Used Juki/Herbert Meyer Mb-373/Rps-L 600 for sale (71,091)

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Lhjdpfx Aozkivtob Aen Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: used, Year of construction: 2011, functionality: fully functional, total length: 8,310 mm, total width: 1,641 mm, total height: 1,824 mm, overall weight: 2,100 kg, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 5.3 kW (7.21 HP), pressure: 1 bar, number of injections: 6, temperature: 300 °C, Title for MachineSeeker AFO Heat AFOGRILL-6B-600 industrial gas-fired infrared grill – 2011 Sales Description For sale: AFO Heat AFOGRILL-6B-600, an industrial gas-fired infrared grill for the continuous grilling, browning, and heating of food products. The machine is equipped with 6 infrared gas burners, each with a thermal output of 46 kW. The total installed thermal output is therefore 276 kW. This grill is suitable for industrial food production and can be used, among other things, for meat products, hamburgers, chicken products, kebabs, and similar products. Technical Specifications Manufacturer: AFO Heat NV Model/Type: AFOGRILL-6B-600 Year of Manufacture: 2011 Serial Number: K015 Number of Burners: 6 Thermal Output: 6 × 46 kW Total Thermal Output: 276 kW Electrical Power: 5.3 kW Supply Voltage: 3 × 400 V + N + PE Required Gas Pressure: 20 to 100 mbar Machine Weight: approximately 2,100 kg Lhedpszn Ht Djfx Ab Aon Construction: stainless steel CE Marking: present The AFOGRILL is designed for professional and industrial applications where uniform and powerful heat treatment is necessary. Thanks to the infrared gas technology, the product can be grilled quickly and given an attractive color and grill pattern. Dimensions, belt speed, capacity, type of gas used, and other information are available upon request. Short version AFO Heat AFOGRILL-6B-600 industrial infrared gas grill, year of manufacture 2011. Equipped with 6 burners, each with 46 kW, for a total thermal output of 276 kW. Electrical power 5.3 kW, connection 3 × 400 V + N + PE, gas pressure 20–100 mbar, and weight approximately 2,100 kg. Stainless steel construction with CE marking. Suitable for the continuous grilling and browning of meat, chicken, and other food products.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,379 h, load capacity: 5,000 kg, lifting height: 3,926 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, drive type: Elektro, Electric four-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2020 Lhedpfjzbd Dhox Ab Aon Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, joystick, LED.

Condition: used, Year of construction: 2014, operating hours: 1,656 h, lifting height: 3,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 Electric Forklift Truck, year of manufacture: 2014, operating hours: only 1,656 h, previous owner: German Armed Forces, rated capacity: 3,000 kg, lift height: 3,600 mm, fork length: 1,200 mm, fork extensions: 1,800 mm, integrated scale, side shift, duplex mast, full free lift, road lighting per STVZO, incl. charger, in good condition, immediately operational. Lhedpfeymv Susx Ab Aon On request, we will be happy to provide you with a leasing or financing offer. Mr. Mihm (phone) will be pleased to assist you. More information is available on our website. Subject to errors and prior sale. Power steering, cab. = More Information = Lifting capacity: 3,000 kg Overall height: 250 cm For further information, please contact Tobias Ebert.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Lhjdpfx Aboywzq So Aen Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: used, mileage: 217,983 km, power: 315 kW (428.28 HP), first registration: 04/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: Meiller three-way tipper * Bordmatik (automatic sidewall lowering) left * Dosing device at discharge chute * Lashing recesses in tipper floor * Right sidewall swinging and foldable Lhsdpeyv S A Nefx Ab Ajn * Front axle load 8.0 t * Work lights at rear of cab, mounted high * Roof access platform with handrail * Compressed air connector in cab * Aluminum air reservoir * Air horn * Cab: steel-sprung, comfort version * Suspension: front springs 8.0 t, 3-leaf * Rear lights: construction site version * Hydraulic pump (Meiller pump, 9-piston) * Info display 12.7 cm with additional readout * Cabin filter for construction vehicles * Aluminum tread plate fenders * Fuel tank: 320 L aluminum, left side * Light and rain sensor * Front air intake * Illuminated Mercedes star * Reinforced engine brake * Acoustic reverse warning (external signal) * Fleet management system interface * Circuit breaker * Cab seats: driver’s comfort air-sprung seat * Exterior sun visor * Sun roller blind for driver’s side window * Steel wheels 11.75x22.5 (on front axle) * Left external storage compartment * 24V / 25A socket in passenger footwell * Additional 24V socket in passenger footwell * Stone chip protection grille * Road paver package * Foldable rear underrun protection * CB radio preparation Additional features: * Emission standard EURO 6 C * ABS switchable * Axle configuration: 8x4/4 * Trailer coupling: Ringfeder towing hitch * Arocs * Audio system: radio with USB port * External mirrors electrically adjustable and heated * 170 Ah battery, batteries stacked vertically * Rear axle differential lock * Cabin width: 2.30 m * Cab: flexible step entry * Cab: hydraulic tilt system * Cab: M ClassicSpace * Cab floor with 170 mm engine tunnel * Suspension: leaf/leaf * Rear springs: 2x10 t, heavy-duty * Electric window lifters * Tinted windscreen * 12-speed gearbox - type: G 211-12, Power Shift * (AdBlue): 25 L * Rear axle crown wheel 390 * Pollen filter * Body/chassis: tipper, Meiller * Central locking, comfort system * 2-stage air compressor * Heated air dryer * Engine: 10.7 L – 315 kW inline 6-cylinder diesel (OM 470) * Engine compartment encapsulation * PTO MB 131-2c * Ramp mirror * Residual heat utilization * Fully protected disc brakes * Disc brakes front and rear * Servotwin power steering * Upholstery/cover: fabric * Cab seats: functional passenger seat * Rear axle stabilizer * Front axle stabilizer * Tachograph / EC control device * Toll collection preparation * Straight front axle * Regulated water pump * Permissible total weight 32,000 kg * Transmission oil cooler * Tyres front axle 385/65R22.5 14/14 mm * Tyres 2nd front axle 385/65R22.5 13/14 mm * Tyres 1st rear axle 315/80R22.5 8/8 and 8/8 mm * Tyres 2nd rear axle 18/19 and 17/17 mm * And much more. !!! Subject to errors, changes, and prior sale !!!

Condition: new, mileage: 450 km, power: 220 kW (299.12 HP), fuel type: diesel, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specifications available upon request. * Truck with Campana Safe 2020 body and matching Campana Safe through-loading trailer (body year 2019) * Fully galvanized steel structures, designed for the concealed transport of either 2 cars, 2 SUVs, or one panel van * Fixed front stacking platform and hydraulically lowerable rear platform with infinitely adjustable hydraulic supports Truck equipment: * Wheelbase: 4,760 mm * S-cab, Classic Space, extended * MB 121-2c PTO * Air suspension on front and rear axles * Front axle upgraded to 5.3 t Body (year 2019): * Plywood box body with roller shutter door at the rear * One double-wing side door (sandwich design) on each side, clear width approx. 2,500 mm, with internal locking rods and stainless steel handles * One-piece, smooth GRP roof, white, semi-transparent * Front wall made from 20 mm thick plywood * Side walls made from 20 mm thick plywood * Box body and cover panels painted RAL 3002 Carmine Red * Galvanized perforated steel catwalks on lower and upper loading levels, fitted with rubber strips above and below for splash protection (hole pattern compatible with KTT and Lohr wheel chocks; concealed holes by cross beams in overlapping areas approx. every 3 m) * Closed central lower platform made from hot-dip galvanized steel checker plate * Closed central upper platform made from 3.5-5 mm aluminum checker plate * Loading and drive-over ramps for short-coupling system * Undermounted cross member for quick-coupled trailer, painted in chassis color, with external operation Ledpfx Aoy N H Sxob Ajhn * Tow hitch with remote indicator for 12 t central axle trailer * 2 plastic toolboxes (W x H x D: 600 x 400 x 500 mm), lockable, with folding lid * Wheel chock recesses on the rear stacking platform, left and right, with 3 chocks per recess (removing chocks allows loaded vehicles to be lowered in height) * 1 pair of aluminum insert ramps with securing knob * Gear-type hydraulic pump * Cable winch Trailer equipment (year 2019): * 1 pair of 5.5 t Gigant low loader axles with maintenance-free compact bearings * WABCO EBS air brake system * WABCO electronic air suspension with control unit in truck cab (permits raising/lowering of trailer air suspension from cab) * 235/75 R 17.5 single tires * Plywood box body with hydraulic rear loading flap and front portal with roller shutter door * One double-wing side door per side, sandwich design, clear width approx. 2,500 mm * Additional single-leaf side door, front left, with internal locking rod and stainless steel handle * One-piece, smooth, GRP roof, white, semi-transparent * Side walls made from 20 mm thick plywood * T90 rear flap made from high-strength aluminum alloy, hydraulically lowerable, with aluminum perforated running boards left and right in wheel tracks * Box body and cover panels painted RAL 3002 Carmine Red * ProStripe LED interior lights, 6 pieces, each 1,220 mm long, fully wired, with switch in box body * Removable jack, pin-secured to drawbar * Galvanized perforated steel catwalks on lower and upper loading levels, with rubber strips above and below for splash protection (hole pattern compatible with KTT and Lohr wheel chocks; concealed holes

Condition: used, Year of construction: 2021, operating hours: 991 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 electric forklift, year of manufacture: 2021, hours: only 991h! Previous owner: German Armed Forces. Rated load capacity: 3,000 kg. Lift height: 4,600 mm. Fork length: 1,800 mm. Equipped with weighing system, side shifter, triplex mast, full free lift, and road-legal (StVZO) lighting. Including charger. In good condition and immediately operational. Ljdpfx Abjy Sd N Te Ajhn On request, we are happy to provide a leasing or financing quote. Mr. Ebert (tel. ...) will assist you personally. For more information, please visit our website. All information subject to change and prior sale. Power steering, overhead guard. = Further information = Lifting capacity: 3,000 kg Overall height: 220 cm Contact Tobias Ebert for further details.

Year of construction: 2018, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Deep bucket / bucket / MS21 / 600 mm / year of manufacture: 2018 / in stock & immediately available Price: €1,790.00 net / €2,130.10 gross - Cutting width (mm): 600 - Weight (kg): 550 - Capacity (m³): 0.430 Equipment: - Incl. MS21 mount We have a very large selection of different buckets in our warehouse, which are immediately available! Lodpfxoyi Abuj Ab Aohn Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 083270-F = Further information = New: No Intended use: Construction Unladen weight: 550 kg Please contact Marius Herden for further information.

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x pallet rack beam, used Material color: similar to red-violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Locking clip: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams: 3,380 kg, with evenly distributed load. (Observe bay load limits) The beams feature a diagonal brace mounting! On each the left and right side of the beam end a bracket is welded on the locking clip edge! (Depth 90 mm – L: 50x50x5 mm) 02x safety pins, used Design: fully galvanized For securing the cross beams Note: The beams remain fully functional despite the holes! The beams come from an SSI project with heat protection panels that, according to the manufacturer, were bolted on! Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Lhsdpfx Aboykqrdo Aon This item is only offered for collection. If transport or shipping is desired, this is subject to additional costs. Please inquire separately with us, specifying your delivery location and required quantity.

Year of construction: 2025, condition: new, Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-38)mm; power: 220V, 6.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1800xW1500xH1900mm; weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lsdpfxev Nmdps Ab Aohn

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,524 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,454 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Lhjdpfxewdk I Tj Ab Ajn Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Good Battery Voltage: 80V Battery Year of Manufacture: 2017 Description: Camera Sideshift, 3rd valve, 4th valve, heating, full cab, air conditioning,

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) Lhodpfx Aov T Uvzsb Aon There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 11,561 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,354 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Good Battery Voltage: 80V Sideshift, Lhsdewfvl Hspfx Ab Aon 3rd valve, 4th valve, heating, full cab, air conditioning,

Condition: new, Technical Data for the Base Plate: Lhsdex Ekbcopfx Ab Asn Racking System: SSI Schäfer Type: PR 600 Included in delivery: 01x Base plate, new Type designation: FT111 Suitable for frame profile width: 100 mm Material colour: RAL 5010 Gentian Blue Material thickness: approx. 6.00 mm Total width: 175 mm Total depth: 105 mm Number of mounting holes: 2 pcs Hole diameter: 13 mm Weight: approx. 1.06 kg | per unit Including the following fastening materials: 02x Hexagon head bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contacts at our company: Mr Andre Evering Mr Mario Klöver Mr Falk Deutsch General information about this item: This item is only available for collection. Any transportation or shipping beyond that is subject to additional costs, which can be individually requested from us depending on the delivery location and quantity.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,713 h, load capacity: 3,000 kg, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, construction height: 2,824 mm, drive type: Elektro, Electric 4-wheel forklift Ledpfx Ajx Hbq Dsb Aohn Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Price includes hydraulic fork positioner with side shift 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin,

Condition: new, INA K811/600-M axial roller cage SN:M71, outer dimension 70.5 cm, inner dimension 60.5 cm, unused in opened original packaging, 100% functional, delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Lhjdpex Dw Ecsfx Ab Aon

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,583 h, load capacity: 4,000 kg, lifting height: 3,446 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: Good Front tyres type: Superelastic Front tyres condition: 20 - 40% Rear tyres type: Superelastic Lhjdpfx Abow Tfqgj Asn Rear tyres condition: 20 - 40% Battery voltage: 80V Battery type: PzS Battery year: 2018 Description: Vehicle will undergo a UVV safety inspection. Machine will receive a service and be cleaned prior to delivery. Painting available at extra cost on request. Sideshift, 3rd valve, 4th valve, front work lights, heater, road approval (STVZO), full cabin,

Condition: new, Year of construction: 2025, functionality: fully functional, throat depth: 600 mm, sheet thickness steel (max.): 5 mm, sheet thickness copper (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, For sale JURADO ALS 600 device. A device for connecting steel, aluminum, copper sheets, up to 5 mm total thickness using the clinching technology. The maximum throat depth is 600 mm. The distance between the punch and the die: 8 mm Ledpfx Abovncfgs Ashn A device in hydraulic-pneumatic technology.

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Lhedpevyp Avofx Ab Aen Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x700x500 mm Weight 120 kg Ledpfx Asvz E H Hsb Aehn Total power requirement 0,25 kw

Condition: good (used), total width: 400 mm, total height: 285 mm, total length: 600 mm, Folding crate 285 red - second-hand Manufacturer Bekuplast Color: Red Material: Polypropylene External dimensions: approx. 600x400x285 mm (LxWxH) Internal dimensions: approx. 555x360x272 mm (LxWxH) Height when folded: 65 mm Stacking height: 55 mm Handles: Front open / long side closed Weight: 2.93 kg per piece Base with ribbed honeycomb structure Water drainage holes on the base Lhsdpevcnfzsfx Ab Aon Use: - Foldable to save space - Storage of various small parts in a small space - Stackable - Recessed grips for easy removal - Simple unlocking mechanism at the front These are used boxes. There are soiling, scratches etc. present. The function is not impaired.

Condition: good (used), total width: 400 mm, total height: 285 mm, total length: 600 mm, 100 x folding crate used Manufacturer Bekuplast Color: Red Material: Polypropylene Outer dimensions: approx. 600x400x285 mm (LxWxH) Internal dimensions: approx. 555x360x272 mm (LxWxH) Quantity: to choose from Height folded: 65 mm Stack height: 55 mm Handles: Front side open / long side closed Weight: 2.93 kg per piece Base with ribbed honeycomb structure Lhsdpovcpc Ijfx Ab Aon Water drainage holes on the base

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 12,652 h, load capacity: 3,000 kg, lifting height: 5,450 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 4,000 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Front tires type: super elastic Front tires condition: 40 - 60% Lsdjvll Urjpfx Ab Aohn Rear tires type: super elastic Rear tires condition: 20 - 40% Description: The vehicle is UVV-tested. Before delivery, the machine is serviced and cleaned. On request, the machine can be painted for an additional charge. Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 7,258 h, load capacity: 3,000 kg, lifting height: 3,195 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Lhodpfouncmgex Ab Aon Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Front tires Type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Battery Volt: 80V Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. Rotator, sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights,