Used Erlenbach Komplett Eps Gyártóüzem Complete Eps Production Line for sale (32,037)

Condition: good (used), Year of construction: 2007, functionality: fully functional, total length: 33,300 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Insulation glass production line for Low-E glass LiSEC – Austria, h=2.00 m with Gas Press, Sealing Robot, … Glass dimensions: max. 3500 (4500) x 2000 mm Year: 2007. In good condition. Inspection during production is possible by appointment. 1. AKL, vertical edge deletion system for coated glass sheets, 2. RTL-20B (2003), washing and drying machine, 6 brushes, 3. PSL-35/20V (1989), automatic assembly station for insulating glass, 4. FPS-35/20U2B, gas filling press, 5. UKL-35/23VA, tilting table 6. KFL-35/22, horizontal roller conveyor 7. VFL-1D/16 + DOS (PS), automatic sealing system / robot with dosing unit, 8. A complete set of appropriate transport stations (inlet and outlet). Hodpfxjy R Tc Hs Am Aofh

Condition: used, functionality: fully functional, COMPLETE POLAR 137 ED AUTOTRIM CUTTING LINE CONSISTING OF: POLAR 137 ED AT GUILLOTINE with Autotrim device for automatic waste trim removal, useful cutting width 137 cm, complete with side connecting stainless steel air tables, press before the blade, swiveling and tiltable saddle POLAR RA 6 JOGGER with air removal roller, Year 2000 Hsdpfx Amoy R R Rho Asfh POLAR TR 130/4 AUTOMATIC DELIVERY Possibility to configure the delivery and jogger on the right or left The line is installed and available for testing at our showroom

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Hfodpfxsw Imp Ho Am Aeh Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: ready for operation (used), functionality: fully functional, For sale is a special-purpose machine—a complete production line for manufacturing heating elements. The production line was designed and built by Bosch itself. The heating elements are suitable for use in instantaneous water heaters. You can see an image of these elements in the second picture of the gallery. The production line also includes a testing station. According to our checks, all required documentation is available. Transport and loading can be organized throughout Europe for an additional charge upon request. Hfjdpfxjy H H N Eo Am Ajh Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Are you looking for a high-quality yet cost-effective machine for your production? Or are you looking to sell your equipment? For more information or contact options, please reach us via the contact form.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Ultra-high productivity cutting line comprising: * POLAR 137 X Paper Cutter, year 2005 Hsdpfx Asyzxlhjm Asfh Usable working width: 137 cm. 2 HSS blades, stainless steel air table 80x100 cm with lateral air tables, connected to the Jogger and Discharge System * POLAR RA 4 Jogger, year 2005 with air-removal roller and safety barriers * Automatic discharge system (palletizer) model Polar TR130ER-4 RIGHT, year 2005 * Pile Lifter Polar LW 1000/4, year 2005 Line installed and ready for any test. Technical and aesthetic condition like new. Ready for immediate delivery.

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) Hodpfx Ashm Exdjm Aofh 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros.

Condition: excellent (used), Year of construction: 1993, OMAG TRONIC 140/120 complete line; production pallet size 1450x1100 mm, double-feed machine, year of manufacture 1993, rotating storage trolley, repacking with strapping, 10 moulds, Siemens S7 control. Hedpfx Amjxl D Ime Aefh

Year of construction: 1990, condition: used, We offer a used technological line for the production of ceramic products (Handle/Keller) characterized by exceptional durability and ease of maintenance. This line consists of the following machines and equipment: 1. Raw Material Pre-processing Machines - Edge Runner Handle R469, year of manufacture 1955 - Roller Crusher AGW 1065/1085, year of manufacture 1963 - Roller Crusher WF 1080A, year of manufacture 2005 - Belt Conveyors, 4 units - Control cabinet 2. Forming Machines - Mixer Handle MDVG 920B, year of manufacture 1990 - Press Handle PZG 56A/50, year of manufacture 1990 - Cutter Keller type 4155, year of manufacture 1990 Hedpfxey Nzprj Am Aefh - Belt Conveyors, 4 units - Control cabinet This line was in continuous operation until the end of 2025. If you have any questions or require further information, please contact us by phone.

Condition: new, A complete pallet production line. Number/Pos Part no/Name/Quantity 1/OKKR-100/Opti-Cutter Magasin/L=3000mm/1 2/RON120/Block feeder carousel/1 3/OM-1500EL/Leg Machine/1 4/LP-OM/Leg positioning system/1 Hedpfxowduuds Am Ajfh 5/D-1000EL/Deck Machine/1 6/KTR-1006/Chain conveyor L=6000/1 7/GRG/Gantry Robot mechanical Gripper/1 8/SMS-1000EL/Assembly Machine/1 9/HKR/Automatic corner cutting machine/1 10/KTR-1004/Chain conveyor L=4000/1 11/ROB-G/Robot with mechanical gripper/1 Average capacity: 1500 pallets/8 hours (800x1200 mm pallet with max 6 deck boards) Maximum capacity: 1900 pallets/8 hours (800x1200 mm pallet with max 6 deck boards)

Condition: ready for operation (used), Complete Veneer production line. Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer Hodpfjtryf Ijx Am Aefh - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts

Condition: good (used), Year of construction: 1996, Rondo Compactline Bun Line - used - year of manufacture: 1995-96 - components: Compactline work table, calibrator, cutting station, moistening station, filling machine, roller, rolling station, guillotine, receiving table, 4 cutting rollers, 3 decorations - length: 7.70 m - stainless steel construction - manual control Hedpfx Ajyglg Uem Ajfh - machine from production - complete overhaul available on request - ex stock - price on request

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. Hfjdpfoq Auhdsx Am Aoh - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: good (used), Year of construction: 2008, I sell the complete set of machines for production of wooden dowels. Year: 1993 - 2008 Brusa di Garboli TA30 L.Loser AA200 Moulders Cutting machines with feeders Cylinder sanding machines Totally 10 machines. Hsdpfjt I U Amsx Am Asfh Suitable for dowels 6-8-10-12-16mm. Very good condition. Available immediately

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Hsdet Txfpopfx Am Asfh Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 Hfedpfx Aot Tw S Uom Aeh - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Hfjdpfx Asw Ahg Rom Aeh Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: reconditioned (used), functionality: fully functional, Stock No.: 2858 1 used, partially overhauled and function-tested compounding and pelletizing line, consisting of: Extruder Berstorff (Krauss Maffei) Type ZE 60 A - 34 L/D twin-screw co-rotating Extruder drive 160 kW AC Degassing with vacuum pump Hjdjy At Iaepfx Am Asfh Laser cutting head / melt filter Melt pump Eprotec Melt x10 ECON EUP 600 underwater pelletizer, complete with start-up valve water system granulate drying centrifuge >> 1 year PLASTICO warranty OPTIONAL for an additional charge: Material conveying system Gravimetric dosing units Granulate classification Pellet filling station for Big Bags or Octabins Additional compounding plants, pelletizing systems, gravimetric dosing units available from our Wuppertal facility. Visit us or send us your enquiry.

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Hodpfx Amoy Ai Hlo Ajfh

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 Hsdpfoya Eldsx Am Aofh • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW Hodpjxf Hm Ssfx Am Aofh

Year of construction: 2008, condition: good (used), A complete line for the production and packaging of fruit and vegetable juices. The line consists of machines: fruit-vegetable pulp milling and production line (MEGA bunker hopper, MEGA 2012 rotary sieve, MEGA 2008 batching rung elevator, MEGA 2008 brush dripper, roller inspection conveyor- MEGA 2008, 2017 screw conveyor, pulp impeller pump, pulp tank, belt press-FLOTTWEG 2008, rinse water tank-FLOTTWEG 2008, juice cooling system- STM 2018), packaging line (triblock arrow-STM 2014, buffer tank STM 2014, bottle orientator STM 2013, capping machine STM 2013, HITACHI printer 2016, labelling machine 2018). We also have a second smaller bottling and packaging line for sale. Hjdpfjpqxvxox Am Aofh

Condition: excellent (used), Year of construction: 2018, Weinig production line CONTUREX C 125, year of manufacture 2018 Hfodpfey Emrkjx Am Ash

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a UC Matic 15 window manufacturing line as well as a Weinig Powermat 500, consisting of the following main components: - Infeed automation - CNC machining center Unirex 2000 - CNC end-processing unit Unitec 15 - CNC longitudinal profiling machine Unicontrol 12 - Automatic double-part turn-over and return system - Outfeed buffer - Powermat 500 with automation The system is designed as an integrated production line for window and profile machining, enabling efficient and flexible manufacturing. Hfjdpfx Aex Sqxhsm Aeh The machinery will be dismantled by a specialized service provider. The costs for dismantling will be disclosed and are to be borne by the buyer.

Condition: used, Year of construction: 2006, machine/vehicle number: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Comes with an additional linear tool magazine (120 positions), 2 four-axis machining heads for simultaneous processing (20kW), automatic loading and unloading tables. Optionally, a comprehensive tool package is available (tool holders, angle heads, profile heads). Currently the machine is in continuous use. The machine was purchased in 2024 after a complete overhaul. Since then, it has operated for 15 months on a single shift. Technical specifications: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The max. working length is achieved by multiple transfer of the part in the clamp. Spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 1: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 Spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 2: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 External magazine: - Magazine type: linear - Magazine capacity: 120 tools - Holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Hfodoyu Sn Uepfx Am Ash Unloading table: automatic cross-feed CNC control: PLC: Siemens S7 Mobile control panel Control computer: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 The machine is in full working order and is currently in continuous production. For an additional charge, a comprehensive range of accessories is available: 8 angle heads, a package of 3 standard tool holders, and a package of 17 new arbors for heads.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Pallet production line by DREW-BET (KAROLEX) Operated by 3 people Capacity: up to ~200 pcs/hour Year of manufacture: 2013 – in very good condition Possibility of using uncut boards along the length, which significantly speeds up production. The line is equipped with two saws (longitudinal and cross-cut). The line includes: - Through-feed nailing machine - Longitudinal milling and trimming machine Hfsdpfxoy D Uchj Am Aeh - Corner trimming machine - Transfer table - Cross-cut saw - Flipper/rotator - Stacker - Magazine - Chain waste conveyor running under the entire line The entire line is fully functional and connected to power. Very quick dismantling and transport (fits on two trucks).