Used Klöckner-Moeller Ps3 for sale (176)

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Laodpfx Aopugwijb Ash The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, turning length 2000 mm centre height 330 mm swing diameter over bed slide 660 mm turning dia. in gap 900 mm swing diameter over slide rest 460 mm spindle bore 105 mm turning speeds 25 - 1600 U/min bed width 400 mm spindle taper 55029 D 1-8 taper in tailstock 5 MK quill travel 235 mm total power requirement 7,5 kW weight of the machine ca. 2900 kg. range L-W-H 3630 x 1200 x 1520 mm Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain Lsdpfexabpqjx Ab Ajah - Operating tool

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder Lsdpfx Absxab Nqe Asah - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 185 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter Lajdpfx Absxaau Eo Ajh - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1675 kg. range L-W-H 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard Lasdexab H Aopfx Ab Aoh - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers Ledpfx Aeh Hnp Djb Ajah - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, Ljdpefxyh Hefx Ab Aoah :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, mileage: 1 km, driver cabin: other, Vehicle location: Bovenden. Equipment: Side snowplow, blade height 1500 mm, weight approximately 864 kg, plow width 3600 mm, clearing width 2550 mm, angle of attack 45°. Hydraulic pivoting. Lajdpfxji Rm Sps Ab Ajh ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale and errors!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT10401014064, empty load weight: 1,500 kg, maximum load weight: 2,300 kg, overall weight: 3,800 kg, axle configuration: 1 axle, loading space length: 2,000 mm, loading space height: 1,000 mm, total length: 4,300 mm, total width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: green, - Single-axle container trailer - Type EPS 38 for diesel generator set body - Multiple units available - Please note: archive images! #Chassis single-axle trailer - Welded construction in fine-grain steel - Generator set secured by bolted connection - Reinforced front jockey wheel, mechanically adjustable in length, folding at the bottom - 1 pair of 2-speed landing legs at rear, with straight lower section, left and right operated independently - 2 wheel chocks with holders - Aluminium side underrun protection, painted RAL 6031 bronze green matt - Steel rear underrun protection, painted RAL 6031 bronze green matt - Mudguards in front of and behind the axle, with sheet-metal cover on top - With anti-spray mud flaps - 2 pairs of lashing cut-outs, 1 pair front and 1 pair rear, recessed into the cross members, each rated 3 t for loading the trailer, marked (sticker) - 4 pairs of ferry lashing eyes, marked yellow - Lashing point sticker on each lashing eye - Rosette-pattern perforated steel plate on both sides outside next to the generator set, pull-out ladder on both sides - Holder for 2 x 20 l fuel cans on the vehicle frame, right-hand side in direction of travel - Central lashing point sticker - Steel storage box at front, recessed into the floor, with drainage holes, lined with perforated rubber mat, lockable lid #Towing device single-axle trailer - Drawbar with tested reversible towing eye: 40 mm / NATO eye (changed by turning) - Drawbar height-adjustable via spindle; nut for spindle mounting bolt at bottom, right-hand side in direction of travel - Parking sockets for electrics/EBS and air #Axle + suspension - BPW axle with taper roller bearings and S-cam brake - Axle/running gear laser-aligned – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushes #Wheels and tyres - 235/75 R 17.5 - Make at manufacturer's discretion - Steel rims, factory silver #Braking system - Dual-line air brake system - Spring brake actuator parking brake - 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle - Yellow connection on the left and red connection on the right in direction of travel - ABS/EBS electronic braking system with EBS connector at front, with connecting cable Laodpszazrtjfx Ab Ajh - EBS modulator mounted in a protected position - Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! - Vehicle stability system #Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - ADR-compliant electrics with certificate - 2 white front position lamps and reflectors - 2 white/red rear outline marker lights - 1 x 15-pin socket + 1 x detachable 15-pin coiled cable at front #Registration / plates - Country of registration: Germany - With DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape acc. to ECE R 048, rear only, white - Warning plate acc. to ECE-70 #Paintwork - Frame RAL 6031, bronze green matt - Drawbar in frame colour

Condition: good (used), Control unit, control panel, control panel, control unit, foot switch, safety foot switch -Foot switch: with control box -Metal housing: with protective cover, die-cast aluminum -Switch box: with power supply block GLC 230/24-2 -Switch: Siemens -Contactor: 2x Moeller DIL EM-01-G -Individual components: see photos -Transport dimensions: 580/300/H200 mm -Weight: 10.5 kg Laedpfewyupaex Ab Aeh

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch Laedpfx Ajh Eiw Ieb Ash - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, isolating switches Lajdetxkq Ajpfx Ab Ash -Manufacturer: Moeller, motor protection switch -Type: PKZMO 1-1,6 -Number: 3x switches available -Price per piece -Dimensions: 85/55/H80 mm -Weight: 0.2 kg/piece

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, isolating switches -Manufacturer: Moeller, motor protection switch Lajdpjtxkqvjfx Ab Aeh -Type: PKZMO 1-06 -Number: 5x switches available -Price per piece -Dimensions: 85/55/H80 mm -Weight: 0.2 kg/piece

Condition: excellent (used), Year of construction: 2018, overall weight: 433 kg, volume flow: 3.93 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, Screw compressor AIRPRESS APS 35 Engine 26 kw Capacity 3,93 m3/min Pressure 10 bar Year of production 2018 Ledpfx Aoqbt Ansb Asah Mileage 8734 mtg Compressor fully operational, after service, filter and oil change.

Condition: used, empty load weight: 6,780 kg, maximum load weight: 28,720 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 05/1999, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,910 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 55 R 22,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, liftable 1st axle, raising + lowering, ABS (anti-lock braking system), Edscha, curtain, portal doors, lashing rings, storage box. Body: EDSCHA / CURTAIN. Accessory details provided without guarantee; subject to changes, prior sale, and errors! Lajdpoxmawaofx Ab Ash

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,180 mm, Equipment: ABS, Availability: Immediately NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Empty weight 6,100 kg # Fifth wheel load 15,000 kg # Fifth wheel height: 980mm # BPW axles with disc brakes # 1st axle as lift axle # Jost support feet 24t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V lighting system Aspöck # Tires 6 x 445/45 R19.5 branded tires on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width device (4x over-width panels galvanized with LEDs + 1x rotating beacon) # 2 stainless steel tool boxes in the direction of travel right & left # 6x2 Jost container locks, retractable # Stake holder mounted on front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 4t on the platform 108 lashing points in the outer frame with 2t each # Side walls 600mm high & removable including depot under the vehicle # Chassis KTL coated and painted in RAL 3020 Lasdpfx Aovm Nm Ieb Ash # Front wall RAL 3020 ----Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in Goch

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Laodopgmryspfx Ab Ajh Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: used, Technical details: Lsdpfx Abeu Nlgmj Aeah faceplate diameter: 318 mm width: der Planscheibe: 56 mm max. passage: Ø 54 mm weight: 17 kg dimensions: Ø 318 x B: 101 mm technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm *

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,950 kg, maximum load weight: 23,050 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, total length: 9,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis – Central axle trailer design Fine-grained steel welded construction Gear-supported front leg Hydraulic rear supports Wheel chocks with holder Aluminum side impact protection Without under-run protection Mud flaps at the rear, covering the entire width Mud flaps in front of each axle and anti-splash mud flaps behind each axle Plastic tool box, with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening elements to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3,000 mm Tie-down points for low-bed trailers Recessed ring-type tie-down points in the outer frame, each rated at 5 tons (can be converted to stake pockets) Tie-down eyes at the top and on the sides in the outer frame, each rated at 10 tons Towing device – Central axle trailer Drawbar with a tested 50 mm tow hitch Axles + Suspension Drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Last axle with trailing arm steering, with automatic reversing lock controlled via the reversing light, and an additional locking function on the vehicle via a manual button. Air suspension 1st axle – automatic lift axle, additionally manually lowerable, operable with a button on the vehicle Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle height in conjunction with the lift axle; when the lift axle is raised, the loading or overall height increases by 50 mm Vehicle – Driving stability system Trailer Info Center for displaying vehicle data such as axle loads, mileage, and diagnostic/system messages Axle load detection via EBS-CAN bus signal for display on the display in the cab Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin fail-safe plugs at the front, with connection cable Additional LED work light at the rear LED rotating beacon with mount Warning signs, LED illuminated and extendable to 3,000 mm Floor Subsequently with 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Laodozcv D Nopfx Ab Ajh Low-bed platform including rear slope 7,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood Hydraulically operated via towing vehicle’s auxiliary drive with throttle, operation on the left side in the front Hydraulic lateral adjustment of the ramps, individually controllable Hydraulic connection with quick-release coupling NW 10/3, including connection hose Customized transport solution

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, planing width: 330 mm, rotational speed (max.): 9,000 rpm, total width: 615 mm, total height: 555 mm, total length: 850 mm, chip removal: 3 mm, height adjustment type: mechanical, number of feed rollers: 1, number of planer blades: 36, planing height: 156 mm, PS33 with spiral shaft • Innovative design and powerful motor. • Chip removal of up to 3.2m. • IN & OUT TABLE. • Double knife cylinder with double-sided knives. • Indicator shows the material removal on the front of the machine. • Planer shaft with reversible knife • No extraction system required thanks to integrated fan to remove sawdust from the planer cylinder • Depth stop with seven positions for repeated thickness planing at the same height • Maximum part width up to 330 mm • Type: PS33 • Recommended use: Craftsmen • Input power (230 V): 1.8 kW • Planer shaft speed: 9,000 rpm. • Planer shaft diameter: 46 mm • Number of reversible plates in planer shaft: 36 pieces • Reversible plate size: 15 x 15 x 2.5 mm, R=150 • Feed speed: 7.9 m/min. • Max. material removal: 3.2 mm • Max. planing width: 330 mm • Max. planing thickness: 156 mm • Min. workpiece length: 120 mm • Extraction: integrated fan, 62 mm suction nozzle or fabric bag • Noise level: 96 dB • Machine dimensions (length x width x height): 340 x 615 x 555 mm • Machine dimensions with tables unfolded (length x width x height): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (length x width x height): 415 x 660 x 545 mm • Package weight: 39 kg Included in the package: • 36 carbide inserts (in the planer shaft) • 5 replacement carbide inserts and screws • Waste bag for sawdust and Dust • Connection set for waste bags • Torx key for changing the inserts (TX25) Laedpevncu Iefx Ab Ash

Condition: used, meta BLPS 304 II for measuring organic soil contaminants. Lasdpfx Aboivdhzj Aoh Software version 1.12 Delivered without sampling probes.

Condition: new, Year of construction: 2026, The CORMAK PS315PRO-2000 sliding table saw with scoring unit is a solid, precise, and versatile machine designed for use in carpentry workshops, furniture manufacturing plants, and wood-based material processing facilities. Thanks to its compact 2000 mm sliding table length, heavy-duty guides, and reliable scoring system, this model performs excellently in the serial cutting of MDF, HDF, plywood, and solid wood panels. Main Advantages of the Machine Sliding table saw with scoring unit – a dual-blade system ensures chip-free cutting, even in laminated and single-sided foil-coated materials. Stable and durable construction – a robust frame, cast iron tables, and steel guides guarantee long service life and resistance to deformation. Lsdpfx Absylxhvo Ajah Wide adjustment range – blade tilt from 90° to 45° and adjustable main blade height allow for a wide variety of angle and depth cuts. High rotational speed – 5800 RPM of the main blade ensures clean, fast cuts without material burn marks. Dust extraction compatibility – an integrated extraction port enables efficient connection to a dust collection system. Safety and ergonomics – blade guard, rip fence with scale, and safety components increase comfort and operational safety. Construction and Technology The PS315PRO-2000 sliding table saw has been designed for maximum stability and reliability. It features a rigid steel frame base, while the main working surfaces are made of precision-ground cast iron. The main cutting blade (Ø 315 mm) works together with a scoring blade (Ø 90 mm), eliminating the risk of chipping. The machine is equipped with two separate motors, ensuring independent operation of both cutting systems. Material movement is supported by a sliding carriage with a bearing-mounted guide. Clear length and angle scales allow for quick and precise cutting parameter adjustments. Precision and Performance The CORMAK PS315PRO-2000 sliding table saw has been optimized for machining accuracy and ease of use. With rotational speeds of 5800 RPM (main blade) and 4000 RPM (scoring blade), cuts are smooth, burr-free, and minimize the need for further finishing. The adjustable blade tilt enables precise angle cuts without the need to reposition the material. Standard Equipment Main cutting blade Scoring blade 2000 mm sliding table with support Rip fence and crosscut fence Mitre guide Blade guard with dust extraction port Table extension Eccentric clamp Blade tilt angle indicator Operation manual CE Declaration of Conformity Optional Equipment Additional cutting blades Dust extraction system Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width 1220 mm Blade tilt 45° Cutting height at 45° 80 mm Cutting height at 90° 100 mm Max. main blade diameter 315 mm Max. scoring blade diameter 100 mm Main blade speed 5800 RPM Scoring blade speed 4000 RPM Motor power 3.0 kW Power supply 400 V Dust extraction port 100 mm Weight 350 kg Warranty 12 months Manual included YES CE Declaration YES

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Moeller, frequency converter -Type: DF5-322-018 -Power: 0.4 kW -Input: 230 V 50/60 Hz -Output: 3AC 0...Ue -Number: 1x inverter available -Dimensions: 130/90/H115 mm -Weight: 0.8 kg Laedsxx Rw Ijpfx Ab Aeh

Condition: new, Number of sanding units 8 St. sanding width 25-240 mm Sanding height max. 15-140 mm B ROBA Fentech; Fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: Lajdpezqvn Ajfx Ab Aoh - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design - Freely selectable abrasive configuration from the MB Flex system. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at the machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x twin-spindle unit for right-side processing - 1x twin-spindle unit for left-side processing - 1x twin-spindle unit for processing from below - 1x swiveling twin-spindle unit for processing from above - 2.0 m outfeed table - Initial set of abrasives - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Plus freight and commissioning NEW FEATURE: Fentech Standard optionally upgradeable to orbital sanding: The orbital sanders are installed in an extended housing section positioned ahead of the standard machine configuration. This allows us to combine the effective, scratch-free sanding action of the orbital sanders with the finish provided by the brushes. This ensures that the visible surfaces of the window profiles have a perfectly flat finish, completely free of raised wood fibers thanks to the subsequent brush sanding process. (Technical specifications provided by the manufacturer – subject to change!)

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder, Type WL 6 Power: 18.5 kW Our WL 6 machine concept: The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer remnants, etc.) into fuel chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 RPM Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) - Star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Presser bar - Very robust Weima WAP gearbox Recommended accessories - Log spacer (free-cutting hopper) - 2nd knife row Available from stock in 54634 Bitburg Lajdpfx Aocbtpksb Ajh - immediately available -