Rmmmox Agmsnn

Condition: good (used), Year of construction: 2005, operating hours: 50,000 h, functionality: fully functional, overall weight: 850 kg, Equipment: refrigerant dryer, Screw compressor, 22 kW, with built-in refrigerated dryer; disassembled but in good condition. Hnjdpfx Agozb Drxemsn

Condition: like new (used), Year of construction: 2020, WEISHAUPT WM-G30/1-A, MULTIFLAM, with gas line DUNGS DN 80 Model: ZM-3LN Hnjdpfx Aozbz Idegmon Year of manufacture: 2020 Output: 400-3500 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 580 mm, turning diameter: 350 mm, spindle motor power: 15,000 W, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 76 mm, overall weight: 4,000 kg, FOR SALE: Goodway GA-2600 CNC Lathe Are you looking for a reliable and efficient CNC lathe for your workshop? We are offering a Goodway GA-2600 in good working condition, equipped with a dependable Fanuc control system. This machine provides a compact yet capable setup for precise turning operations. The machine is available from stock. General Specifications Manufacturer: Goodway Model: GA-2600 CNC control: Fanuc Availability: From stock ### Key Technical Characteristics Hnsdpjzbx R Aefx Agmon Maximum turning diameter: 350 mm Maximum turning length: 600 mm Diameter over the bed: 580 mm Diameter over cross slide: 400 mm Spindle speed: 4000 rpm Spindle motor power: 15 kW Spindle bore: 76 mm X-axis travel: 205 mm Z-axis travel: 630 mm Number of tool positions: 10 Tailstock: No Bar feeder: No Contact us today to request a quote! The machine is ready for immediate shipment. (All information is provided in good faith, but we reserve the right to make errors).

Condition: good (used), Inert gas welding device, inert gas device -Max. Welding power: 340 A. Hnedpfeb Hiy Sox Agmsn -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Condition: used, Technical details: temperature max.: 800-900 ° muffle size (length): 700 muffle size (width): 300 muffle size (depth): 300 mm total power requirement: 90 kW weight of the machine ca.: 0,13 t Hsdpfxjw Rkulj Agmsnn Small chamber forging furnace. In 2017, the refractory bricks inside were renewed for €5,000. *

Condition: used, Year of construction: 1979, * Hnedpfx Agou Nv Nfsmjn

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm Hodpfxsv Iplao Agmonn turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 2925 mm saw band width: 0,9 mm cutting range 90 degrees: round: 270 mm cutting range 90 degrees: flat: 350x240 mm cutting speed: 35/72 m/min height over floor: 1,050 mm total power requirement: 1,9 kW machine weight approx.: 660 kg dimension machine xH: 1,2 x 0,75 x 1,05 m Bandsäge - Halbautomat schwere Industriebandsäge mit Rollenbahn Gehrungsschnitt möglich Hjdpfov T Tcmex Agmsnn hydr. Werkstückklemmung i.D. *

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Heidebrenner stool stove Gas cooker Hodpfxegx T A No Agmenn Model: AKO 70 1-leaf gas burner Stainless steel version with chassis for bottles of gas Nominal heat load 3.8 kW Dimensions: 410 x 410 x 700 mm, WxDxH Used equipment cleaned Visit our large bakery machines warehouse!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 12,100 mm, total width: 2,300 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Lisec gas filling press FPS-36/25US, year 2005, consisting of following components: RTVN-27/25MZ, measuring section for gas filling press FPS-36/25US, gas filling press for Argon RTVN-32/25ST, outlet conveyor 1 of gas filling press RTVN-22/25ST, outlet conveyor 2 of gas filling press RTVN-16/25ST, outlet conveyor 3 of gas filling press The line machine was working until dismantling date and will be available from current location end of June 2026. Hnodpfx Aozbdbmegmen

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen We will be glad to answer your questions via Phone and E-mail Hjdpfotulh Ijx Agmjnn