Used Farina Hydraulic Press Brake *New* for sale (53,049)

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories Itjdpfxjgrkigo Ah Esl It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter Iedpemck Ryjfx Ah Eotl - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Year of construction: 2021, machine/vehicle number: 12986, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 12986 Iedpfx Ahsz Aa Ecs Ejtl - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Ijdpfszwcl Usx Ah Eotl Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: like new (used), Year of construction: 2017, oil tank capacity: 150 l, Equipment: documentation/manual, Durma AD-S 30100 CNC Hydraulic Press Brake (2017) – 100t x 3050mm Description: For sale is a high-quality, well-maintained, and fully operational Durma AD-S 30100 CNC hydraulic press brake from the year 2017, directly from production. The machine is regularly serviced, extremely precise, and ready for immediate use. Factory Technical Specifications: Year of Manufacture: 2017 Bending Force: 100 tons Bending Length: 3050 mm Machine Dimensions (L × W × H): 4500 mm × 1900 mm × 2900 mm Machine Total Weight: 8500 kg Hydraulic Oil Capacity: 150 liters Operating Hours: [10051] hours Equipment and Features: Itodszd U Tdopfx Ah Eel CNC Control: Modern, large-sized graphic touchscreen controller (Delem / Durma) on a swiveling console, with 2D/3D bending simulation. Axis Configuration: CNC-controlled Y1, Y2, X, and R axes. Crowning: CNC-controlled automatic table crowning system for uniform bending angles across the entire length. Safety: Factory-installed, premium laser hand and finger protection in the work area. Accessories: The upper bending die (punch) and lower die/matrix system shown in the pictures are included with the machine and are part of the price. The machine can be inspected and tested in operation at our facility by prior arrangement. The buyer is responsible for arranging transport and dismantling. Asking Price: 45,000 EUR + VAT Location: [City / Hungary]

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4020-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1800 mm - Height: 2800 mm - Weight: 13700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Isdpfx Aotizaysh Eotl Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Iodpfjtizavjx Ah Ejtl Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: excellent (used), Year of construction: 2009, Used 3-meter Safan E Brake Itjdpfxszz N R Ee Ah Eol Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons E Control CNC control system Y1, Y2, X, R, Z1, and Z2 CNC control Wila New Standard hydraulic top clamping system Year of manufacture: 2009 New PC installed

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Used very clean, well maintained Trumpf V 85S series hydraulic down stroke cnc pressbrake with a large amount of tooling for sale Trumpf v85s 2.5 metre x 85ton – 4axis cnc pressbrake in good condition Make: Trumpf Model: Trumabend v85s Year: 1996 Max. pressing force: 850 kn / 85ton Itsdpfx Ahjr Hcl Ae Eol Max. stroke: 215mm Brake time: 86ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Large amount of upper and lower Trumpf tooling, some tooling is brand new Complete with: • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Isdpfsvbdpyjx Ah Eetl Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Itjdpfxevq Rtks Ah Ejl Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, throat depth: 300 mm, bending force (max.): 230 t, back gauge: 600 mm, distance between stands: 4,050 mm, working length: 5,000 mm, TECHNICAL DETAILS Pressing force: 230 t Bending length: 5,000 mm Distance between uprights: 4,050 mm Itsdpfxsyg D Abe Ah Esl Installation height: 800 mm Ram stroke: 500 mm Throat depth: 300 mm Backgauge: 600 mm Control: BC 45 Graphic MACHINE DETAILS Total power requirement: 18.7 kW Machine weight: approx. 22.0 t Space required: approx. 6.0 x 2.2 x 3.75 m EQUIPMENT 4 backgauge fingers Crowning device Manual finger height adjustment via crank 140 mm Front groove in the table Various tools

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, stroke length: 320 mm, travel distance X-axis: 800 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19 MX, working width: 3,150 mm, bending force (max.): 100 t, distance between stands: 2,700 mm, control type: CNC control, degree of automation: automatic, number of support arms: 4, actuation type: electric, For sale is a Mecos Synchro 100/3000 press brake with a working length of 3000 mm. The machine has been hydraulically and mechanically inspected and is ready for operation. Isdpfxoyrf Sbe Ah Eotl The machine features axes X1, X2, Y1, Y2, R as well as Z1 and Z2. The entire electrical system has been renewed, including control, servo motors, controllers, and safety PLC. We offer a 1-year warranty on all electrical components. Equipped with a Cybelec control unit supporting both graphical and numerical programming. DXF files can be directly imported into the control system. Inspection possible by appointment.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. The machine is in perfect working order and can be inspected while powered on. Ijdpfx Aszzd Rgoh Ejtl

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS Press force: 160 t Bending length: 4100 mm Distance between uprights: 3100 mm Control system: DELEM DA66W Table width: 120 mm Stroke: max. 800 mm Downstroke speed: 80 mm/sec Upstroke speed: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS Oil capacity: 185 l Iodpfxjlp Iq Rs Ah Estl Total power consumption: 24 kW Machine weight: approx. 13 t Space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: like new (used), Year of construction: 1991, input voltage: 200 V, pressing force: 3 t, operating speed: 47 mm/s, table width: 410 mm, table length: 320 mm, throat depth: 125 mm, oil tank capacity: 6 l, total length: 735 mm, total width: 505 mm, total height: 987 mm, for sale in new condition ATSUGI 3 ton Hydraulic Press Atsugi Model AP-3-M Used load range: 6-30 (kN) Stroke: 150mm Down speed: 46.7 (mm/s) Up speed 56.7 (mm/s) two-handed operation mobile workbench Operating area: Open height: 250mm open depth: 125mm table size: 410x320mm Motor specification 3 phase AC200V 4P 1.5KW two-handed operation . mobile workbench Operating oil / quantity: 6 Liter Total weight (kg) 200 Iedpfx Aev Sd Aneh Ejtl Body size ​ Height (mm) 987 width (mm) 505 Depth (mm) 735

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Isdjzz Rz Sjpfx Ah Eotl Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling

Condition: good (used), Year of construction: 2012, Used 3-meter CNC press brake from Amada Type: HD 1003 NT Capacity: 3100 x 100 tons Year of manufacture: 2012 Servo-hydraulically controlled AMNC control system X1, X2, R, Z1, and Z2 CNC controlled Akas Fiesller laser safety system Itodpfx Aszd S A Njh Ejl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 200 t, stroke length: 300 mm, operating speed: 90 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, overall weight: 17,000 kg, working width: 4,060 mm, back gauge travel distance R-axis: 150 mm, distance between stands: 4,200 mm, warranty duration: 6 months, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Additionally, the machine consumes electricity mainly when the slider goes down. The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Itedpjvpqpijfx Ah Eel Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Itsdoxaabfjpfx Ah Esl * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: good (used), Year of construction: 2011, Used Trumpf 5130, 3-meter CNC press brake Type: 5130 Capacity: 3100 x 130 tons Year of manufacture: 2011 Isdpfjzd S Apsx Ah Eotl Wila hydraulic upper and lower clamping system Bending aid X, R, Z1 and Z2 CNC-controlled back gauge

Condition: like new (used), Year of construction: 2018, machine/vehicle number: STHP 80KN, functionality: fully functional, pressing force: 8 t, table width: 300 mm, total length: 200 mm, total width: 510 mm, total height: 1,320 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr Itedpfx Ahjt Rhb Io Eel with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: like new (used), Year of construction: 2020, Like new press brake from Ermaksan Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Iodpfjzunlhjx Ah Estl Amada/Euro clamping system Manual crowning Includes a set of tooling

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: B0104A0167, functionality: fully functional, operating hours: 29,966 h, pressing force: 130 t, stroke length: 215 mm, overall weight: 11,250 kg, 6 controlled axes Includes new tools worth €12,000!!! Isdpezy Ryxsfx Ah Eetl Everything is fully functional.

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 82885, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 135 t, stroke length: 200 mm, total length: 3,500 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 7,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HACO ERM 30135 (82885) Completely rebuilt, including a new control system. Technical condition: As new. Bending length: 3100 mm Tonnage: 135 tons Type of press brake: Synchronized Back gauge: Y1 + Y2 + X CNC controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Throat depth: 400 mm Overhang: 250 mm Stroke: 200 mm Itjdpfxozxgrhe Ah Eol Control system: ATS 595 Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Year of manufacture: 2007 Overall length: 3500 mm Overall depth: 1700 mm Overall height: 2500 mm Delivery and installation at your location are possible; delivery costs and any additional charges will be discussed separately.