Used Kafo Vertical Machining Center for sale (72,255)

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Djdpszxhmtofx Albekt Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V Djdpfx Aljyanlasbskt - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Djdpfx Aezhi R Sjlbskt

Condition: excellent (used), Year of construction: 2014, operating hours: 21,800 h, functionality: fully functional, machine/vehicle number: P147YH288, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Dkedpfxjzhi Nzo Albst

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 120J434, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller model: FANUC 18 M, table width: 550 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Table size 1200 x 550 mm Longitudinal travel 1020 mm Cross travel 610 mm Vertical travel 560 mm Max. distance spindle to table 710 mm Max. load on table 1.000 Kg Spindle speeds 10.000 rpm Rapid movement 24 m/min Tool change 24 pcs Spindle taper ISA 40 Control FANUC 18 M Dkedpfx Alsymmh Tobet Cycle hours 7100 Timer

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Djdpfx Aezbvqgjlbekt Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: excellent (used), Year of construction: 2010, Data: XYZ: 600/400/460 mm Spindle speed: 10,000 rpm Heidenhain TNC 620 control unit Spindle: SK 40 Internal coolant system: 20 bar CNC Nikken / 4-axis, D 200 mm Oil mist extraction system Chip conveyor Dkjdezw T R Uopfx Albst

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Dkedpfx Aljyw Tm Esbst

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P. Direct sale to end-user only. Price includes loading at the seller's location: Dedpfx Aezw Rl Aolbskt W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Dkjdpewglfxefx Albet Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m Dkedpfxjzgu Aqo Albet The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. *

Condition: used, Technical details: x-travel: 1000 mm y-travel: 600 mm z-travel: 650 mm control: Siemens 810D shopMill distance spindle /table: min 130mm / max. 780 mm number of spindle speeds: 10000 U/min. spindle taper:: SK 40 tool changer with: 24 Plätze table-size: 1160 x600 mm interface: ja Weight approx.: 5,45 t Machine YOM in 2007 / only put into operation in 2009! 4th axis Oil mist extractor Dkodpfxsyfgiue Albot *

Condition: like new (used), Year of construction: 2008, operating hours: 3,088 h, functionality: fully functional, machine/vehicle number: P08ZWG962, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, feed rate X-axis: 54 m/min, feed rate Y-axis: 54 m/min, feed rate Z-axis: 54 m/min, total height: 2,336 mm, total length: 1,565 mm, total width: 2,027 mm, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,100 kg, spindle speed (min.): 24,000 rpm, distance table center to spindle nose: 250 mm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, The machine is in very good condition and has been used sparingly. It has only processed aluminum alloys. The machine comes with various tool holders, as shown in the photos – thermal tool holders, Weldon tool holders, etc., totaling 47 pieces. Additionally, it includes a probing sensor: Garant Hoffmann 359500 - a 3D digital sensor with a tactile probe. The spindle has a BT30 tool clamping taper. The video shows the machine with a 4-5 axis configuration, but this is not included in the sale. Direct sale to end-users only. The price includes loading at the seller's location: W-Technology s.r.o. Polní 8 Dkedpfx Aszw Iv Eelbot 79201 Bruntál Czech Republic

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Dksdpezw Ex Defx Albjt Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified.

Condition: used, Year of construction: 2007, RÖDERS RFM 600 with RCE 1 – High-speed machining center – 42,000 RPM – only approx. 1,370 operating hours For sale is a high-quality vertical high-speed machining center, a RÖDERS RFM 600 with RCE 1, manufactured in 2007. (An RFM 600 from 2003 is also available at the same location.) The machine is ideally suited for the highly precise machining of graphite, aluminum, non-ferrous metals, as well as hardened tool steels, and is used primarily in the tool, mold, and precision machinery industries. Technical data: Year of manufacture: 2007 Travel distances X/Y/Z: 600 / 450 / 300 mm Table: 700 x 550 mm RÖDERS CNC control HSK-40 spindle Spindle speed up to 42,000 RPM 20-position tool changer Max. workpiece weight 400 kg Machine weight approx. 6.5 t Equipment: RCE 1 rotary tool changer Dkjdpjzk Eu Sofx Albet Smoke extraction Well-maintained overall condition Only approx. 1,370 operating hours Ideal for tool and mold making, electrode manufacturing, graphite machining, precision milling, and HSC/high-speed cutting. The machine can be inspected under power after prior appointment. Location: Germany Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge but does not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2010, HEDELIUS C 50-1800 – Vertical CNC Machining Center – Year of Manufacture 2010 – HEIDENHAIN iTNC530 For sale is a high-quality vertical CNC machining center, the HEDELIUS C 50-1800, manufactured in Germany. This machine is ideally suited for tool and mold making, general mechanical engineering, as well as precise single-part and series production. The HEDELIUS impresses with its robust design, proven HEIDENHAIN control system, and large travel range, combined with a compact footprint. Technical Data Manufacturer: HEDELIUS Type: C 50-1800 Year of Manufacture: 2010 CNC Control: HEIDENHAIN iTNC 530 Travel (X/Y/Z): 1,800 x 510 x 480 mm Table Size: 2,100 x 510 mm Spindle Taper: SK 40 Spindle Speed: up to 8,000 rpm Tool Magazine: 20-position Max. Tool Length: 250 mm Max. Tool Diameter: 63 mm Distance Spindle – Table: 570 mm Machine Weight: approx. 5,500 kg Equipment HEIDENHAIN iTNC530 CNC control 20-position tool changer Coolant system CE marking Condition The machine is in overall good and well-maintained condition. The documented spindle operating time is approximately 9,800 hours. An inspection under power is possible by appointment. Location: Germany _____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty. Dksdjzk Etnopfx Albjt

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center – spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Travel in X: 2,500 mm Travel in Y: 620 mm Travel in Z: 500 mm Table surface area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Dkjdpfxjzc Rlho Albst Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system 4th axis: See photos (this was installed on this machine approximately 10 years ago and then stored. None of the current operators know how or if the device works.) Full enclosure Electronic handwheel Coolant system Work area lighting Chip tray The machine is in operation and can be inspected while powered on after prior arrangement. With an X-axis travel of 2,500 mm and a table surface area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in machine, tool, jig, and steel construction. The comparatively low spindle running hours of only 9,546 hours are particularly noteworthy. The Hedelius C60 stands for robust German engineering quality, high precision, and a durable design. Inspection is possible at any time in Bremen by appointment. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2006, x-travel 750 mm y-travel 600 mm z-travel 560 mm Control SIN840D pl table-size 950 x 650 mm workpiece weight max. 1.000 kg feed X/Y/Z/-axis 1 - 90.000 mm/min rapid traverse X/Y/Z 90,00 m/min spindle turning speed - stepless 1 - 18.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW tool taper HSK-A63 tool magazin: 30 tool diameter 80 mm tool diameter with 2 vacant positions 140 mm tool length - max. 300 mm weight of tools max. 10,00 kg total power requirement 58,00 kW Dedpfx Aovxwxielbekt weight of the machine ca. 11,00 t dimensions of the machine ca. 7,00 x 4,00 x H3,50 m Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA pallet system MTS500, tool breakage control, coolant-unit, coolant through the spindle (23 l/min at 40 bar), chip conveyor, electronic handwheel

Condition: excellent (used), Deckel Maho DMC 835V CNC machining center Year of manufacture: 2008 Dsdpfxszw Auvj Albjkt Control system: Siemens 840D with Shopmill Travel range X/Y/Z: 835 mm / 510 mm / 510 mm Spindle speed: 10,000 rpm Spindle power: 14 kW Table dimensions X/Y: 1000 mm / 560 mm Table load capacity: 800 kg max. Workpiece height: 720 mm Tool positions: 20 Tool holder: SK40 Weight: approx. 4500 kg Operating hours: 9521 h Chip conveyor Handwheel

Condition: used, Year of construction: 2002, Technical details: x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm tool change unit: 16 turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, known defect: control starts not 100% special price Dodpfoviwg Usx Albskt *

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm Dsdpfjzvf Sujx Albokt - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table load: 800 kg, rotational speed (max.): 10,000 rpm, Equipment: chip conveyor, Tool holder: SK 40 (DIN 69871) Number of positions: 30 tools Through-spindle coolant (IKZ) Dkedpfjy Nif Uox Albjt

Condition: used, Year of construction: 2018, Müga V13 vertical CNC machining center Vertical CNC machining center Müga Type / Model: V 13 Control: Mitsubishi M70 Condition: Used, showroom machine Year of construction: 2018 Technical data Travel (X/Y/Z): 1,300 x 700 x 650 mm Tool holder: SK 40 Double-arm tool changer: 24 ATC Max. spindle speed: 8,000 rpm Dkjdozva Aujpfx Albot Clamping area (table size): 1,500 mm x 660 mm Max. table load: 1,000 kg Inquiry item: Transportation costs will be provided in a separate quote.

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Djdpfjzwxz Eox Albskt Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, CNC Vertical Machining Center “BRIDGEPORT VMC 800” With Heidenhain TNC 410 path control Year of manufacture: 2000 Travel ranges: X 800 Y 500 Z 500 Spindle speed range: 0 – 10,000 rpm, stepless With the following accessories: Dkjdpfx Alsypb Rhobot Fixed angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 tool magazine slots (SK 40) Fully enclosed safety cabin with sliding doors and internal lighting Various SK 40 tool holders Electronic handwheel Coolant system with reinforced 20 bar pump Chip conveyor Operating manual