Used Kasto Sawing Machine Type Hb 420 Au for sale (93,264)

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Bdodjudi Uzspfx Acnog Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min Bjdpsu Ng I Eefx Acnsdg double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Condition: new, Year of construction: 2026, The CORMAK MCB350HD Metal Band Saw is a professional-grade metal cutting machine designed for precise mitre cutting from -45° to +60°. Equipped with a heavy-duty cast iron saw bow and a gravity-fed hydraulic feed system, it is ideal for both small-batch and high-volume production. Its rigid construction and premium components enable efficient cutting of structural steel, stainless steel, tool steel, solid bars, pipes, and hollow sections. The machine is equipped with a quick-action vise lever, allowing fast and convenient workpiece clamping. Key Features Mitre cutting range from -45° to +60° – ideal for cutting pipes, profiles, and solid materials at various angles. Heavy-duty cast iron saw bow – provides exceptional rigidity, vibration resistance, and cutting accuracy. Precision blade guidance with carbide inserts – ensures accurate blade tracking while extending blade service life. Bedpoi D Di Sjfx Acnjdg Automatic shut-off after cutting – improves operator safety and reduces unnecessary power consumption. Gravity-fed hydraulic feed system – delivers smooth, continuously adjustable feed pressure throughout the cutting cycle. Construction and Technology The MCB350HD is built around a robust welded steel frame combined with high-quality cast iron components. The 25° inclined saw bow improves cutting efficiency while extending blade life. A durable worm gearbox drive system ensures reliable long-term operation, while the integrated blade tension indicator (dial gauge tension meter) provides precise blade tension adjustment for consistent cutting performance. The machine is also equipped with a blade cleaning brush, a closed-loop coolant system with electric pump, and a material stop with measuring scale, making repetitive cutting to identical lengths quick and accurate. Precision and Performance The CORMAK MCB350HD metal band saw offers two blade speeds of 36 and 72 m/min, allowing the operator to match cutting parameters to different materials. Precision blade guides featuring bearings and carbide inserts ensure straight, accurate cuts while minimizing blade wear. The coolant system delivers emulsion directly to the blade guides, improving cutting conditions, reducing heat generation, and extending tool life. Applications The MCB350HD is designed for manufacturing plants, metal fabrication shops, engineering workshops, and maintenance facilities where reliability, repeatability, and versatility are essential. It is suitable for cutting: Steel pipes Hollow sections Structural profiles Flat bars Solid round and square bars Stainless steel and other ferrous and non-ferrous materials Standard Equipment Blade cleaning brush Coolant system with pump and reservoir Material stop with measuring scale Bi-metal band saw blade Blade and gearbox safety guards Optional Equipment Roller conveyor table for material feeding Additional band saw blades Laser cutting line positioning system Technical Specifications Specification Value Blade dimensions 2950 × 27 × 0.9 mm Blade speed 36 / 72 m/min Minimum cutting diameter Ø 5 mm Minimum workpiece length 100 mm Vise base height 940 mm Total installed power 2.2 kW Drive wheel diameter 330 mm Overall dimensions (L × W × H) 2000 × 1330 × 2020 mm Weight 540 kg

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 Bdsdetqqrfjpfx Acnjg cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm With a cutter Bedpfx Aceulg Szsnodg

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Bjdpsu R Sy Njfx Acnedg Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: used, Year of construction: 2018, Technical details: x-travel: 3500 mm y-travel: 1300 mm z-travel: 1600 mm table-size: 3860 x 1200 mm mm turning speeds: 4.000 1/min max. torque on the spindle: 900 Nm tool change unit: 40 taper ISO: 50 rapid traverse: 35 m/min milling spindle drive: 43 kW control: TNC 640 HEIDENHAIN weight of the machine ca.: 24 t Bodpozipkbefx Acnodg Universal- CNC-bed-milling machine with toolchanger, • H200 universal milling head 2,5° x 2,5 ° • 40-ATC • 5-axis-interpolation • DCM collission control • Interpolation turning • M&H 3D-touchprobe • ICS 20 bar • paper filter + magnetic separator • cabin • 3 chipconveyor accessories: toolholder (approx. 40 pcs.) approx. 12.000 h "machine on", approx 5.000h "spindle on", still under power in closed factory *

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6023, Offer 18184 Bjdszrvfwjpfx Acnodg Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx.: - at 90° circular 140 mm - or rectangular 170 x 140 mm - Miter adjustable to the left and right 45 - 90 - 30° - Pneumatic saw blade feed - Pneumatic quick-release clamp - Pneumatic connection - Original machine base - Infeed roller conveyor 3000 mm - Outfeed roller conveyor with measuring stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Machine weight approx. 150 kg

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal cutting band saw is a high-performance semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulic technology make it an ideal solution for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all machine functions, significantly reducing operating time and improving work ergonomics. Main advantages of the machine Semi-automatic operation – hydraulic lifting and lowering of the saw arm and vice control via the control panel. Worm gear transmission with bronze components – ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min – allows adaptation to various materials and cutting conditions. Carbide blade guides with roller bearings – provide durability and highly accurate blade tracking. Quick-clamping vice – manually or hydraulically operated, with left/right positioning capability. Angular cutting from -45° to +60° – with precise angle reading on the scale. Durable cast iron body – guarantees cutting stability and long machine service life. Hydraulic arm lowering adjustment – allows precise control and setting of the return height. Construction and technology The BS530H model features a reinforced drive system and industrial hydraulic components, ensuring reliable operation even under intensive working conditions. The heavy-duty cast iron body reduces vibrations and provides smooth, consistent performance. The ergonomic control console allows all operations to be managed from a single location. The coolant system integrated into the machine base effectively removes heat and contaminants, protecting the blade from overheating and premature wear. Precision and work efficiency Bdsdpfx Acsw U Svlsnsg Thanks to stepless speed adjustment, manual or semi-automatic operating modes, and the use of a dial tension gauge for monitoring blade tension, the BS530H metal cutting band saw ensures repeatable results and high cutting quality even during long production runs. Work efficiency is further improved by the front material support roller and the arm locking system, which increases operator safety after completion of the cutting cycle. Applications The machine is designed for: industrial production plants, metalworking workshops, companies performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for serial production, steel fabrication, and preparing components for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Powered blade cleaning brush Coolant system with pump Front material support roller Dial blade tension gauge CE declaration and technical documentation (DTR) Optional equipment Additional material guide rollers Semi-Automatic Metal Cutting Band Saw CORMAK BS530H Technical data Parameter Value Working height 965 mm Cutting speed 30–80 m/min Saw blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total motor power 3.0 kW Power supply 400 V Machine dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm Bdjdpfxoxukppe Acnjg max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: used, Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: - Working width: 720 mm - Max. clearance: 820 mm - Drilling depth, vertical: 45 mm Bdedpfezryr Usx Acnog - Drilling depth, horizontal: 120 mm

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. Bedpsudi Unsfx Acnodg The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked Bsdpfeyyzqdjx Acnsdg - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Year of manufacture: 2014 Serial number: 130705-28 Power supply: 3×400 V, 50 Hz Bedpsw R E Slsfx Acnsdg Maximum power: 1.69 kW Weight: 650 kg Certificate: CE

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Bjdpou R S Hcefx Acnodg Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: used, Year of construction: 1970, x-travel 3000 mm y-travel 1350 mm z-travel 1400 mm spindle taper ISO 50 turning speeds 22-1400 U/min Rotary table 800x600 mm Bedpjyqu Rqofx Acnedg Table dimensions 2500x1200 mm Feed 5-3000 mm/min ball screw The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, Bed milling machine, lightly used with approximately 4000 hours. XYZ: 2000 x 1000 x 1000 mm Heidenhain: 530 TNC with HR 410 handwheel Spindle: 2.5 x 2.5 degree double swivel, 4000 RPM, ISO 50 Options: Temperature cooler Coolant chiller Linear scale in Y-axis IKZ 15 bar External cooling with 500 l ATC with SK 50 CNC rotary table with 600 mm diameter ZF gearbox Renishaw MP 10 Chip conveyor (longitudinal) Foot pedal Bdsdpfx Acjzt Sv Ueneg Coolant control cabinet

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Portal-Type Multitasking Turning and Milling Center in Gantry Design Brand: SCHIESS | Type: VMG 5-PS | Year of construction: 2010 / Start-up: 2011 The machine can be inspected by appointment. Condition: Operational / ready for use. Bdsdjy Dvwyspfx Acnog TECHNICAL DATA: - X-axis (Gantry): 13.500 (20.000) mm - Y-axis (Support slide): 10.900 mm - Z-axis (RAM): 3.000 mm - Drive power RAM: 100 kW - Passage width max.: 6.500 mm - Faceplate diameter: 5.000 mm - Workpiece weight on the faceplate max.: 150 tons - CNC Control System: SINUMERIK 840D sl Additional excellent, comprehensive features. Detailed technical data sheet and information on equipment available on request. No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm control HEIDENHAIN TNC 360 total power requirement / kW weight of the machine ca. / t Bjdpfx Aov H Ertocnsdg required space / m

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg Bdsdpou Rv Ttsfx Acnsg

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Bdodpfx Ajmrnk Eocnjg Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Bedsxw N N Hspfx Acnsdg Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2017, operating hours: 1,659 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 2,300 mm, spindle speed (min.): 3,250 rpm, total width: 9,700 mm, total length: 7,400 mm, total height: 5,200 mm, position of the milling head: ORIZZONTALE E VERTICALE, spindle diameter: 150 mm, travel distance W-axis: 900 mm, table load: 30,000 kg, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, table length: 3,000 mm, table width: 2,000 mm, quill diameter: 150 mm, grinding spindle motor power: 53,000 W, torque: 25,000 Nm, spindle nose: ISO 50, number of slots in tool magazine: 120, Equipment: rotational speed infinitely variable, LAZZATI CNC BORING MACHINE, T-SHAPE, HB 150T CNC Heidenhain TNC 640 X-axis travel: 6,000 mm Y-axis travel: 2,600 mm Z-axis travel: 2,300 mm W-axis travel: 900 mm Rapid traverse rate, X-axis: 12 m/min Rapid traverse rate, Z-axis: 15 m/min Rapid traverse rate, Y-axis: 15 m/min Rapid traverse rate, W-axis: 7.5 m/min Bjdpjznl Elofx Acnodg Spindle diameter: 150 mm Spindle connection: ISO 50 BBIG plus DIN 7388 Spindle rotation speed: 3,250 rpm Spindle motor power: 53 kW in S1 – 65 kW in S6 Max. axial thrust during drilling: 25,000 N Automatic universal head, 1° x 1° D’Andrea UT5/500s head Rotary table dimensions: 2,000 x 3,000 mm Table load capacity: 30 tons Tool changer: 120 positions Width: 9,700 mm Height: 5,200 mm Depth: 7,400 mm Weight: 750 kg INCLUDES: - Chip conveyor - 3-position head changer - Coolant system with through-spindle coolant supply, bar 35, coolant tank capacity: 1,000 liters USED MACHINE YEAR 2015 – INSTALLED 2017

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,000 mm, total width: 1,150 mm, total height: 1,550 mm, cutting range round steel at 90°: 125 mm, overall weight: 620 kg, saw blade speed: 2,800 rpm, length stop: 2,000 mm, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Bsdpfx Acotqfvyjnedg

Condition: good (used), Year of construction: 2000, x-travel 3500 mm y-travel 1600 mm z-travel 1200 mm spindle turning speed range 250 - 3000 U/min tool taper ISO SK-50 tool change unit 40 rapid traverse: 15000 mm/min. feed 5000 mm/min Bsdpfsykvayox Acnsdg table dimension - longitudinal 3860 mm table dimension - cross 1000 mm control HEIDENHAIN TNCi530 weight of the machine ca. 24 t dimensions of the machine ca. 8000 x 5000 x 4000 m