Used Horizontal Order Pickers for sale (10,727)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN624401, Year of construction: 2020, operating hours: 523 h, load capacity: 1,200 kg, lifting height: 7,500 mm, free lift: 905 mm, fuel type: electric, mast type: triplex, construction height: 3,275 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 7,500 mm Free lift: 905 mm Iedpfx Apozu Nino Hobb Load capacity: 1,200 kg Load center: 400 mm MACHINE DETAILS Mast type: Triplex Fuel type: Electric Battery voltage: 48 V Rated power: 6.5 kW Permissible battery weight: 886–980 kg Overall height: 3,275 mm Weight without battery: 2,743 kg

Condition: good (used), functionality: fully functional, load capacity: 125 kg, Hebelift lift2move 125 2 units available, each with 2 batteries Ibjdpfx Aoxyzwbop Hsb

Condition: new, functionality: fully functional, machine/vehicle number: PRS200NEU, Year of construction: 2025, load capacity: 2,000 kg, mast type: simplex, drive type: Lithium-Ionen, construction width: 790 mm, Low-level order picker Chassis number: PRS200NEU Mast type: none Condition: New equipment Technical condition: New Front tyre type: Polyurethane Front tyre condition: New Rear tyre type: Polyurethane Rear tyre condition: New Battery voltage: 24V Battery capacity: 300Ah Battery type: Lithium-ion Iedpfx Apey Upumo Hsbb Battery year: 2025 Battery condition: New

Condition: used, functionality: fully functional, machine/vehicle number: 6568443, Year of construction: 2018, operating hours: 1,136 h, load capacity: 1,200 kg, lifting height: 5,540 mm, free lift: 1,200 mm, fuel type: electric, mast type: simplex, construction height: 3,100 mm, fork length: 1,200 mm, empty load weight: 5,950 kg, drive type: Elektro, High-lift order picker Chassis number: 6568443 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 80V Battery Ah: 960Ah Battery year of construction: 2018 Description: Toyota VCE 120 No.: M0446 Year of manufacture: 2018 Operating hours: 1,136 The device is visually and technically in very good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We still have a large selection of other devices on site. Ibedpfx Ajw I H Nasp Heb

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, mast type: telescopic, construction height: 1,385 mm, drive type: Elektro, Medium-height order picker Mast type: Telescopic Condition: New Technical condition: New Battery voltage: 24V Battery capacity: 105Ah Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: New Iodszrccispfx Ap Hsbb Override for lift/lower switch: No override for lift/lower. Drive/lift signal: All warning signals. Bumper: Bumper with rubber protection. Storage compartment on the right side. Load platform, manually adjustable: 540 x 685 mm. Strobe light: Front & rear. Storage compartment. Operator login code: Access 123. German signage. Operating manual: German. Paint: Orange. Battery: 205 Ah, maintenance-free. Charger: 30 Amp, 85-265 VAC with cord and IEC socket with CEE 7/7 plug.

Condition: excellent (used), Year of construction: 2018, lifting height: 2,260 mm, fuel type: electric, mast type: duplex, battery manufacturer: Hawker, battery capacity: 620 Ah, battery voltage: 48 V, color: other, Empty weight: 1.914 kg Battery: 620 Ah, 48 V, Year of manufacture 2018, Brand of battery Hawker Lifting capacity: 1.000 kg Technical condition: very good Visual appearance: very good Ibedev Ug N Aopfx Ap Hob EPA Marked: yes Please contact Bas Sindorf for more information

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS 2 AXIS MITUTOYO DIGITAL READOUT 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT Iedpfxoxcn Hue Ap Hsbb CLEAN CONDITION

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 739 h, load capacity: 200 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 1,422 mm, empty load weight: 640 kg, total length: 152 mm, drive type: Elektro, construction width: 750 mm, Medium lift order picker Mast type: Telescopic Technical condition: very good Battery Volt: 24V Battery Ah: 190Ah Battery manufacturer: Jungheinrich Battery type: Gel Iedpfxszhyd As Ap Hjbb Battery year of construction: 2019 Battery condition: 60 - 80% Description: Inspection and UVV new Storage table manually adjustable, electric steering, two-hand operation, warning tone when lowering, mini display, shift key, integrated charger, gel batteries

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 200 kg, lifting height: 7,750 mm, fuel type: electric, mast type: telescopic, construction height: 2,000 mm, empty load weight: 750 kg, total length: 780 mm, drive type: Elektro, construction width: 1,280 mm, High-lift order picker Mast type: Telescopic Condition: New Technical condition: New Battery voltage: 24V Battery year of manufacture: 2025 Ibodpfx Aezrclksp Hsb

Condition: used, machine/vehicle number: 17086, Year of construction: 2019, operating hours: 572 h, load capacity: 336 kg, lifting height: 3,000 mm, fuel type: electric, mast type: other, construction height: 1,360 mm, battery voltage: 24 V, overall weight: 800 kg, 5145468 Serial Number: 2281300062 Ibedpjzfd Tijfx Ap Hjb Battery Details: 24 Volt NEU!!! (05.2026)

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Ibjdpez Aquhofx Ap Heb Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, machine/vehicle number: 17090, Year of construction: 2017, operating hours: 6,011 h, load capacity: 1,000 kg, lifting height: 4,550 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 3,100 mm, battery voltage: 24 V, fork length: 1,200 mm, overall weight: 2,868 kg, Equipment: 3rd hydraulic function, 5145469 Serial Number: 612101H00204 Ibsdpezfd T Nefx Ap Hsb Battery Details: 24V 6PzS 840Ah (aus 2022)

Condition: new, machine/vehicle number: 25469, Year of construction: 2023, operating hours: 1 h, load capacity: 135 kg, lifting height: 2,850 mm, fuel type: electric, mast type: simplex, construction height: 1,414 mm, .: 25469 Device details: Year of manufacture: 2023 Load capacity: 135 kg Lifting height: 2850 mm Recorded operating hours: 1 h Mast type: Standard Mast height: 1414 mm Length/Width/Height: 1525 / 750 / 1414 mm Operating weight: 630 kg Isdpetw Dc Nefx Ap Hobb Additional device information: ---- The operating hours stated are generally read from the device. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments and sweepers available immediately for you. Of course, also for rent! We are happy to buy your OLD one. If you have any questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to hearing from you! We speak English Subject to prior sale and errors for this offer. In the dealer business the device is sold in its current condition, not refurbished. All information without guarantee; subject to errors and changes.

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Ibodpfx Asyf Hliop Hob Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: FN531056, load capacity: 1,000 kg, empty load weight: 2,727 kg, lifting height: 3,810 mm, construction height: 2,430 mm, operating hours: 239 h, Jungheinrich EKS 210 high-lift order picker, year of manufacture 2017 with duplex mast Specifications: Jungheinrich EKS 210 Year of manufacture: 2017 Recorded operating hours (h): 239 Mast type: Duplex Lift height (mm): 3810 Free lift (mm): 850 Overall height (mm): 2430 Isdpfx Apsy H Exre Hobb Load capacity (kg): 1000 Fork length (mm): 900 Own weight (kg): 2727 Front tyres: Polyurethane Rear tyres: Polyurethane Battery year: 2017 Battery capacity (Ah): 465 Battery voltage (V): 48

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: nbh 170R Year of manufacture: 2005 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 1.000/800/800 mm - Workpiece swivel range within the working area: Ø 900 mm - Distance from table centre to spindle nose in Z: 138.9 (HSK-A 100) mm Position measurement system - Encoder scales: direct (measurement method) - Position uncertainty A according to DIN ISO 230-2: 0.007 mm 180-degree pallet changer with 4 x 90-degree pallet rotators Pallet - Pallet clamping surface to DIN 55201, Form A2: 500 x 630 mm - Transport load per pallet: approx. 0,8 tons - Height of the system: 1.100 mm Ibodpfx Apszviaie Hjb NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Repeatability: ± 0,001 degrees - Accuracy across all positions: ± 0,002 degrees - Permissible torques on the clamped table: * Tangential torque: max. 7.000 Nm * Tilting moment: max. 16.000 Nm - Clamping forces: * on the table: 147.000 Nm * on the pallet: 84.600 Nm Working spindle / gear head - Tool holder to ISO 12164 (DIN 69893): HSK-A 100 - Diameter at front bearing: 100 mm - Drive power 100% duty cycle/60% duty cycle: 37/46 kW - Speed range: 25 – 10.000 rpm Feed / Feed force / Rapid traverse: - Feed range X/Y/Z axes: 1 – 60.000 mm/min - Feed force on X/Y/Z axes, 25% duty cycle: approx. 15.000 N - Rapid traverse speed, X/Y/Z axes: 60 m/min - Rapid traverse, rotary table: 30 rpm - Acceleration: approx. 6 m/s² - Ball screw (pitch): Ø 50 (30) mm Tool magazine for 4 magazine cassettes, including two additional magazine cassettes. Electrical - Rated power: 74 kVA Compressed air Coolant system, make: KNOLL The internal coolant supply can be switched to compressed air. - Coolant pump 20–70 bar - Coolant tank, 2.500 l Machine layout - Space requirements, L x W x H: approx. 8 x 3.5 x 3.5 m - Weight: approx. 24 tons ACCESSORIES / EQUIPMENT: - Control system: Siemens SINUMERIK 840D ADDITIONAL EQUIPMENT FOR AUTOMATED MANUFACTURING PALLET STORAGE SYSTEM Technical data sheet with full details, including information on the wide range of features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 710119036813, Year of construction: 2019, operating hours: 999 h, load capacity: 2,400 kg, lifting height: 150 mm, free lift: 150 mm, battery capacity: 500 Ah, fork carriage width: 550 mm, fork length: 2,400 mm, tire condition: 100 %, Equipment: fork extension, Linde N24 electric horizontal order picker from 2019 with 999 working hours. Ibodpfxowp R Rfj Ap Hjb Load capacity of the device is 2400kg. Fork length 2400mm (two Euro pallets). The device is in like-new condition, no need for repairs, hydraulics are tight. Battery 2019 in new condition. Maintained & capacity checked by specialist service. Technical data: Manufacturer: Linde Model: N24 Hours: 999 Year of construction: 2019 Load capacity: 2400kg Construction height: 1600mm Fork length: 2400mm Lifting height: 150mm Battery: 2019 Battery: 90% remaining capacity, built in 2019 but unused. Tires new. New UVV upon request. Price incl. VAT Netto export possible.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 1,650 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, faceplate diameter: 2,000 mm, SMTCL (Shenyang No.1 Machine Tool Works) CW61200 universal horizontal center lathe, year of construction 2005, made in China. The bed ways are in good condition and the machine is in active production use. Technical data: - Faceplate / chuck diameter: 2,000 mm - Turning diameter over bed: 2,000 mm - Turning diameter over cross slide: 1,650 mm - Turning length / machining capacity: 8,000 mm (8 m) Iedpjz Anxqofx Ap Hjbb Equipment: - 2 x standard steady rest - 1 x heavy-duty steady rest - Digital readout (DRO), retrofitted by us In good working order and ready for immediate delivery.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, TOS Varnsdorf WHQ 13.8 CNC table type horizontal boring mill, year of construction 2000, made in the Czech Republic. Iedjz Ap Awopfx Ap Hsbb The machine is controlled by an original Heidenhain TNC 430 CNC with the Heidenhain operating panel and runs programs produced with CAM software. The control cabinet air conditioning unit was replaced one year ago. The machine is well maintained and in full working order. Technical data: - Control: Heidenhain TNC 430 - Spindle diameter: 130 mm - Spindle speed: 10 - 2,500 rpm - Tool taper: ISO SK 50 - X travel: 3,500 mm - Y travel (vertical axis): 2,500 mm - Z travel: 1,250 mm - Table size: 2,200 x 1,800 mm - Operator platform with 250 kg load capacity - Air conditioning unit fitted one year ago - Programmable via CAM software The machine can be inspected under power in our workshop.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230L1 Dust Extractor with Dust Filter The CORMAK FM230L1 with a dust filter is a modern, mobile dust extractor that combines high operating efficiency with a compact design. The use of a horizontal impeller and an advanced filtration system allows the machine not only to effectively remove sawdust and wood chips from woodworking machinery, but also to vacuum production hall floors. The machine has been designed for professional woodworking facilities as well as hobby workshops. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ensures efficient removal of wood chips and sawdust from a single workstation. Balanced WhirlWind metal impeller – quiet, stable operation and increased durability. Dust filter and plastic waste collection bag – effective separation of contaminants and cleaner air in the workshop. High negative pressure and horizontal suction system – efficient extraction of even fine dust and particles. Production hall vacuuming capability – the included wide floor nozzle expands the functionality of the machine. Compact dimensions – takes up little space in the workshop. Large wheels and ergonomic handle – easy transportation in various working conditions. Construction and Technology The heart of the FM230L1 woodworking dust extractor is a multi-blade WhirlWind series impeller mounted horizontally in a metal housing. It provides even suction pressure and smoother operation compared to standard vertical designs. The reinforced motor operates in continuous S1 duty mode, ensuring reliability even during intensive use. Additional structural supports eliminate vibration and ensure a long service life of the suction system. Precision and Operating Efficiency The FM230L1 operates at a rotational speed of 2,800 rpm, allowing efficient extraction of sawdust, wood chips, and fine dust generated by woodworking and sanding machines. The filtration system removes airborne contaminants, reducing the need for frequent cleaning and improving operator comfort. The set includes a large floor nozzle, making the machine a practical sawdust vacuum cleaner as well. Applications Craft woodworking shops and furniture manufacturing facilities Educational and school workshops Sanders, saws, milling machines, and jointers Cleaning production halls and production lines Standard Equipment Dust filter Plastic waste collection bag Ibjdpfoz A Ur Ujx Ap Heb Floor nozzle Metal fastening clamps Lockable, bearing-mounted castor wheels Optional Equipment Ø100 mm extraction hose Galvanized clamp Additional filter bag set Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Extraction capacity 1,150 m³/h Negative pressure 1,020 Pa Noise level 65 dB Bag capacity 90 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg The FM230L1 with dust filter is a compact and reliable woodworking dust extractor designed for everyday work with wood and wood-based materials. Choose quality, stability, and industrial-grade filtration – order today and improve working conditions in your facility!

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Ibjdpfjzn N Ikex Ap Hjb

Condition: like new (used), Year of construction: 2007, Horizontal conveyor LISEC KFL-55/22 Isdpfx Ajiy Dh Hop Hsbb Maximum working width 2200 mm Motorized With castor rollers Total floor dimensions: L 5800 x W 2300 mm Year of production: 2007 Very good and clean condition Good working order, tested Availability immediate

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Ibsdpfezzbcyjx Ap Hsb Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Vacuum pump Tools

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,401 h, load capacity: 1,000 kg, lifting height: 1,880 mm, free lift: 860 mm, fuel type: electric, construction height: 1,560 mm, fork length: 1,150 mm, drive type: Elektro, Vertical order picker Load centre: 600 Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Ibodpfeyyrv Rox Ap Hob Battery capacity: 620Ah Battery year of manufacture: 2021 Description:

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder Iodpfx Aoywpcpep Hobb • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter