Used Doosan Dv160S-9 for sale (18,809)

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Gedpfxexq R Eve Ak Usug Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, Godpsylbpvsfx Ak Uoug spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket Gjdpfx Akeyyy H Rs Ueug - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm Gujdpfxjv Hyf Ue Ak Ujg A: 1550 mm Left/right spindle: Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN iTNC-530, controller model: iTNC-530, spindle speed (max.): 10,000 rpm, spindle motor power: 22 W, BRAND: DOOSAN MODEL: VM-640 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 11/2010 CNC CONTROL: HEIDENHAIN ITNC-530 MACHINE WEIGHT: 9,000 kg MACHINE DIMENSIONS: Length: 4,200 mm; Depth: 2,800 mm; Height: 2,900 mm Spindle Taper size: ISO-40 Spindle speed: 12,000 rpm Gsdpfsxxlfyjx Ak Uoug Spindle motor power (cont./30 min.): 18.5/22 kW Working Capacity X axis: 1,300 mm Y axis: 650 mm Z axis: 625 mm Distance spindle nose – table surface: 150 ÷ 775 mm Table Table dimensions: 1,400 x 650 mm Maximum table load: 1,000 kg Feed Rates Rapid traverse (X / Y axes): 36,000 mm/min Rapid traverse (Z axis): 30,000 mm/min Working feedrates (X / Y / Z axes): 1 ÷ 15,000 mm/min Tool Changer Tool taper: DIN 69871 – A40 Shank: DIN 69872 – A40 Tool magazine capacity: 30 stations Max. tool diameter (adjacent stations full/empty): Ø 90 / Ø 150 mm Max. tool width: 300 mm Max. tool weight: 8 kg Other Equipment Chip conveyor Coolant tank with wash pumps High-pressure coolant pump through spindle Spindle line air conditioning unit Transformer Manuals, Electrical Schematics, and CE Declaration The following maintenance has been performed on the machine: - X axis ballscrew overhauled and bearings replaced - Geometry recovered with hand-scraping of Turcite on X/Y axes - Complete internal repaint and Lexan replacement - Complete overhaul of X/Y/Z axis telescopic covers - Lubrication system overhauled

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Godpfjyugvaex Ak Ueug Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm Guodpfx Akszvq Dpo Ujg --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Gsdjx Sq Uvepfx Ak Uoug Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: used, Year of construction: 2017, operating hours: 7,480 h, Equipment: air conditioning, Year of manufacture: 2017 Gjdpfxey Nwuke Ak Uoug Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 348 cm Digging depth: 4.4 m = Additional options and accessories = - Central lubrication - Rubber tracks

Condition: like new (used), functionality: fully functional, fuel type: diesel, overall weight: 21,000 kg, empty load weight: 21,000 kg, operation weight: 21,000 kg, Year of construction: 2022, operating hours: 60 h, Used Doosan DX210W Adjustable boom Central lubrication Air conditioning Camera 3rd hydraulic circuit Tyres Woody 60 harvester head The machine was temporarily used for sorting round timber. Condition like new. Sale on behalf of customer. Guedpfx Akoyyk Hhj Ujg

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! Guodpfx Ajyxkucsk Usg We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof = Further information = Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: used, machine/vehicle number: 26411, Year of construction: 2013, operating hours: 5,486 h, load capacity: 2,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,635 mm, Equipment: cabin, sideshift, .: 26411 Gusdpfx Aoyu Tk Dek Ujg Machine details: Year of manufacture: 2013 Load capacity: 2,500 kg Lifting height: 3,950 mm Indicated operating hours: 5,486 h Mast type: Standard Mast height: 2,635 mm Length/Width/Height: 2,500 / 1,160 / 2,210 mm Operating weight: 4,200 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Side shifter * Fork positioner * Load backrest ---- Further machine information: ---- The stated operating hours are generally read-off hours. We are happy to offer you suitable transport. An additional 250–300 forklifts, attachments, and sweepers are immediately available for you. Rentals also possible! We are happy to buy your used machine. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For trade buyers, the machine is sold as-is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec • Documentation: Instruction manuals and CE declaration of conformity included Additional equipment • D'Andrea TRM/50 boring head attachment Guedpfx Aoy Uwzbsk Ueg • Gerardi vise (345 × 120 mm) • Chip conveyor system Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2012, weight max. in kg 1500 kg serial number FGA04-1290-00480 drive Treibgas weight 2800 kg Gusdpfoztfyyex Ak Uog length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW cubic capacity 1.975 cm³ ccm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 540 mm Swinging diameter over compound slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 26 m/min Gusdoy Tw Ulspfx Ak Uog Rapid traverse Z-axis: 36 m/min Power of spindle motor: 22 W Spindle speed, main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed, milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: used, Year of construction: 2008, functionality: fully functional, turning length: 230 mm, turning diameter: 410 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 230 mm, Doosan PUMA H-310/TM CNC horizontal lathe, year 2008, equipped with FANUC Series 18i-TB control, ideal for precision machining of medium-sized workpieces with dual turret machining capability. Main technical specifications: Maximum turning diameter: Ø 410 mm Maximum turning length: 230 mm Recommended turning diameter: Ø 255 mm Maximum distance between spindle centers: 500 mm Axis travels: X: 210 mm Z: 230 mm Rapid traverse X/Z: 24,000 mm/min Main spindle: Chuck: Ø 250 mm Spindle nose: ASA A2-8 Speed: 3,500 rpm Power: 15/18.5 kW Gusdpjwt S Ugjfx Ak Uog Turret system: Number of turrets: 2 Stations per turret: 12 Driven tools: Speed: 3,000 rpm Power: 4 kW Tool dimensions: 25x25 mm (turning) / Ø 40 mm (boring) Included accessories: Chip conveyor Coolant tank with washing pump External high-pressure pump Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Compact, versatile, and high-performance machine, perfect for multitasking machining in high-efficiency production environments.

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm -Z750mm 1-degree pallet indexing 60 tools Chip conveyor Guedpfx Akoycvpfe Ujg Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, Gedpozg Eb Djfx Ak Ujug 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: H2017, load capacity: 20 kg, arm reach: 1,700 mm, The Doosan H2017 is an advanced collaborative robot (cobot) that combines high performance with maximum safety and precision. With a lifting capacity of up to 20 kg and a reach of 1,700 mm, the H2017 is ideal for heavy-duty and large-scale applications across industries such as manufacturing and logistics. The robot features six integrated high-performance torque sensors, ensuring exceptionally precise motion control and safe human-robot collaboration. This technology makes the H2017 particularly suitable for tasks that require both strength and sensitivity – for example, palletizing, machine tending, assembly, and handling of heavy goods. Advantages of the Doosan H2017: • ✅ High payload capacity (20 kg) – ideal for heavy lifting • ✅ Extended reach (1,700 mm) – greater flexibility and coverage • ✅ Six torque sensors – allows precise, stable, and safe collaboration • ✅ Intuitive programming – rapid deployment and start-up • ✅ Advanced safety features – compliant with international standards • ✅ Robust and reliable construction – engineered for industrial environments Ideal for: Godox Sv Rpspfx Ak Uoug • Palletizing and depalletizing • Machine tending • Assembly and joining operations • Intralogistics and material handling • Automation of manual or ergonomically challenging processes With the Doosan H2017, you get a future-ready cobot that boosts productivity, reduces employee workload, and delivers consistently high quality—every time. _____ Availability We offer ‘as new’ Doosan H2017 units for sale—still sealed in their original packaging. Additionally, we also supply used Doosan H2017 units at a reduced price, providing a cost-effective solution for those seeking premium quality at a lower investment. Please contact us for pricing and lead times.

Condition: used, Year of construction: 2015, operating hours: 5,130 h, Year of manufacture: 2015 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = Godpfettzn Tex Ak Uoug - Central lubrication

Condition: excellent (used), Year of construction: 2015, DOOSAN G30 Generator Set – Machine after full service! Technical data: Power: 31 kVA (25 kW); Year of manufacture: 2015; The generator is fully operational, ready for work, with warranty. Net price: PLN 26,500 Gsdpsylifrofx Ak Ujug Gross price: PLN 32,595 Below you will find a link to a video showing the machine in operation.

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Gedsxm Sxvopfx Ak Ujug Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: excellent (used), power: 141 kW (191.71 HP), overall weight: 25,100 kg, Year of construction: 2017, operating hours: 7,862 h, Equipment: air conditioning, DOOSAN DX235LCR-5 Year: 2017 Godjzvbhfopfx Ak Ueug Operation hours: 7.862 hrs ROPS Radio back- drive camera Airco Hydr. 2 piece boom Stick : 3m central lubrication all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 70/55 quick coupler 1x Bucket with 800mm width U/C: 70% good trackshoes 600 mm width engine with 141.2kW CE Operation weight: 25.1 to.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, turning length: 1,540 mm, turning diameter over cross slide: 1,000 mm, turning diameter: 670 mm, spindle motor power: 30 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, rotational speed (min.): 60 rpm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​7-axis multitasking CNC turning center “DOOSAN model PUMA MX3100S” with orientable upper head equipped with tool changer, opposing spindles and Fanuc 31i-MB5 CNC. Guedpfswdg Atjx Ak Usg

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 31i-5, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm; ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW Guodpfx Akezt Rwqo Ujg • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s