Used Electronic Modules Et 200S for sale (28,031)

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. Dksdjv Stfrjpfx Ab Tsp maximum thickness galvanized 0.8 mm. stainless steel 0.6 mm. straightening haul 5 shafts punching 5 units longitudinal edging cutting rolling touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100.

Condition: reconditioned (used), functionality: fully functional, Bucket Crusher UJ200 All hydraulic parts are revised Dodpfsyki Nhox Ab Tskp From STOCK Suitable with 20-25-28tons excavator

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 537 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface Dkodpfxjxaalko Ab Top - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: excellent (used), Cutting height 42cm-56cm Djdpfov Euraex Ab Tokp Cutting width 20cm-40cm Engine 20 HP Belt width 110mm Belt length 6520mm

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters, and diagnostic data to the controller. For connecting up to eight IO-Link devices. Two Ethernet ports with integrated switch. Integrated web server for configuration and diagnostics. Simultaneous data exchange with the controller and the IT environment. Technical data: Application area Application: I/O modules for use in the control cabinet. Electrical data Operating voltage [V]: 18...30 DC Nominal voltage DC [V]: 24 Max. power consumption [VA]: 2.4 Total current load [A]: 2 Inputs/Outputs Total number of inputs and outputs: 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs: 18; (8 x 2 + 2 x 1) Input circuit digital inputs: PNP Voltage supply [V]: 24 Max. total current load inputs [mA]: 1600 Input current limitation [mA]: 200 Short-circuit protection digital inputs: yes Short-circuit resistance digital inputs: yes Overload resistance digital inputs: yes Outputs Number of digital outputs: 10 Circuit: PNP Current load per output [mA]: 200 Short-circuit protection: yes Galvanically isolated: no Actuator supply of the outputs: 24 V DC Interfaces Communication interface: IO-Link Ethernet Transmission rate: 10; 100 Protocol: EtherNet/IP; Modbus TCP IO-Link Master Transmission type: COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision: 1.1 SDCI standard: IEC 61131-9 Number of Class A ports: 8 Environmental conditions Ambient temperature [°C]: 0...70 Storage temperature [°C]: -20...70 Max. permissible relative humidity [%]: 95 Protection class: IP 20 Approvals / Tests Shock / Vibration test: EN60068-2-6; EN60068-2-27 Mechanical data Weight [g]: 404.5 Dimensions [mm]: 105.3 x 45.2 x 113.6 Materials: Housing: PA Indicators / Controls Display: Switching state: LED, yellow Operation: LED, green Error: LED, red Function: LED, yellow Djdpfx Absh N U Sus Tskp Remarks Packaging unit: 1 piece Electrical connection Screw terminals: ; Pitch: 20 mm

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: RET0600 0001, discharge height: 2,600 mm, power: 0.8 kW (1.09 HP), fuel type: electric, Equipment: type plate available, Bin tipping chassis: - 600 kg bin - 2.6 m dump height Dkedpfx Absv Tlf Te Top - equipped with a hydraulic pump - CE material

Condition: used, Used machine Dkedpozknf Tjfx Ab Tsp Equipment and technical data: - Film material: LLDPE - Film width: 500 mm - Max. roll diameter: 250 mm - Max. film thickness: 35 µm - Roll core diameter: 76 mm - Max. pallet length: 1675 mm - Max. pallet width: 1675 mm - Max. pallet height: 2200 mm - Max. pallet weight: 1500 kg - With access ramp - Dimensions: approx. 3000 x 2000 x 3200 mm - Weight: approx. 750 kg Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), Description to follow! Dsdpezkl Dmsfx Ab Tskp

Condition: excellent (used), Description to follow! Djdpfxozkl Dge Ab Tekp

Condition: excellent (used), Description to follow! Dkedpfozkl Daex Ab Tsp

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid Dkedpszi Sdwjfx Ab Top

Condition: new, new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable Dkodpfjzi Sdqex Ab Tjp CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, Used Siemens SIMODRIVE 611 power module with control unit for CNC and servo applications. Manufacturer: Siemens Series: SIMODRIVE 611 Product type: Power module / control unit Djdpjzi Dydsfx Ab Tekp Power module model: 6SN1123-1AA00-0CA1 Control model: 6SN1118-1NH00-0AA2 System: SIMODRIVE 611 Application area: Machine tools Mounting type: Control cabinet Cooling: Air cooling Condition: Used

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Dkjdpey Hkgbefx Ab Tjp Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing Dodpfx Absy Hkd He Tjkp - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine Djdpfxezinlwo Ab Tjkp - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Year of construction: 2024, condition: used, machine/vehicle number: 2333470, Thermal reactor Dedpsziltrsfx Ab Tekp

Condition: used, functionality: fully functional, Kannegiesser Article number 0541540 Dodpfx Abjy Ug Dfo Tekp Channel 1 MDI/MDIX

Condition: used, Krauss Maffei SE502 MC4 sequence controller- removed from KM 18 C3 Dksdpfx Aerr Eh Aob Tjp - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SE502 spare part no.: 5 Dition: gebraucht

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SR500/310 Dkjdpfsrr Ehqex Ab Top spare part number: 5 Dition: gebraucht

Condition: used, Krauss Maffei IPC 5-133 for MC4 control system- removed from KM not testedmanufacturer: Krauss Maffei spare part no.: 5 Dition: gebraucht Dkedpfx Absrr Egwo Tsp

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: 1pc. electronic segmented pad Dodjzkmdhepfx Ab Tskp 1pc. electronic segmented pad Working width 1350mm Pressure rollers for short elements. Air-blow on both units. Total weight 3050kg Condition very good. Available immediately.

Condition: used, Automatic feed via Elgo control E 255 Dkodpfx Abeywxwps Top For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 68 h, spindle motor power: 22,000 W, spindle speed (max.): 3,300 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, overall weight: 16,600 kg, controller manufacturer: MAZATROL, number of axes: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details. • Operating time: Approx. 68 hours • Availability: Immediate • Key capabilities: • Full 5‑axis simultaneous machining • Main spindle + second spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and working range • Max swing: Ø658 mm • Swing over cross slide: Ø658 mm • Max machining diameter: Ø658 mm • Max machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (second spindle): Ø65 mm • Max support mass (main spindle): 650 kg • Max support mass (second spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor output: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blow system: Included • Additional configuration: Heavy‑duty HD1 spindle; removal of standard spindle cylinder and chuck • Second spindle (HD2) • Chuck size: 8" • Max speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor output: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s Dkodpfx Asy Sltgjb Top • Factory option: HD2 spindle synchronization function • Milling spindle • Max speed: 12,000 rpm • Motor output: 24 kW • Cooling: Oil & air • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: Tool breakage detection in magazine; Overload detection • CNC functions and software • 5‑axis machining function package • Tool radius compensation for 5‑axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous tapping with milling spindle • Cooling and preparation • Through‑tool coolant: 7 MPa • Preparation for oil mist extraction system • Highlights • Practically new condition with only ~68 operating hours • Very rich factory configuration • Full 5‑axis simultaneous machining • Main and sub‑spindle configuration • 72‑tool CAPTO magazine • Production‑ready with significant savings vs. new Additional equipment • Chip and parts handling • Side chip conveyor – Consep type • Belt‑type parts conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder • Bar feeder interface kit • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70‑V‑I‑R‑FM • Year: 2018 • Other accessories • Machine mounting anchors • 3‑color machine status signal lamp Technical Specification Counter Spindle Yes Driven Tools No Taper Size Capto C6

Year of construction: 2001, condition: used, Manual length adjustment via handwheel with digital display Dkedszh Iucopfx Ab Tjp For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Pneumatic parking brake