Used Digestate Dryer for sale (1,740)

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. Bwjdpfxofz U Hvs Afgou The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 1998, condition: used, dryer dry-air KOCH CKT 1000 1000 m³/h year: 1998 price: 10.900 € contact: Mr. Rainer Eckerle Bsdeity Adjpfx Afgewu

Year of construction: 1998, condition: used, dryer dryair Simar (art.2236) Bwodpfx Afeiicxmegju Simar dry air dryer Simar KT 100 2x 75 kg Tank year 1998 price: 4200 € Contact: Mr. Rainer Eckerle

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. for sale brand new dryer old stock (2019) includes two brand new filters. capacity : 324 M3/H height : 1285 mm width : 620 mm depth : 571 mm Bedpfx Aju Rpg Tsfgswu weight: 165 kg connection: 1" 1/2 tested and ready for use.

Condition: excellent (used), Year of construction: 2014, ABD ERD 1008 REFRIGERATION DEHUMIDIFIER CAPACITY 16.8 m3/min, Bwedpfx Aevfuqpsfgeu PRODUCT YEAR. 2012 DEHUMIDIFIER FULLY OPERATIONAL.

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer Bwodpfx Aeu D Arijfgsu If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Motan dryairdryer LS 250 15 KW LBSuE 900 Liter Tank year 2010 Bjdsq Tb Dqepfx Afgjwu price: 12.500 € Contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2003, machine/vehicle number: 3101, Kaeser TD51 Refrigerated air dryer Serial: 3101 Bwjdpfx Aoqqhkpjfgou 2003, Refrigerant R34A, 18Bar

Year of construction: 1993, condition: used, machine/vehicle number: 0356-12T-037-345, Cooling air volume: 250 m³/h Heat output: 965 W Compressed air inlet temperature: +35° Compressed air outlet temperature: +27° Volume flow rate: 75 m³/h Bwedpjdnzp Ijfx Afgju Operating pressure: 7 bar Maximum operating overpressure: 15 bar Compressed air connection: R 3/4" Condensate separator, capacity: 0.5 l Condensate volume at rated load: 316 g/h Electrical connection: 220 V Weight: 105 kg Space requirement: 870 x 560 x 620 mm

Condition: used, dryer dryair AZO LE 200, 200 m³/h, price: 3.950 €, contact: Herr Rainer Eckerle Bwodoycrujpfx Afgeu

Year of construction: 2020, condition: new, Hopper Dryer FASI CHD-50T, d=430, H. 1140mm, 50kg, 3.9kW, NEW Bedpfxev Nkcvj Afgjwu

Condition: excellent (used), Year of construction: 2005, ATLAS COPCO CD170 Adsorption Dryer Serial number: AII801294 S014387 Bodpfxezl Uhdj Afgowu 11 bar Year of manufacture: 2005 6.12 m3/min NEW FILTER CARTRIDGE!

Condition: excellent (used), functionality: fully functional, ATLAS COPCO CD 80 adsorption dryer Bwsdpfx Afjzm Ip Rjgsu Technical specifications: capacity: 4800 l/min; dryer is in fully working condition; net price: 3500 PLN gross price: 4305 PLN

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used Bwodpfxey Spnue Afgsu for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Rated speed : 2970 n/min Motor rating : 430 kW

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Bwjdpfxey Ny U Ts Afgou

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) Bodpfx Aezg Dx Ujfgewu - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Bjdpfsz E R Dxjx Afgswu Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Year of construction: 2007, condition: used, Screw compressor with refrigeration dryer - Manufacturer: Boge Bwsdpfx Aez Hm Rksfgju - Model: C9 - Year of manufacture: 2007 - Max. pressure: 8 bar - Max. air flow: 1,180 m³/min. - Motor power: 7.5 kW - Width x depth x height: 480 x 987 x 1,234 mm - Volts/Hz: 400/50 - Weight: 210 kg Refrigerated dryer - Boge Ultratroc - Type. SD 0050 AP - max. 16bar - Location: Warehouse, D-32825 Blomberg

Condition: used, kW: 30 Rotor diameter: 500 mm Rotor width: 1200 mm Bsdpfxjz Hxf Hj Afgswu

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Bjdpet S Efgofx Afgowu Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2003, 7 units of MOTAN Material containers for dryers 200 liters Heating units Year of manufacture approx. 2093 Bsdpfx Afsfwx Ebogjwu The containers have their own temperature control 8 units available Available: 7 units

Condition: like new (used), Two like-new soundproof enclosures, each housing two Busch pumps, are for sale. These enclosures are manufactured by Koch Technik. Price per unit: €950 If both enclosures are purchased together, the total price is €1,600. Bwjdpjy Tt Dpofx Afgsu The original invoice from Koch is attached in the documents below.

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, overall weight: 475 kg, total length: 1,890 mm, total width: 720 mm, total height: 1,600 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 110 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Hertz HGS F 15 Compact (10 bar) screw compressor Delivery volume: 2.2 m³/min - Energy-efficient IE3 motor with star-delta configuration - 500-liter compressed air tank - AD2000 certificate - Integrated refrigerant dryer - Pre- and post-filters - Condensate drain - Digital control system Logic 9 Bwjdswum N Ispfx Afgeu Upon request, the compressor can be delivered within a 200 km radius of our company headquarters (unloaded). Delivery costs upon agreement.

Year of construction: 2007, condition: good (used), Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood Bsdpfx Ajb Uhnqjfgswu -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Additional information • Axes: 2 • Effective Cutting Area: 1500 x 3000 mm • Maximum Cutting Thickness: up to 50 mm • Rapid Travel Speed: 4000 mm/min • Maximum Cutting Speed: 3000 mm/min • Control: KOIKE D420 • Control Functions: Rotation, mirror, nesting, recovery, piercing point selection • CNC Display: 7” color, multilingual • Data Input: USB / MDI • Program Format: EIA • Software: KOIKE PNC-CAM Expert V2E + FastCAM license • Preinstalled Cutting Patterns: 47 shapes • CAD Import: DXF, DWG • Auto Nesting / Sequencing: Yes • Motors: Stepping motors (X/Y), DC motor for torch lifter • Input Voltage: 1~ 200–240V, 50/60 Hz • X/Y Drive: Rack and Pinion, linear guides • Torch Holder: Ø35 mm • Initial Torch Height Control: Yes • Torch Collision Protection: Yes • Arc Voltage Height Control: Yes (1:1 or 50:1) • Plasma Source: Kjellberg CutFire 100i (100A) • Mains Voltage: 3~ 400V ±10%, 50 Hz • Power Consumption: 16.6 kVA (100% duty cycle) • Cutting Current: 35–100 A • Duty Cycle: 100% at 100 A • Cutting Range: 1–20 mm (recommended), max. 40 mm • Piercing Thickness: up to 20 mm • Open Circuit Voltage: 330 V DC • Efficiency: 0.92 • Power Factor: 0.97 • Cooling: Air cooled (built-in fan), torch gas cooled • Gas Supply: Air, 5.5 bar, 220 Nl/min • Protection Class: IP21 • Weight: 50 kg • Dimensions: 710 x 280 x 590 mm • Plasma Source • Control Unit • Laptop with FastCAM license • Plasma Table 3000 x 1500 mm (4 suction chambers) • Ventilation Unit with Outlets • Hoist – 500 kg Lifting Capacity • Piston Compressor 5.5 kW, 270 L, 10 bar Bwedpfxox D Nhvs Afgeu • Air Dryer 1500 L/min • Lifting Magnet and Sheet Gripper • Nozzles, Electrodes, and Spare Parts