Used Horvath Fischer Spannfutter for sale (220)

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 450 mm z-travel 300 mm CNC-control Roeders RMS6 table-size 700 x 550 mm max. table load 800 kg Fpedpfjfff Rfex Alqeg spindle turning speed range 42.000 U/min feed stepless 0 - 30.000 mm/min rapid traverse 30 m/min drive capacity - spindle motor 14 kW tool change unit Pick-up 18 Pos. voltage 400 V total power requirement 20 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system

Condition: used, functionality: fully functional, machine/vehicle number: FN503832, Year of construction: 2016, operating hours: 1,974 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, fork length: 2,400 mm, drive type: Treibgas, Heavy-duty forklift truck – LPG Chassis number: FN503832 Load centre: 500 mm Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Very good Front tyres type: Solid rubber Fpsdpfx Ajwzdraolqog Front tyres condition: 80–100% Rear tyres type: Solid rubber Rear tyres condition: 80–100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, Tyres: white, non-marking

Condition: used, mileage: 654,000 km, power: 265 kW (360.30 HP), first registration: 02/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGA 26.360 | TANKER TRUCK, STEERING & LIFT AXLE, ALLOY WHEELS, TOP & BOTTOM LOADING VEHICLE HISTORY - VIDEO AVAILABLE UPON REQUEST - FROM FIRST OWNER VEHICLE EQUIPMENT - AUTOMATIC TRANSMISSION - ENGINE BRAKE - CRUISE CONTROL - STEERING AXLE - LIFT AXLE - AIR CONDITIONING - REFRIGERATOR - REVERSING CAMERA - ALLOY WHEELS - TRAILER COUPLING - TOOLBOX - FRONT AXLE WITH LEAF SPRING SUSPENSION - REAR AXLE WITH AIR SUSPENSION - SINGLE TANK TANK BODY - LINDNER & FISCHER TANK BODY - YEAR OF MANUFACTURE: 2010 - 3 COMPARTMENTS COMPARTMENT 1: 7,500 LITERS COMPARTMENT 2: 5,600 LITERS COMPARTMENT 3: 7,500 LITERS - TOP AND BOTTOM LOADING POSSIBLE Fodpfsytztdjx Alqspg FURTHER DETAILS - TYRE SIZE: 315/80 R22.5 - TYRE SIZE 1ST TO 3RD AXLE: 315/80 R22.5 - GOOD TYRES - IMMEDIATELY AVAILABLE - READY FOR IMMEDIATE USE EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT (MINIMUM €500 - €2,000) FOR SALES WITHIN THE EU & THIRD COUNTRIES, A DEPOSIT OF AT LEAST €500 / €1,000 IS REQUIRED. EXPORT REGISTRATION (EXW) POSSIBLE IN 10 MINUTES (APPROVED EXPORTER). 5-DAY, 15-DAY, 30-DAY LICENCE PLATES AS WELL AS 15-DAY AUSTRIAN LICENCE PLATES AVAILABLE. PLEASE MAKE VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGE, ERROR, AND PRIOR SALE. LEGAL NOTICE: THIS SALES ADVERTISEMENT DOES NOT CONSTITUTE AN OFFER WITHIN THE MEANING OF §145 BGB. ALL INFORMATION PROVIDED WITHOUT GUARANTEE OR WARRANTY OF SPECIFIC CHARACTERISTICS.

Condition: used, mileage: 185,141 km, power: 412 kW (560.16 HP), first registration: 10/2023, fuel type: diesel, empty load weight: 8,757 kg, maximum load weight: 10,168 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel consumption (urban): 612 l/100km, color: white, driver cabin: other, gearing type: automatic, suspension: air, total length: 6,120 mm, Year of construction: 2023, number of seats: 2, lifting height: 3,800 mm, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Color: white, unladen weight: 8,757 kg, permissible total weight: 18,000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, black leather seats, interior color gray, air suspension, retarder, fifth wheel: FISCHER SK-S36.20W 2/150, -710 mm, electronic braking system (EBS), electronic stability program (ESP), automatic climate control, stationary air conditioning, adaptive cruise control (ACC), LED headlights, headlight cleaning system, automatic driving lights, headlight range control, Bluetooth hands-free preparation, rain sensor, adjustable steering column, sunroof, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, electrically adjustable curb mirror, wide angle mirror, immobilizer, wind deflector, axle load indicator, Hill Start Assist, LED daytime running lights, 1x15-pin connector, sailing function, cornering light, telematics system, side paneling, EGR, SCR, non-binding offer, errors and prior sale reserved. The illustration may not correspond to the offer. Fpodjy Az Hkjpfx Alqsg

Condition: used, mileage: 78,020 km, power: 338 kW (459.55 HP), first registration: 09/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, color: violet, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, soot filter, STRALIS 460 Tanker Truck 6x2 Suspension: Leaf-air Wheelbase: 4.20 m Payload: 15,390 kg Suitable for Diesel & Petrol LINDER & FISCHER Fahrzeugbau GmbH Manufacturer No.: 66 6684 1st Tank: 7,650 liters 2nd Tank: 5,450 liters 3rd Tank: 7,850 liters 4th Tank: 70 liters 5th Tank: 70 liters Total Capacity: 21,090 liters Features: - Engine brake - Digital tachograph - Seat heating & ventilation - 1x Bed - Radio-media-telephone system - Lift and steering axle Fsdpfx Asyr T Ukjlqjpg - Electric windows - Sunroof - Sun visor - Lane departure warning system - Hill start assist - Trailer coupling (2x air-ABS-power) We are also happy to assist you with financing/leasing through our partners. All information provided without liability. Subject to errors and prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 5,500 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 2,200 mm, fuel type: gas, construction height: 2,650 mm, motor manufacturer: VW, gearing type: hydrostat, fork carriage width: 2,400 mm, fork length: 1,200 mm, tire condition: 75 %, empty load weight: 4,900 kg, Equipment: UVV, adjustable boom, fork extension, lighting, retractable fork, Ready-to-use device with new UVV and gas inspection, hydraulic push-off forks, lighting. Fpedpfxjy Ahqio Alqjg

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 2,818 h, load capacity: 2,500 kg, lifting height: 3,290 mm, load center: 500 mm, fuel type: gas, mast type: duplex, construction height: 2,300 mm, power: 38 kW (51.67 HP), motor manufacturer: Mazda, gearing type: automatic, fork length: 120 mm, tire condition: 75 %, empty load weight: 4,040 kg, immediately ready for use with sideshift, overhauled gas system, new lighting, new UVV and gas inspection, new seat cushion, SE tyres Fpedjy Afr Depfx Alqeg

Condition: used, mileage: 754,353 km, power: 331 kW (450.03 HP), first registration: 09/2015, fuel type: diesel, empty load weight: 7,737 kg, maximum load weight: 11,263 kg, overall weight: 18,000 kg, tire size: 315/60 R22,5, axle configuration: 4x2, wheelbase: 3,550 mm, next inspection (TÜV): 10/2026, fuel consumption (urban): 580 l/100km, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 5,805 mm, Year of construction: 2015, number of seats: 2, lifting height: 3,500 mm, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Color: Black Ebony, Unladen weight: 7737 kg, Permissible total weight: 18,000 kg, Tire size: 315/60 R22.5, 1st axle: , 2nd axle: , Seats: Woven fabric, Interior color: gray, Air suspension, Retarder, Digital tachograph, Fifth wheel coupling: FISCHER SK-S36.20 2/150, 510 mm, Electronic braking system (EBS), Electronic stability program (ESP), Automatic climate control, Adaptive cruise control (ACC), H7 headlights, Radio/CD, Adjustable steering column, Roof hatch, Fog lights, Kerb mirror, Wide-angle mirror, Immobilizer, Wind deflector, Axle load display, Hill start assist, LED daytime running lights, 1x15 pin connector, Sailing function, Telematics system, SCR, Non-binding offer, subject to errors and prior sale. Image may not correspond to the offer. Fjdeygnxtopfx Alqopg

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Standard workpiece headstock MK5 with adapter flange DIN 55027, size 5 - Splash guard hood for the above - Tailstock with fine adjustment, MK4 - Internal grinding attachment with protective cover for grinding spindle D:80 mm for belt-driven spindles - FISCHER internal grinding spindle type HJN 842, incl. grinding mandrels (4 pieces, choice) - HJNZ 42 collet chuck - Oil mist lubricator for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axes - Sine bar on the workpiece headstock incl. alignment arbor MK5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet attachment for Schaublin collets B32 - Set of B32 collets, D: 1.0–30.0 mm, increment 0.5 mm (59 pieces) - Dial indicator stop for table swivel with indicator 0.01 mm - Table fixed stop Fpedpfx Aljyf E Sueqjg - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic table load relief - Swiveling dressing device for external, face, or internal grinding operations - Set of vibration damping pads - New three-color paint finish (light grey RAL 7035 / blue RAL 5012 / dark grey RAL 7016) - New acceptance protocol according to KELLENBERGER standard - Documentation - CE conformity The machine is currently being overhauled, sample photos shown!

Year of construction: 1976, condition: used, machine/vehicle number: 40 127 76, span the range of around: mit Spannfutter 115/48 (not available) 3 - 42 mm this maximum clamping: 345 mm span the range of around: mit Spannfutter 115/56 (not available) 5 - 50 mm this maximum clamping: 95 mm cutterhead speed: (RM 4) 740 - 1700/(ME 4) 580 - 1160 Upm spindle drive: 3 kW hydraulic drive: 4 kW space: Maschine 2100 x 1380 x 1880 mm weight: ca. 2000 kg Fode Sxnpepfx Alqspg

Condition: used, functionality: fully functional, machine/vehicle number: FN615268, Year of construction: 2020, operating hours: 2,469 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN615268 Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Solid rubber Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: JH Battery type: PzS Battery year: 2023 Fodpfxsw H Eiqs Alqspg Battery condition: 80 - 100% Side shifter, integrated lateral lift, front work lights, overhead guard, front windscreen, STVZO, full free lift,

Condition: used, mileage: 92,000 km, power: 70 kW (95.17 HP), first registration: 01/2019, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 02/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,999 mm, total width: 1,956 mm, total height: 1,971 mm, loading space length: 2,520 mm, loading space height: 1,340 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Opel Vivaro Panel Van 1.6 L - 70 kW with Shelf System, ideally equipped for trades and commerce, e.g. as a workshop or service vehicle ++ At 91,944 km, the engine (replacement engine) was installed by an official Opel dealer. At the same time, the following parts were replaced or new parts installed: Clutch kit with dual-mass flywheel, battery, water pump kit, turbocharger, engine oil, transmission oil, clutch slave cylinder ++ Valid roadworthiness (TÜV) until 02/2028 Würth workshop shelving system (see details below) Full service history maintained by authorized Opel dealer (see below) Euro 6 emissions standard Alarm system Permissible total weight: 2.8 t 3 seats (driver’s seat and twin passenger bench) Solid high partition in cargo area Rear parking sensors (PDC) Reversing camera with additional display in interior rear-view mirror Air conditioning non-functional!! Cruise control On-board computer Multifunction steering wheel Steering wheel radio controls Audio system Radio R 16 BT - FM/AM radio - Connections: USB, AUX-IN, Bluetooth - Hands-free function via Bluetooth Comfort package - Automatic headlight control (light sensor) - Automatic windscreen wiper control (rain sensor) Electrical Package: - Electrically adjustable and heated exterior mirrors (both sides) - Electric windows (both sides) Central locking with remote control Fog lights Daytime running lights Spare wheel in full road spec and jack Speed limiter to 130 km/h Driver assistance systems: - Brake assist - ABS, ASR, ESP - EDS electronic differential lock Rear wing doors without glazing (opening angle 180°) Sliding door on right in cargo area Body/Chassis: Panel van, standard cab L1H1 Wheelbase: 3098 mm Steel wheels 6.5x16 Cab floor: plastic covering Height and reach adjustable steering column Driver’s seat adjustable: seat height, backrest, lumbar support, fold-down armrest Cloth seat covers Engine: 1.6 L - 70 kW CDTI 6-speed manual transmission Fuel tank 80 L Heat-insulating glass Cargo area fitting: Würth workshop storage system (similar to Aluca, Bott, Sortimo). On the left: long shelving unit with shelf compartments, 1 drawer, and 2 pull-out trays for parts cases (cases not included). High, solid partition (no window). Hard-wearing plastic-coated wooden flooring. Special securing rails fitted (in floor, ceiling for tension bars, partition wall, and storage fittings), as well as lashing eyes distributed throughout the load area for load securing. Bright LED interior lighting. Full-height hardboard wall lining. 12V socket (C-pillar, right inside). Ventilation and extraction system installed. Load compartment dimensions (all approx.): Length: - Bottom: 252 cm - Middle/Top: 225 cm Height: 134 cm Tyres: Fjdpfxjyycmtj Alqopg All-season Goodyear 205/65 R 16 on steel rims, 8 mm tread front, 5 mm rear. Serviced by Opel dealer, history: 01/2021 at 41,502 km: inspection with oil change 09/2022 at 71,926 km: oil change 01/2023 at 77,554 km: inspection with oil change 07/2025 at 91,000 km: oil change Despite careful preparation, errors in description or data transmission (including images) can occur. Subject to errors and prior sale. Inspection by DEKRA or TÜV welcome.

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Fjdpfouxft Sex Alqjpg Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet Fpedeuxfu Nopfx Alqsg - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet Fedpfxsuxfucj Alqjpg -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: good (used), Crew container interchangeable body, Fjdpfxoyxpbbj Alqepg The container is self-sufficient, can be charged, and has power supply. It is insulated. Side door and 2 hinged doors. Dimensions: 600x250x250 cm.

Condition: good (used), functionality: fully functional, machine/vehicle number: 3005, Foellmer Motor Perforating Machine 45 ME with creasing and micro-perforation tool (see image) Activation: Electrically via foot switch. Working width: 45 cm / Table size: 60 x 35 cm Performance: Up to 15 sheets (depending on material) Fpodpewu Dvfefx Alqjg Dimensions H x W x D in mm: 1120 x 600 x 1000 Weight: 117 kg Connection: 400 V / Operating manual included. Shipping at buyer's expense possible. Collection possible. Our offers concern used machines, which may show signs of use (minor scratches or yellowing).

Condition: like new (used), functionality: fully functional, Equipment: compressor, MORGANA Digifold Pro By combining creasing and folding in a single unit, the Digifold Pro becomes a highly productive, user-friendly, and mobile finishing center. Perforating is also possible, further expanding its application range. With speeds of up to 6,000 sheets/hour and a maximum format of up to 900 x 358 mm, the new Digifold Pro offers even greater flexibility. A large touch-screen display makes operating the Digifold Pro and all other Pro Generation machines easier. Versatility The Digifold Pro can be used in three different modes as required: - As a creasing machine - As a folding machine Fedowndzbspfx Alqopg - As an integrated creasing and folding machine, performing both functions in a single pass. Feeder: suction feeder draws paper from below Paper format: max. 900 x 358 mm // min. 210 x 140 mm Paper weight: max. 400 gsm // min. 100 gsm Number of creases per sheet: 9 Max. number of folds per sheet: 2 Number of program memory slots: over 1,000 Min. distance between two creases: 40 mm Min. distance between two folds: 70 mm Min. crease distance from leading edge: 50 mm Min. fold distance from leading edge: 50 mm Min. crease distance from trailing edge: 50 mm Min. fold distance from trailing edge: 50 mm Fold length: 70 mm; Max. fold length up to 450 mm (automatic feed), up to 1,800 mm (manual feed) Fine adjustment: 0.1 mm increments Max. speed (A4): 6,000 sheets/hour Dimensions (L x W x H): 1,980 x 655 x 1,265 mm Weight: 190 kg Power supply: 230 V Shipping at buyer’s expense. 3-month bring-in warranty. All our offers are for used machines, which may show signs of use (minor scratches or yellowing).

Condition: refurbished (used), functionality: fully functional, overall weight: 600 kg, type of input current: AC, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in very good condition. The PowerSquare is not only versatile, but also extremely easy to operate and produces unbeatable professional brochures. Fodpfsxn Rdajx Alqjpg • Booklet maker for brochures up to 56 sheets / 224 pages at 80 gsm • Heavy-duty wire stitch head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic format adjustment, automatic wire length adjustment • 2 new front edge trimmer blades • 1 - 6 stitches, evenly distributed on the spine. Production of brochures without staples also possible. • Wire from spool: up to 291,500 stitches • Machine has been completely overhauled and operates without defects • Fully automatic machine setup • Immediately operational / production starts from brochure 1 • Test run possible by arrangement • Automatic triggering • 230 Volt / 600 kg • Format range from 120 x 200 mm to 370 x 520 mm Produce unbeatable professional brochures with the PSQ 224. Euro 27,900.00 plus VAT. Shipping / delivery available. Please note our offers refer to used machines, which may show signs of previous use (minor scratches or discoloration). Collection possible, shipping possible, installation and instruction available.

Condition: used, mileage: 768,718 km, power: 368 kW (500.34 HP), first registration: 09/2013, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,000 mm, color: white, gearing type: automatic, suspension: steel-air, Equipment: air conditioning, cruise control, differential lock, navigation system, parking heater, White color, leather seats, pneumatic leaf spring suspension, lift axle, intarder, digital tachograph, fifth wheel coupling: Fischer, electronic brake system (EBS), brake assist, automatic climate control, stationary air conditioning, adaptive cruise control, independent heating/preselection, comfortable front seats, pneumatic front seats, height-adjustable driver’s seat, driver’s armrest, heated front seats, headlamp washer system, radio/CD, Bluetooth mobile phone preparation, parking assistance, leather multifunction steering wheel, front lumbar supports, electric windows, roof spoiler, fog lights, electrically adjustable and heated mirrors, immobilizer, central locking with remote control, rear differential lock, front underrun protection bar, sun visor, spare wheel, fridge box, axle load indicator, hill start assist, LED daytime running lights, 2x7-pin socket connection, telematics system, speed limiter, cab suspension, pneumatic cab suspension, FMS data interface, 7-pin trailer connector, EEV calibration, INDUSTRIAL VEHICLES Iveco Stralis AS440S50 Road Tractor COLOR: WHITE YEAR: 2013-09 KM: 768,718 GVW: 26,000 cc: 12,882 Euro 5 FUEL: DIESEL Fpedeyw Av Aopfx Alqsg

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Fjdoyv A Dkjpfx Alqjpg Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 6,800 h, load capacity: 6,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: triplex, power: 75 kW (101.97 HP), motor manufacturer: Perkins, gearing type: hydrostat, battery voltage: 12 V, fork carriage width: 1,800 mm, fork length: 1,500 mm, Equipment: CE marking, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, For sale: Ranger all-terrain forklift! Excellent machine for a sawmill, featuring a large tilt angle, free lift for indoor operations, fork positioner, and integrated side shift – all functions operated via joystick! Great machine, come and see it and take it for a spin! On-board scale included. Helene Fischer is also playing on the radio :) Fsdpfxsyvyr Se Alqspg

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a new machine for cutting hoses made of plastic or textile (Cutex TW-69TUB). - Cutex TW-69TUB base unit - Hardened upper and lower blades - Cutting length adjustable in 0.1 mm increments Fodpeyay Duofx Alqepg - Transport via conveyor belt - Conveyor belt height and contact pressure adjustable - Mounted on a frame Optional (for an additional charge): A pre-feed device is available, which pulls the hose off the reel and feeds it to the cutting machine without tension. Also available as an option is a second set of blades (upper and lower blades). The machine is new and has never been used in production. It can be inspected and tested on site.

Condition: used, functionality: fully functional, machine/vehicle number: H2120X00.., Year of construction: 2020, operating hours: 1,256 h, load capacity: 3,000 kg, lifting height: 4,980 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork length: 2,200 mm, drive type: Diesel, Diesel Forklift VIN: H2120X00.. Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Solid Rubber Fpodpfxowlwp He Alqjg Front Tires Condition: 60 - 80% Rear Tires Type: Solid Rubber Rear Tires Condition: 40 - 60% Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Full Cabin

Condition: used, mileage: 680,000 km, power: 375 kW (509.86 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 * Telligent manual transmission with clutch * Tipping hydraulics * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder Fpsdpsyq A Drsfx Alqsg * Mega cab * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and smokes * Camshaft likely damaged Special equipment: Work lights on rear cab wall (top), audio system: Radio Truckline CC 65 / 70 with cassette deck, 220 Ah battery, comfort cockpit, air horn, movable cab entrance, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, auxiliary drive MB 2C, Voith retarder, low-maintenance fifth wheel, Fischer fifth wheel coupling, circuit breaker, seats in cab: driver's comfort suspension seat incl. horizontal suspension, sun visor, 24V socket in cab, straight front axle, transmission oil cooler Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, electrically adjustable and heated exterior mirrors, wide-angle exterior mirror heated (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf / air, electric window lifters, 80 A alternator, 16-speed transmission, interior filter: pollen filter, body/chassis: tractor unit, fuel tank: 400 litres, engine: 16.0 litre 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3300 mm, fifth wheel coupling: mounting height 150 mm, disc brakes, steel rims 9.00x22.5, cab control, Telligent shifting, Telligent brake system with ABS+ASR, front underrun protection, CB radio pre-installation, telephone/fax pre-installation, immobilizer, central locking incl. key, permissible total weight 26.0 t