Used Hydraulic Press 160 To for sale (39,539)

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Godpfx Aez Hwhmjkyjkc Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: used, Year of construction: 1990, pressure 150 t distance between table / ram 660 mm table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press - hole in table Ø 120 mm Gksdpfx Akjy Erv Isyjc

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER PRESSURE: 5 x 80 tons TABLE DIMENSIONS: 800 x 560 mm Gksdpfxjz A Aw Eo Akyoc STROKE LENGTH: 500 mm

Condition: good (used), Year of construction: 1978, Pressure: 250 t Throat depth: 360 mm Gjdsz Iyy Iopfx Akyjkc Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery Gjdpfxsdntc Nj Akyokc OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m Gedju Nfv Uspfx Akyskc The machine is equipped for straightening work. *

Condition: good (used), Year of construction: 1993, functionality: fully functional, Hand insertion safety – Pressing force up to 100 kN Throat depth: 210 mm Gkodpfxsz Hpcvo Akyjc Table size (W x D): approx. 500 x 400 mm Installation height with/without clamping plate: 300 mm Stroke: 100 mm Total power: 2.5 kW Weight: approx. 2.5 t Oil fill: approx. 150 l Required space (W x D x H): approx. 0.95 x 1.5 x 1.95 m Equipment and delivery scope: Switch-over between travel / pressure Pressure control valve with gauge display Adjustable dwell time Documentation

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, reverse speed: 25 mm/s, total length: 1,400 mm, total width: 900 mm, total height: 2,150 mm, SPECIAL OFFER – 5% DISCOUNT! MTP C-FRAME HYDRAULIC PRESS – 1000 KN / 102 T Professional MTP hydraulic press with a pressing force of 1000 kN (approx. 102 t), designed for demanding industrial operations such as pressing, straightening, bending, assembly and forming of metal components. The open C-frame design provides excellent access to the working area and facilitates easy positioning of workpieces. The robust welded steel construction ensures high rigidity, stability and durability during operation. The hydraulic system provides smooth and precise ram movement. The machine is suitable for manufacturing plants, metalworking workshops, tool rooms, maintenance departments and the automotive industry. KEY FEATURES: Gjdpfx Akjyrr Rkeyokc • Pressing force: 1000 kN (approx. 102 t) • Open C-frame construction • Robust welded steel frame • Hydraulic drive system • Smooth ram operation • Large and easily accessible working area • Designed for industrial applications • Brand new machine • CE compliant TECHNICAL DATA: • Pressing force: 1000 kN (approx. 102 t) • Maximum working pressure: 25 MPa • Maximum opening: 600 mm • Ram stroke: 300 mm • Working table dimensions: 700 × 500 mm • Throat depth: 250 mm • Downward speed: 11 mm/s • Return speed: 25 mm/s • Motor power: 5.5 kW • Machine dimensions (L × W × H): 1400 × 900 × 2150 mm • Machine weight: 2200 kg APPLICATIONS: • Pressing and fitting operations • Straightening • Bending of metal components • Assembly work • Metal forming • Tool room and workshop operations • Industrial production • Maintenance operations TRANSPORT & WARRANTY The machine is brand new and covered by a 12-month warranty. We provide spare parts, warranty service and professional after-sales support. We can arrange professional transport throughout Europe using experienced industrial machinery carriers. The machine is properly secured for transport and can be delivered directly to the customer's specified address. We can also arrange international transport and shipment to countries outside the European Union. METAL TECHNICS POLSKA Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We provide technical advice, spare parts and comprehensive after-sales support. Contact us for the current price, machine availability, transport costs or an individual commercial offer.

Condition: used, functionality: unexamined, Hydraulic workshop press in a single-column design (C-frame). Hydraulic cylinder located at the top with a pressure gauge on the press head, and a robust clamping table mounted on a stand. Folding perforated sheet metal safety guards on both sides, control panel on a support column with emergency stop. Residual travel: 1 mm, residual travel time: 49 ms, safety clearance: 98 mm. Gkedpfx Asz A Unijkyjc Location: Homburg (Saar), Germany. Inspection possible by appointment. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: excellent (used), Year of construction: 2004, SCHULER HYDRAP Year of manufacture: 2004 Press force: 10,000 kN Stroke length max.: 1,650 mm Installation height: 2,400 mm Gjdpfx Aez Ei A Tjkyekc Closing speed: 420 mm/s Working speed max.: 68 mm/s Working speed at rated force: 21 mm/s Tool base area max.: 3,900 x 2,400 mm Tool base area min.: 1,800 x 1,200 mm Tool installation height: 750 mm Tool weight max.: 50,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection Gjdpfszp Ex Ujx Akyjkc - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard Godpfxou Nfm To Akyokc - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Stroke: 2,000 mm Clamping area: 4,900 x 2,500 mm Max. tool weight: 50,000 kg Approach speed: 300 mm/s Gkedpjz A Tvxsfx Akysc Working speed: max. 60 mm/s - min. 6 mm/s Weight without tool: 225,000 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 027-006-20, Offer 26244 Technical data: - Max. pressing force 63 t - Max. ram stroke 500 mm - Stroke speed 200 mm/sec Gkjdpfjz A Axvsx Akyoc - Return speed 400 m/min - Installation height 800 mm - Overhang to center of ram 360 mm - Ram clamping surface 530 x 460 mm - Ram clamping pin 40 mm - Table size 750 x 560 mm - Table bore / through hole 180 mm - Table height above floor 700 mm - Oil capacity (approx.) 300 l - Drive 380 V / 11 kW - Space requirement (approx.) W 1150 x H 3100 x D 1750 mm - Weight (approx.) 4300 kg

Condition: used, Year of construction: 1975, Press force: 200 t Stroke: 600 mm Frame width: 1910 mm Side frame opening: 1000 mm Shut height (stroke up): 800 mm Table area: 1900 x 1150 mm Cushion force in table: 80 t Cushion stroke in table: 300 mm Cushion area in table: 1500 x 950 mm Table height above floor: 800 mm Godjzynf Ejpfx Akyjkc

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm Gkjdpjvc Awxefx Akyoc ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 2012, machine/vehicle number: 7363126525, Item No. 26261 Hydraulic CNC Press Brake Technical data: - Pressing force 320 t - Working width 3050 mm - Distance between uprights 2550 mm - Overhang 460 mm - Installation height approx. 630 mm - Ram stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - Including: - Pivoting arm – control panel with control system CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge Gedpfx Ajzzzcmokyjkc - Motorized crowning - Safety light curtain - Electric foot pedal - 4-way universal die, split - V-dies - Split top tool set, various other tools

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW Gsdpfx Aju Nfudjkyjkc weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: good (used), Year of construction: 2007, Machine is in good condition. Gsdjz N Dgvspfx Akyekc

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN Gkedpfeup Skwex Akyoc ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm tank capacity 31 l Gksdpfx Akovu E T Hoyoc daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder.

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t Gedpfx Aeu Nfmaokyskc distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Shut height (stroke up): 830 mm Table area: 620 x 520 mm Table opening: 150 mm Table height above floor: 600 mm Ram area: 150 mm Downstroke speed: 120 mm/s Gkjdpezypmwofx Akyoc Upstroke speed: 30 - 450 mm/s

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Gkedpfx Akspvk Dioyjc Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: used, Year of construction: 1981, USED ALUMINIUM PROFILE PRODUCTION LINE GENERAL INFORMATION Equipment: Aluminium Extrusion Press Manufacturer: Youngstown (USA) Press Capacity: 1,650 Metric Tons Press Type: Horizontal Hydraulic, Direct Extrusion Year: Unknown (1980s) Refurbished: 1999 Condition: Under Power Availability: Immediate 1. INDUCTION HEATING SYSTEM - Make: Local - Control: PLC (LS Master-K80) - Built in: 1999 - Rated Power: 200 kW - Loader included 2. EXTRUSION PRESS - Rated Extrusion Force: 1,650 Tons - Main Ram Stroke: 1,200 mm - Maximum Extrusion Speed: 15 mm/sec - Maximum Extrusion Pressure: 20–25 MPa Control System - PLC System: LS XGK - HMI: Touch Screen Operator Panel - Control Modes: Manual / Semi-Automatic / Automatic - Process Control: Extrusion Pressure & Speed Control Hydraulic System - Main Working Pressure: 20–25 MPa - Main Motor Power: 2 × 132 kW - Hydraulic Pumps: 2 × Kawasaki LZ-500-110R1 (600 L/min) - Oil Tank Capacity: 8,000 Liters - Oil Cooling Pump: 120 L/min Billet & Container - Container Cylinder: Ø203.2 mm - Container Heating: Induction - Billet Diameter: 150 mm - Billet Length: 550 mm Die & Tooling - Maximum Die Diameter: 230 mm - Die Change System: Manual - Die Heater 3. RUN-OUT TABLE - Length: 40 m - Cooling: Water / Air - Profile Support Rollers 4. PULLER - Speed synchronized with extrusion - Hydraulic gripping system 5. SHEAR - Cylinder: Ø155 mm - Stroke: 571.5 mm Gsdozy H Rmepfx Akyjkc 6. COOLING BED - Length: 40 m 7. STRETCHER - Capacity: 25 Tons - Length: 30 m 8. CUTTING SAW 9. PACKING SYSTEM - Profile Stacking - Bundle Tying FLOOR SPACE 20 × 60 m