Used Hyster Rs46-41Xd/67S for sale (834)

Condition: used, functionality: fully functional, power: 49.28 kW (67.00 HP), first registration: 10/2013, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Dwsdpjzdizvsfx Al Ajc Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Dwedpfxozdkc Uj Al Asc Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Dwjdpfxszfbu Rs Al Aoc Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, mileage: 274,000 km, power: 93 kW (126.44 HP), first registration: 02/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 3,230 mm, loading space width: 1,910 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, 3-seater, 6-speed manual transmission, tachometer, power steering, electric windows, on-board computer, electric exterior mirrors, center armrest, twin tires, cruise control, air conditioning, rear wing doors, side door/right, Carrier Xarios 350 refrigeration unit, side protection, 3-pole power connection, stationary and en-route cooling, D-Hollandia tail lift with 750 kg payload, etc. Errors and prior sale excepted. For sale only to commercial businesses and for export. Test drive/inspection at TÜV Dekra or Iveco is possible!!!!! NEW TÜV available upon request!!!!! All documents can be sent in advance by email or WhatsApp to check mileage, accident history, vehicle history, etc.!!!!! WhatsApp!!!!! !!!! Fg-6676 !!!! Key number 67!!!!! Dwodpjz E Aafsfx Al Ajc

Condition: new, functionality: fully functional, New unit Enmair Electropneumatic core puller ER Immediately available from stock ER series, Type 650 Application range from 5 to up to 150 to (depending on the design) – injection molding machine Horizontal travel: 650 mm Vertical travel: 125 mm Dwjdpfer A D Itex Al Aec Swivel angle: 5 degrees Gripper angle: [value missing in original text] Lifting weight: approx. 3 kg A bracket on the rear allows for easy adjustment of the swivel angle to the right or left, as needed. Required operating air pressure: 5 - 7 bar 220 V, 50 Hz Depending on the pre-existing equipment on the injection molding machine, the unit can be offered with an Euromap 12 or Euromap 67 connector. Operating interface: English, Dutch

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Dedpfx Aezwmlrsl Ajwc Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Year of construction: 2007, condition: good (used), Rational combi steamer CM 202 For 40 trays 1/1 GN or 20 trays 2/1 GN 67 kW Dedpfxsx N Ucrj Al Aewc

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Dwodsyuvcijpfx Al Aec Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: excellent (used), Year of construction: 2014, SEPRO SR SUCCESS 7 S3 TRANS Visual 2 (2014) Dwsdszw Efdopfx Al Aoc Linear cartesian robot Euromap 67 Number of axis: 3 Reach: 1000 mm Payload: 3 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed Dodpfxezzn Hls Al Ajwc · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Clamping force: 160T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Dedpfx Aozz Spdsl Aowc Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Dosing signal interface with HAN-3A connector KEBA 1000 1 set with 6 glass flow meters EU67

Condition: used, Behringer HBP 650/800 Line is fitted with full automatic loading and unloading tables. Band dimensions: 10.000 x 67 x 1,6 mm Single cut: - Round: 800 mm - Rectangular: 800 x 780 mm - Flat: 1000 x 750 mm Minimal: Dedeyma Igjpfx Al Aewc - Round: 50 mm - Rectangular: 50 x 20 mm Band dimension: 10.000 x 67 x 1,6 mm Single cut : Round: 800 mm Single cut : Rectangular: 800 x 780 mm Single cut : Flat: 1.000 x 750 mm Minimal : Round: 50 mm Minimal : Rectangular: 50 x 20 mm

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. Dodpfx Alofg E Hpj Ajwc • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, overall weight: 36,000 kg, next inspection (TÜV): 09/2026, loading space length: 13,830 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Curtain Master MEGA White aluminum Dimensions and Weights Overall length 13830 mm Platform inner length 13620 mm Overall width 2550 mm Platform inner width 2480 mm Inner width between posts 2480 mm Inner width between longitudinal beams (without lifting roof) 2480 mm Lateral loading height with lifting roof and inner height 2850, 2785 mm Axle distance 1310 mm Saddle height 950 mm Kingpin height 80 mm Platform height 1030 mm Distance from kingpin to 1st axle 6390 mm Number of Euro pallets 34 pcs Technically permissible gross weight (administrative) 36000 kg Technically permissible gross weight 42000 kg Technically permissible axle load (administrative) 8000 kg Technically permissible axle load 9000 kg Technically permissible saddle load 15000 kg Manufacturer designation NS3K nd Accuracy +/- 4% nd Unladen weight 6560 kg TECHNICAL DATA Chassis Lamp bracket made of steel 371 mm Pallet stop with lashing eyes Wielton side impact protection, white solid filling Rear underrun protection, fixed Steel rear underrun protection Floor made of screen-printed plywood, 30 mm, load capacity 7.5 tons Perimeter frame with continuous lashing points for securing the load, SAFETY LOCK system, 50 to 67 per side depending on the model Steel buffer at the rear Axes and Suspension Number of axles 3 Rigid axles Saddle height 950 BPW disc axles 3x 9000 kg, 19.5 ECO PLUS, 3 clamps, BPW, ET=120 1st lift axle Dwodpfszx Iqrjx Al Asc Support legs 2-speed geared support legs, full load (BPW Gen2 FL/SAF Hercules) Fenders PVC fenders, shell, 2 front, 6 rear Rims 6x steel rim 19.5-14 ET-120 Tires 6x ALL-ROAD Premium tires 445/45/R19.5 (Goodyear) Other chassis equipment Two wedges with mounting Customs rope/tarpaulin rope on the front wall (no customs seal) 1 extendable rear ladder 2 identification plates on the rear panel 565x200 ECE-R70 Body Inner height 2950 Insert strips - 4 rows 1st row, aluminum overlay strips, H=100 mm, 8 pcs Sliding roof Edscha HYBRYD (0, +50, +100, +150) and 450 for loading, roof can be moved forward and backward independently of the side tarpaulins Side tarpaulins with 24 tarpaulin tensioners Aluminum front wall Front wall impact protection (metal plate) H=1500 mm 2nd row, aluminum overlay strips, H=100 mm, 8 pcs 3rd row, aluminum overlay strips, H=100 mm, 8 pcs 4th row, aluminum overlay strips, H=100 mm, 8 pcs Tarpaulin quick tensioner at the front Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Tarpaulin tensioner with additional locking mechanism Sliding tarpaulin that can be opened on both sides EDSCHA HYBRID Rear wall as an aluminum double-wing door Braking system/pneumatics Braking system Wabco with Basic Modulator with RSS/RSP Steel air reservoir Chassis painting Chassis painting RAL 7021 (black gray) KTL coating Tarpaulin color Side tarpaulin color Polplan 018 RAL 9006 (silver) Electrical system 2x7-pole + 1x15-pole with EBS connection, without connection cables to the central unit Lighting LED Aspöck-EUROPOINT III with flashing side marker lights Additional systems The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Version DC 9.5 design Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Designation in German Certificates/Homologation Certificate f

Year of construction: 1993, condition: used, functionality: fully functional, APV Rosista DELTA D2 Valve Manifold – 199 Double-Seat Valves Manufacturer: APV Rosista Model: DELTA D2 Valve Manifold Year of Manufacture: approx. 1993 Condition: used Application: Dairy Industry / Food Processing Total number of valves: 266 pcs. Double-seat valves: 199 pcs. Nominal sizes: DN65 / DN100 Composition of the valve manifold: - 84 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN100 - 115 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN65 - 67 pcs. pneumatically actuated APV shut-off valves - 4 pcs. Endress+Hauser Promag P magnetic-inductive flow meters - 4 pcs. Fischer & Porter flow meters - 7 pcs. APV centrifugal pumps - extensive stainless steel piping - pneumatic actuation of the valves - valve controls / pneumatic connections - complete stainless steel substructure In total, the valve manifold has 266 pneumatically actuated APV valves, including 199 APV DELTA D2 double-seat valves. Dwjdpfxjz Ib T Ae Al Ajc

Condition: as good as new (ex-display), Year of construction: 2024, pressure (max.): 13 bar, CSA 15/13 SCREW COMPRESSOR, NO. 1,000 Dwodpfx Aez Duc Nsl Ajc MOUNTED ON 500-LITER TANK WITH DRYER AND FILTERS 11 kW, 15 HP MAXIMUM PRESSURE: 13 BAR 400V/50Hz/3-PHASE FLOW RATE: 1147 L/min NOISE LEVEL: 67 dB(A) DIMENSIONS: 1540x665x1535 mm, WEIGHT: 450 kg Attached: User and maintenance manual CE declaration of conformity

Condition: new, Baumüller DSG 100-K servo motor, serial number: 20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Dsdoi D E Dvepfx Al Aewc

Condition: used, Year of construction: 2016, Fatting cabinet WP Riehle Line 2000 A, size 36 Year of manufacture: 2016 Condition: cleaned & inspected Fermentation chamber with integrated 2-liter water tank Includes fermentation trolley with 10 tilting trays Reversing basket and tilting trays, 6 rows Internal dimensions of the trays (W x D x H): approx. 67 x 73 x 11 cm Filling capacity: 34 liters / 31 kg Heating: 6 kW Benefits: Airtight WP RIEHLE volume lid for larger dough volumes with the same initial weight Longer fat life due to pulsed heating Lowest energy consumption and consistent temperature due to direct heating in the oil Dsdpfxoz A Srfs Al Aewc Minimum fat absorption due to consistent temperature, even when turning Computer control with 10 baking programs for consistent quality Automatic mode provides free working time during the baking process.

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Dwodpsxyk Snofx Al Aoc

Condition: good (used), mileage: 167,859 km, power: 84 kW (114.21 HP), first registration: 02/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 7,450 mm, total width: 2,020 mm, total height: 2,750 mm, loading space length: 4,730 mm, loading space width: 1,770 mm, loading space height: 1,960 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 807 kg, Unladen weight: 2393 kg, Gross vehicle weight: 3200 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Auxiliary heater, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 84 kW (113 hp), Number of cylinders: 4, Engine displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Side panel cladding, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, XXL L4 ac aut EURO6 carplay cruisecontrol sprung seat camera, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: VNP-67-Z Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Dwedezddxdjpfx Al Ajc Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 1 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Weights Unladen weight: 2,393 kg Payload: 807 kg GVW: 3,200 kg Functional Loading platform height: 68 cm Maintenance APK (Technical Inspection): Valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial Information Leasing price: €433 per month (delivery van, 72 months); Ask for further information and conditions.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 84 mm, clearance between the columns: 910 mm, displacement volume: 2,050 cm³, injection pressure: 1,620 bar, injection weight: 1,886 g, mold height (min.): 350 mm, ejector force: 110 N, ejector stroke: 250 mm, plate width: 1,260 mm, plate height: 1,270 mm, total length: 7,200 mm, total width: 2,150 mm, total height: 2,230 mm, overall weight: 17,210 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 183 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN500D1-3330 D=84 Clamping force 500T Tie bar spacing 910x830 Tool installation height 350 to 900 Robot interfaces Euromap 67, Euromap 13 Suitable robot available upon request Basic standard equipment: • CE standard • KEBA-3018 control system • Thermal insulation cover for the cylinder • Energy meter, intelligent version Dwjdpfxez I T E Dj Al Aoc • 2 sets of core pull • 1 set of air blow device on the moving platen • 1 set of air blow device on the stationary platen • EUROMAP-67 interface • IT system • EUROMAP-13 core pull interface on the stationary platen • EUROMAP-13 core pull interface on the moving platen • 1 set of 6-way water distributor for the moving platen (11 l/min) • 1 set of 6-way water distributor for the stationary platen (11 l/min)

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Dsdpfsx Exmtsx Al Aswc Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Dwodpfxjz Ipwps Al Aoc Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 128-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 cc Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Dwodpsz Ipw Ajfx Al Aoc Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 1200T 1000-290 / Vertical machine with a rotary table Year of manufacture: 05.2012 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Dsdpfx Aloz Ipx To Ajwc Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical machine with a rotary table Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 2 Control with hot runner system x 18 Injection unit hardened - bimetal Servo motor on the injection unit – fast suction and fast injection Proportional valve on the injection unit – precise injection Self-closing nozzle Primus sensor - tool pressure control Rotary table diameter: 1200 mm Dimensions: Weight: 7200 kg Length/Width/Height: 4.36x1.71x3.66 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request