Used Emmegi Nanomatic 380 S for sale (71,095)

Condition: new, machine/vehicle number: 1e7fb50bfb3671204fb4d0b92, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Fine-grained steel welded construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: 1 x 20 feet in the middle without steel/checker plate covering in the rear area 2 x 20 feet or 1 x 40 feet with gooseneck tunnel without height adjustment at the rear and without folding center supports, no transport of containers without tunnel possible. 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnosis may occur, although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Attention: Transport of filled tank containers is excluded! Country of registration / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Lasdpfxoi Riv No Ancoa Frame DB 7350 nova gray 10-year warranty against rusting through Attention: Archive pictures!

Condition: used, mileage: 120,000 km, first registration: 10/1984, fuel type: gasoline, color: grey, gearing type: automatic, number of seats: 2, Equipment: ABS, air conditioning, central locking, Mercedes Benz 380 SL/Cabrio EX USA vehicle Newly restored New fenders/trunk lid etc.. Laedoudgm Ispfx Ancoa Alloy wheels Air condition Hardtop etc.....

Condition: new, machine/vehicle number: 1f4581c873ed977cb9602039b, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts: 1 x 20 foot centered (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container lock in the longer version 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Side collision protection Aluminum underride guard Half-shell mudguards with anti-spray flaps according to EG VA drip tray with 1 1/4 inch drain pipe + 1 1/4 inch stopcock, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between drip tray and side member 4 hose trays approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 outside + 2 x DN 160 centrally arranged, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) with rubber seal all round, with drain hole at lowest point, then without cover on hose pipes 1 stainless steel earthing lug at the rear in FR on the right of the frame, with international earthing sticker on the frame, Steps at the rear right on the underride guard, at the rear in FR right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide, Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Lasdpfx Ansi Rixkscsa Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of approval / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Approval according to ADR acc. to 9.1.1.2 of ADR, EX/II, EX/III / certificate of approval for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign at the rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Contour marking with refle

Condition: excellent (used), For sale: robust BT2 bench drill of industrial manufacture – a classic, very durable design from the era of the former GDR (East Germany). ✅ Condition: ✔️ Used ✔️ Fully operational ✔️ Shows normal signs of use (scuffs, scratches – visible in the photos) ✔️ Complete machine 🔩 Technical specifications: Model: BT2 Power supply: 380V / 3 phase / 50 Hz Power: approx. 1.1 kW Manufacturer: VEB Werkzeugmaschinenfabrik Saalfeld (GDR) Weight: approx. 180 kg Speed adjustment + manual feed ⚙️ Features: Very robust, heavy construction Stable operation – ideal for workshop and production use Easy to operate and service Exceptionally durable "workhorse" machine 📦 Included: ✔️ BT2 bench drill ✔️ Worktable ✔️ Drill chuck Laedpfxsyzum Ij Ancja 🌍 Country of origin: 🇩🇪 Germany (East Germany) ℹ️ Additional information: On-site inspection available Perfect for workshop, metalworking, or production Transport possible (pallet / shipment)

Condition: excellent (used), SEW Eurodrive RF73DT80N-4BM gear motor 0.75 kW 1380/31 rpm B5 with brake Ljdpfsywn Uksx Anceaa

Condition: used, Gearmotor SEW EURODRIVE RF77 DT80N4/BMG/TF 0.75kW 1380rpm IM M4 Lodpfsyv Uvrsx Ancjaa

Condition: excellent (used), For sale: Electric motor from German manufacturer Dietz Motoren GmbH Condition: Used, in good technical condition Motor is fully functional Laodpeyv Uvfsfx Ancoa Visible storage marks and rust present on the housing and flange Visual condition as shown in the photos Technical data Manufacturer: Dietz Motoren GmbH Model: FDR 132SB 2Q Power: 7.5 kW Speed: 2920 rpm Supply voltage: 380 V Current: 15.5 A Frequency: 50 Hz Protection class: IP54 Insulation class: B Duty cycle: S1 Approximate dimensions Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Ideal for pumps, fans, industrial machinery, and drives

Condition: new, For sale: professional electric motor from the renowned German manufacturer Bauknecht Antriebstechnik. The motor is brand new – ex-stock. It has never been used in operation and may have only minor storage marks visible in the photos. Robust, industrial-grade construction – ideal for demanding applications. 🔧 Technical specifications: Manufacturer: Bauknecht Antriebstechnik Model: 3~Mot 160M Power: 11 kW Lodjyv R Tgepfx Ancjaa Speed: 2930 rpm Voltage: 380 V Current: 22 A Frequency: 50 Hz Protection class: IP54 Insulation class: B Duty type: S1 (continuous) Cos φ: 0.88 Design: IMB5 (flange-mounted)

Condition: excellent (used), For sale: Professional TEMPEST DD21 positive pressure blower, commonly used by fire departments, industrial facilities, paint shops, warehouses, for emergency ventilation, and anywhere extremely high air flow capacity and reliability are required. The unit is fully operational, powerful, and ready for work. The motor and control panel are EX (explosion-proof / ATEX) rated—this is a premium device rarely available on the secondary market. ————— Technical data: • Brand / Model: TEMPEST Power Blower – DD21 • Manufactured in: Germany • Year: 1998 • Power supply: 380V / 3-phase (400V) • Controller: CEAG GHG 635 0510  – Ui: 690V  – In: 4.0–6.3 A  – EX version • Motor: VEM motors GmbH – Made in Germany – ATEX  – Power: approx. 2.5–3 kW  – EX class: EEx e II T3  – Speed: 2850 rpm • Certification:  – AMCA CERTIFIED (certified air performance)  – ATEX / EX (explosion-proof) • Robust steel frame with transport rollers • Large metal impeller with very high efficiency ————— General condition: The unit is well-maintained, fully functional, and from a professional facility. Typical signs of use, but technically and structurally in very good condition. ————— Applications: • Fire departments – positive pressure ventilation • Warehouses, industrial halls, paint shops Ljdexyugpopfx Anceaa • Extraction of smoke, dust, fumes • Machine and process cooling • Air purging during service work

Condition: good (used), Remark: The crash barriers may show scratches, slight dents dents or other damage. Included in delivery is: 01x crash barrier, used material color: yellow/black execution: full-walled total length: approx. 1.380 mm clear width: approx. 1.205 mm total depth: approx. 205 mm Lasdpfxonwnmys Ancja total height: approx. 350 mm material thickness: approx. 5,00 mm Number of drill holes: 04 pcs. Drill hole Ø: approx. 18 mm Weight | pc: approx. 33,820 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, mileage: 501,348 km, power: 279 kW (379.33 HP), first registration: 02/2013, fuel type: diesel, gearing type: semi-automatic, emission class: euro5, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, onboard computer, soot filter, Scania P380 refrigerated box 6x2 with central axle trailer – complete refrigerated train Tractor unit: Scania P380 refrigerated box First registration: 12/02/2013 Power: 279 kW (380 hp) Lodpfx Anoy Etc Aecjaa Displacement: 11,705 cc, diesel Refrigerated box with Frigoblock FK25SL Loading length: approx. 8,100 mm Gross vehicle weight: 25,000 kg Payload: 12,645 kg Trailer: Scheuwimmer central axle trailer Manufacturer: Scheuwimmer Type: FT 1119 First registration: 12/02/2013 Complete refrigerated vehicle combination, immediately ready for use Solid and reliable technology Ideal for distribution transport or export Errors, input mistakes and prior sale excepted Viewing possible by prior appointment at any time Further information gladly by phone or message.

Condition: used, Exterior dimensions: Diameter Ø 2500 mm, total height 6500 mm. Vertical, insulated stainless steel tanks – 4 pcs./identical Used 21,500 L, conical bottom with 3" outlet. Conical top with CIP. Insulated with 50 mm, completed with aluminium trapezoidal plates. Laodpouixi Eefx Ancja Cooling/heating jacket in the lower part of the cylinder. Brand: Gjettermann & Nielsen A/S AISI 316.

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Lajdpfx Aehqhw Iencsa Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm Lodpfoymnm Dex Ancjaa top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Applications: Lodpfsyc H Irjx Ancsaa • CNC machines • Injection molding machines, extruders • Production lines • Process cooling • Plastics, metal, chemical industries

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Lsdpfx Ajy Duzqjncjaa Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: excellent (used), functionality: fully functional, X axis travel (longitudinal axis): 4300 mm Y axis travel (transversal axis): 270 mm Z axis travel (vertical axis): 300 mm Electrospindle 1 HSD – max 18,000 rpm – power 5.5 kW Tool magazine capacity: 4 Angular head for lateral operations Number of clamps: 4 Lajdpoy Drzhefx Ancoa Automatic clamp positioning Weight: 1950 kg

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Frame discharge unit First milling module Q-MATIC 1 Lajdpfjxzzxbex Ancsa Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Second milling module (INTEGRA Q2) Q-MATIC 2 Line supervisor laptop

Condition: excellent (used), machine/vehicle number: XLRAT85XC6E716897, mileage: 553,915 km, power: 279 kW (379.33 HP), first registration: 04/2006, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2006, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good Laedpfx Aney Eng Necea

Condition: used, mileage: 205,057 km, power: 320 kW (435.08 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 16,200 kg, maximum load weight: 9,800 kg, tire size: 315 / 80 R 22.5 / 11mm, next inspection (TÜV): 01/2025, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, total width: 25,500 mm, front tire size: 315 / 80 R 22.5 / 11mm, operation weight: 26,000 kg, Equipment: air conditioning, crane,

Year of construction: 2018, condition: good (used), 4-axis machining center 4 pneumatic clamps with automatic positioning automatic tool change Lodpfx Asyr R Ibencsaa 2 pneumatic endstops software 3D camplus

Condition: excellent (used), mileage: 1,071,000 km, power: 280 kW (380.69 HP), first registration: 05/2006, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 12, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2006, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, power mirror, retarder, traction control, = Additional Options and Equipment = - 12-speed manual gearbox - 400-liter diesel tank - Aluminum fuel tank - Heated mirrors - Driver comfort seats - Differential lock - Differential lock - Speed limiter - Master switch - Hydraulic system - Tipping hydraulics - Radio/CD player - Sun visor - Power take-off (PTO) - Power take-off (PTO) - ZF Intarder = Remarks = NICE CONDITION SCANIA R380LA DAYCAB 4x2 TRACTOR UNIT, EURO 3, 12-SPEED MANUAL GEARBOX, RETARDER & HYDRAULIC KIT! 380HP, 6-CYLINDER ENGINE, EURO 3! 12-SPEED MANUAL GEARBOX! RETARDER! HYDRAULIC KIT! P.T.O.! SUN VISOR! ETC.! TRUCK IS IN GOOD WORKING / DRIVING CONDITION, READY FOR HEAVY-DUTY (TIPPER) APPLICATIONS! Laodpfx Aoxnqpvsncea MORE SCANIA 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE! (>75 TRUCKS/TRAILERS IN STOCK)! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION! () ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,640 cc Gearbox Transmission: GRS900 (12+2) speed manual gearbox, 12 gears, manual transmission Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Front axle: max. axle load: 7,500 kg; steered; tyre tread left: 50%; tyre tread right: 50%; suspension: leaf spring Rear axle: twin tires; differential lock; max. axle load: 11,500 kg; tyre tread left inside: 40%; tyre tread left outside: 40%; tyre tread right inside: 40%; tyre tread right outside: 40%; reduction: single reduction; suspension: air suspension Weights Unladen weight: 6,775 kg Payload: 12,225 kg Gross vehicle weight: 19,000 kg Functional Body make: SCANIA Condition Technical condition: very good Visual condition: very good Further information Please contact Sales Department or Erik Engel for more information.

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt length: 3,000 mm, conveyor belt width: 400 mm, total width: 550 mm, total height: 300 mm, overall weight: 55 kg, - Belt width 40 cm - Alligator coupling Please specify when ordering: - Motor 380 V + worm gear with oil filling or - Motor 230 V + worm gear with oil filling - Conveyor belt length 400 cm Ljdpfx Aoyuzi Usncoaa - Conveyor belt width 53 cm - Conveyor belt width with motor 60 cm - Conveyor belt height 22 cm - Conveyor belt height with feet 30 cm - Weight approx. 55 kg - Price includes delivery - Free shipping within Czech Republic, Slovakia, Germany, and Austria You can order accessories for this conveyor: - Narrow hopper – €190 - Wide hopper – €230 - Base + adjustable feet – €100 Please use email communication instead of calling. Thank you. Payment is made on delivery (with a 10% deposit in advance) or by transfer to our bank account. Dimensions of conveyor belts with extendable feet can be seen in the pictures.

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt length: 4,800 mm, conveyor belt width: 300 mm, total width: 500 mm, total height: 300 mm, overall weight: 70 kg, - Belt width 30 cm - Alligator coupling Please specify when ordering: - 380 V motor + worm gearbox with oil filling Ljdpfx Ansyuzrcjceaa or - 230 V motor + worm gearbox with oil filling - Conveyor length 480 cm - Conveyor belt width 43 cm - Conveyor belt width with motor 50 cm - Conveyor height 22 cm - Conveyor height with feet 30 cm - Weight approx. 70 kg - Price includes delivery - Free shipping in Czech Republic, Slovakia, Germany and Austria You can order accessories for this conveyor: - Narrow hopper – €150 - Wide hopper – €190 - Base + adjustable feet – €100 Please use email communication instead of calling. Thank you. Payment is due on delivery (with 10% advance deposit) or by bank transfer to our account. Dimensions of the conveyors with extendable feet can be found in the images.

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt length: 3,000 mm, conveyor belt width: 300 mm, total width: 500 mm, total height: 300 mm, overall weight: 50 kg, - Belt width: 30 cm - Alligator coupling Please specify when ordering: - 380 V motor + worm gear with oil filling or - 230 V motor + worm gear with oil filling - Conveyor belt length: 300 cm - Conveyor belt width: 43 cm - Conveyor belt width with motor: 50 cm - Conveyor belt height: 22 cm - Conveyor belt height with feet: 30 cm - Weight: approx. 50 kg - Belt thickness: 0.3 cm - Cleat height: 4 cm - Distance between cleats: 36–39 cm - Price includes delivery - Free shipping within Czech Republic, Slovakia, Germany, and Austria Lasdpfoyuzr Nex Ancja Accessories for this conveyor are available: - Narrow hopper – €150 - Wide hopper – €190 - Base + adjustable feet – €90 Please use email communication instead of calling. Thank you. Payment upon delivery (with 10% deposit in advance) or by bank transfer to our account. Dimensions of conveyor belts with extendable feet are shown in the pictures.