Used Forkardt Ksh 200 for sale (15,787)

Condition: good (used), Year of construction: 2015, operating hours: 3,572 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 1,200 kg, mileage: 3,572 km, This electric ride-on pallet truck by ATLET is from 2015. The pallet truck has a capacity of 2,000 kg and is equipped with long forks of 1,600 mm. It features a 2015 battery WITHOUT CHARGER and has 3,572 operating hours on the clock. Schedule a test drive or order the pallet truck in our webshop! Hnedey R Amzspfx Ag Iel

Condition: ready for operation (used), Chip Conveyor, Knoll 320 s-1/200, Used Machine Manufacturer: Knoll Type: 320 s-1/200 Year: 2015 Overall dimensions: 6200 x 1310 x 1610 mm Belt dimensions: 500 x 1400 x 4700 mm Hjdswmmltopfx Ag Ienl Lamella spacing: 315 mm

Condition: ready for operation (used), Chip conveyor, chip transporter, Knoll 320 S-1/200, Used Machine Manufacturer: Knoll Type: 320 S-1/200 Overall Dimensions: Width: 6200 mm Depth: 1300 mm Height: 1610 mm Belt Specifications: 480 x 130 x 60 x 310 mm Belt Speed: 1.8 m/min Year of Manufacture: 2015 Discharge Opening Size: 550 x 530 mm Hopper Opening: 3120 x 410 mm Slat Pitch: 315 mm Hnedpfoxtwqdjx Ag Iel

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Hsdpfeynky Aox Ag Ionl Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm Hodox S Hm Iepfx Ag Ienl X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis Hjdowpufgepfx Ag Ijnl 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Hsdpfxow Rm Die Ag Ijnl Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Hnodpoyyxh Tofx Ag Ijl Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW Hnsdpfxjy Rutas Ag Iel weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1984, pressure 200 t distance between columns 1800 mm stroke 710 mm Distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1600 x 1300 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 250 mm Hjdpfx Ajyx Ilreg Isnl die cushion area 1400 x 1080 mm table height over floor 800 mm side window 800 mm ram surface 1660 x 1300 mm speed down 400 mm/s speed up 410 mm/s working speed 14,3 - 49,7 mm/s power requirement 38,0 + 13,0 kW weight 25,0 t Dimensions (WxDxH) 3,65 x 3,3 x 5,4 m height over floor 5,05 m height beneath floor 0,4 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning (in side frame), mechanical depth stop (motoric adjustable), mechanical ram interlocking, two-hand operation

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW Hnodpfoxwdrvsx Ag Iel weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2011, Pressure 200 t stroke 900 mm distance between columns 3520 mm Distance table/ram, max. stroke up, adjustment up 1400 mm Table surface area 3500 x 1600 mm Ram surface 3500 x 1600 mm Hedpfx Agev Svbve Isnl Side window 1150 mm feed down 500 mm/s feed up 550 mm/s working feed 38 mm/s oil volume 2000 l power requirement 90,0 + 21,0 kW Weight 34,00 t dimensions (WxDxH) 4,4 x 3,3 x 5,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back (cascading), hydraulic ram interlocking, operation with up to 4 operator's possible

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s Hjdsvzxqropfx Ag Ionl working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation

Condition: used, Year of construction: 1992, Pressure 200 t distance between columns 1910 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1900 x 1150 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 300 mm die cushion area 1500 x 950 mm table height over floor 800 mm side window 1000 mm ram surface 1900 x 1100 mm return capacity 36 t speed down 400 mm/s speed up 170 mm/s working speed 30,5 mm/s oil volume 1500 l height over floor 4,85 m height beneath floor 2,6 m power requirement 45,0 kW weight 38,0 t Hodpfxjvuui Re Ag Isnl dimensions (WxDxH) 3,05 x 2,8 x 5,55 m year of manufacture 1975 - modernization 1992 with oil-hydraulic drive, hydraulic drawing cushion in table, ram interlocking

Condition: used, Year of construction: 1990, pressure 200 t distance between columns 1400 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1300 x 1100 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 700 x 700 mm capacity of ejector in ram 10 t Hnedpfx Ajvut T Ijg Iol ejector stroke in ram 50 mm table height over floor 930 mm side window 770 mm ram surface 1300 x 1100 mm speed down 400 mm/s speed up 410 mm/s working speed 20 - 50 mm/s return capacity 30 t oil volume 1350 l power requirement 70,0 kW weight 23,0 t dimensions (WxDxH) 4,5 x 3,0 x 3,5 m with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, controllable dependent on pressure/time and way, cutting impact cushioning No foundation pit necessary

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. • Total cycles: 1,260,207 • Operating voltage: 3 / N / PE AC 400 / 230 V • Frequency: 50 Hz • Control voltage: AC 120 V / DC 24 V • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A Hnjdpfx Agjy Rpdtj Ijl • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles

Condition: excellent (used), Year of construction: 2015, LAUDA Integral XT 1590 WS Manufacturer: LAUDA Dr. R. Wobser GmbH & Co. KG Model: Integral XT 1590 WS Order No.: LWP 551 Serial No.: LWP551-15-0010 Year of manufacture: approx. 2015 (derived from serial number) Design: Process thermostat / circulating chiller For sale is a used LAUDA Integral XT 1590 WS temperature control and cooling system for industrial applications in laboratory, research, chemical, pharmaceutical, and production environments. The unit is suitable for precise temperature regulation of external circuits, reactors, test benches, and process plants. Technical data as per nameplate: Voltage: 400 V / 3~ / PE / 50 Hz Power consumption: 13.8 kW Heating capacity: 8.0 kW Protection class: IP21C Refrigerant Circuit I: Refrigerant: R404A Filling quantity: 3.5 kg Refrigerant Circuit II: Refrigerant: R508A Filling quantity: 1.75 kg Technical data as per manufacturer: Operating temperature range: approx. -90 °C to +200 °C Cooling capacity: up to approx. 15 kW at +20 °C Max. pump pressure: approx. 2.9 bar Max. pump capacity: approx. 45 l/min Filling volume: approx. 10.5 – 17.4 liters Features: - LAUDA Command control system - Digital temperature regulation - Graphic display / LCD - RS232 / RS485 interface - Variable pump - Magnetically coupled pump - Connections for external temperature control circuits - Mobile floor-standing unit - Industrial-grade design Condition: Used device with age- and usage-related signs of wear. Hnedpfx Asy Rmimeg Iol Visual condition as per photos. A full technical inspection under process conditions has not been performed. Scope of delivery: LAUDA Integral XT 1590 WS with control unit Scope of delivery as shown Dimensions & weight: Dimensions as per manufacturer: approx. 700 x 550 x 1600 mm (W x D x H) Weight as per manufacturer: approx. 280 kg Notes: Inspection possible by appointment. Loading and collection possible by prior arrangement. Commissioning, maintenance, and installation may only be carried out by qualified personnel. Commercial sale – sold without warranty. Subject to change and error.

Condition: excellent (used), functionality: fully functional, EMMES EPP 200 pneumatic block gluing press Maximum gluing length: 2000 mm Gluing height: 1500 mm Base width: 100 mm Number of vertical clamps: 6 Hsdsy Ri Raopfx Ag Ijnl Number of frontal clamps: 3

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 32 mm -Piston rod: Ø 14 mm -Eye diameter: 12 mm -Stroke: 200 mm -Dimensions: 130/70/H405 mm -Weight: 3 kg Hedpfxjdv D E De Ag Ienl

Year of construction: 1985, condition: refurbished (used), Cup grinding machine Make: GMN Model: MPS E-200 Year of manufacture: 1985 Machine No.: 9701 Hjdpfx Agegayvqe Ijnl with warranty Accessories: - Grinding wheel Ø 200 with flange - Dressing diamond - lateral dresser - magnetic clamping plate 250 x 150 mm (pole pitch: 2 mm) - wet grinding device - instruction manual - used, as seen -

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 31 kVA, controller manufacturer: Fanuc, controller model: i Series, total height: 300 mm, total length: 3,447 mm, total width: 2,835 mm, table width: 200 mm, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (3+2) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (3+2) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 3+2 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 3+2 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications Manufacturer: Doosan Model: DNM 200/5AX Year: 2013 Machine Type: 5 Axis (3+2)CNC Vertical Machining Centre Hjdpfx Ajy St Sdjg Isnl Axis Configuration: 3+2 / 5 Axis Control: Fanuc i Series X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Tool Capacity: 30 Station ATC Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Machine Dimensions: 3447 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine This used Doosan 5-axis machining centre is supplied with an excellent package of equipment, including: Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 3+2 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 3+2 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Hedjw Hc Spjpfx Ag Isnl Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 06/2028, total width: 420 mm, total length: 530 mm, total height: 800 mm, empty load weight: 110 kg, input frequency: 50 Hz, overall weight: 110 kg, electrical fuse: 10 A, power: 1 kW (1.36 HP), NEW NEW +++ Planetary Mixer +++ NEW NEW Sinmag Model: SM 200 Proven technology ... tried and tested many times! Simple manual operation Mixer with 3-speed gearbox 1 stainless steel bowl, 20 liters 1 flat beater, 1 dough hook, 1 whisk Bowl safety guard / safety grid Bench-top machine with bowl lift Exclusive to us: DGUV V3 tested Dimensions (WxDxH in mm): 420 x 530 x 800/1116 Weight: 110 kg Connection: 220V NEW machine, SAB-tested 24 months warranty + spare parts service TOP quality and price in one machine! Your partner with extra service! Option: - Delivery service - Leasing & rental service - Additional bowls & whisks Hnodpfx Aevdktkjg Ijl - 10 liter - Maintenance contract - Base frame Here you will find a wide selection of planetary mixers!

Condition: used, axle configuration: 3 axles, total width: 25,400 mm, total height: 26,700 mm, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - Rear air suspension - Front air suspension - Disc brake system = Notes = For vehicle inquiries, Mr. Seidel is available to assist you (by phone). Faymonville MAX 200 flatbed low-loader trailer Additional rear work lights, air suspension, SAF axles, disc brakes, spring accumulators, first axle liftable, third axle steered, preparation for rotating beacon, Wabco ABS, cargo area dimensions: L 13,500 mm W 2,540 mm, tire tread depth: 1st axle 4-7 mm, 2nd axle 6-10 mm, 3rd axle 7-9 mm, permissible gross weight: 45,000 kg, unladen weight: 8,743 kg, payload: 36,257 kg Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For more information, please visit our homepage. ... Subject to errors, changes, and prior sale! - Hnedpfey Srudex Ag Iol Steering axle = Further information = Unladen weight: 8,743 kg Payload: 36,257 kg Gross vehicle weight: 45,000 kg For further information, please contact Tobias Ebert.

Condition: new, Year of construction: 2026, saw blade diameter: 630 mm, cutting height (max.): 200 mm, cutting range round steel at 90°: 200 mm, saw blade speed: 120 rpm, cutting range square steel at 90°: 170 mm, cutting diameter: 200 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 120 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-200 Circular sawing machines are industrial cutting solutions used for the high-precision and fast cutting of pipes, profiles, and solid metal materials. They are widely utilized on serial production lines to achieve quick, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency thanks to their robust mechanical design and advanced automation system. The PLC-controlled automation system and touch screen operator panel enable easy adjustment of cutting parameters and allow serial cutting operations to be performed with high accuracy. The spheroidal cast iron machine body, powerful gearbox system, and servo-driven feed technology ensure vibration-free operation and extended tool life. CHK Series machines are specifically engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feeding system • PLC-controlled automation system • High cutting precision and stability • Robust construction for industrial use Fields of Application • Steel service centers • Metal processing facilities • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supplier industries Standard Features • Precise cutting and smooth surface finish • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vise pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic braking system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip cleaning brush • Air pressure control system • Easy operation via PLC control unit • Torque control system for extended blade life • Easy adjustment of vise pressure according to material type Technical Specifications – CHK-200 Cutting Capacity (Round): Ø60 – 200 mm Cutting Capacity (Square): Max 180 × 180 mm Cutting Capacity (Rectangular): Max 170 × 210 mm Hjdeyq Rk Hspfx Ag Ijnl Main Motor Power: 22 kW Hydraulic Motor Power: 5 kW Material Feed Motor Power: 3 kW Circular Saw Blade Size: Ø630 × 2.7 × 3.4 mm Blade Speed Range: 30 – 120 rpm Single Feed Length: 770 mm Bundle Feed Length: 3000 mm Scrap Length: 150 mm Machine Weight: 5500 kg