Refrigeration dryer compressed air

Kaeser TD51

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Blsdpfx Aajulkvdjfsc

Condition: used, ALREADY DISMANTLED ‼️ IMMEDIATELY AVAILABLE ‼️ 🔥 Gilles 300 kW Wood Chip Boiler for sale – reliable industrial biomass technology! 🔥 Industrial-scale heating solution with Austrian precision! The Gilles 300 kW boiler is the ideal choice for large facilities, sites, grain dryers, or central heating systems. Key features: 🌲 Fuels: wood chips, pellets, biomass – wide fuel variety ⚡ 300 kW heating capacity – reliable and efficient for heavy-duty users 🔄 Automatic feeding, combustion control, ash removal – minimal personnel required 🧠 Modern control system, optimized combustion ♻️ High efficiency, low emissions 🇦🇹 Gilles = Austrian quality, industrial reliability 💥💰 PRICE: 9,900 EUR – GOOD CONDITION, READY FOR INDUSTRIAL USE! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Industrial boilers, biomass solutions, experienced and competent. Bledsp Am Rgspfx Aafec

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Bljdpoq Dzkuefx Aafec Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs Bledpfsignt Uox Aafoc - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Blsdpfxog A Hcus Aafsc

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit Bjdpfxjidi Ivo Aafslc - Ionization

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm Bodpfjh U Damox Aafjlc spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Year of construction: 1997, condition: excellent (used), machine/vehicle number: GO 832 833, Demag ELKE crane canopy crane track bridge crane hall crane Bedpjum I Akefx Aafelc 2x available!!! Payload / lifting capacity 1.6 to 1600 kg Track 11785 mm, external dimensions approx. 12000 mm Year of manufacture 1997 with floor control Lifting height 3 m Height from top edge of crane girder to bottom edge of hook approx. 900 mm Head girder length approx. 200 cm Crane is dismantled and immediately available Matching busbars can also be supplied. Please enquire Very good condition, inspection book is available Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire by postcode Pickup preferred

Condition: used, functionality: fully functional, saw band length: 5,550 mm, saw band width: 80 mm, type of input current: three-phase, cutting height (max.): 400 mm, table width: 1,060 mm, table length: 800 mm, working height: 400 mm, input voltage: 400 V, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system Bledpfx Aajw H Rq Hefoc

Condition: new, Bernardo frame saw Topcut 3200 ER Technical Specification Table dimension 1100 x 735 mm Format table 3200 x 400 mm Trimming length 3200 mm Max saw blade diameter 400 x 30 mm Max cutting height 90° / 45°125 / 88 mm Cutting width at the parallel stop 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Boom table with roll 1240 x 860 mm Speed Main saw blade 3000 / 4000 / 5000 rpm Speed scoring saw blade 8000 rpm Scribble saw blade 120 x 20 mm Suction connection of 100 mm Engine power S1 100% 5.5 kW (7.5 hp) Engine recording power S6 40% 7.5 KW (10.0 hp) Scoring motor power 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Delivery • Electric saw blade height adjustment • Digital cutting height display • Saw blade cover with inlet roller • Miter stop • Eccentric tensioner • Table widening • Extendable telescopic stop • Longitudinal stop flaps • Boom table with roller • Sliding stick • Scoring unit with independent motor • Operating tool Properties • High-torque drive motor (5.5 kW) powerful drive motor, designed for optimum cutting performance • Smooth-running double roller trolley with center and end position locking for precise cuttings • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Boom table with roller for simplified handling of larger workpieces • Foldable parallel stop with mik Bodpfod N S T Dsx Aafolc