Used Copy Router Rotox for sale (906)

Year of construction: 2013, condition: used, Membrane press table Manufacturer: Columbus Type: Vacuum forming Year of manufacture: 2013 Technical data - Working area: 1980 x 1350 - Must be connected to an external vacuum pump Tjdpfxjzuz Eho Aqtsc Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Dust extraction system Manufacturer: Spänex Type: Year of manufacture: Technical data Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding. Tjdpozu Alpofx Aqtsc

Year of construction: 2018, condition: used, Compressor with refrigerant dryer Manufacturer: Boge Type: S 111-4 Year of manufacture: 2018 Technical data - Volume flow: 17.10 m³/min - Final compression pressure: 10 bar - Motor speed: 1490 min-1 - Motor power: 110 + 3 kW Refrigerant dryer Manufacturer: Boge Type: DS220 Year of manufacture: 2017 Note: Tedjzu Alvepfx Aqtjc The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding. Todpjzu Al Aofx Aqtoc

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Todpfx Aqozuyl Totjc Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Tsdpfx Aqjzuymkjtec Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1985, Folding system Note: The system has been refurbished and received a new control system in 2013! Folding system consisting of: Lifting table with pusher Roller conveyor Infeed Transfer system and workpiece pre-cleaning Double-end profiler Manufacturer: Homag Type: FG63 Year of manufacture: 1985 Technical data - with adhesive strip application - Machine for profiling and folding the edge strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding the pre-folded workpieces - Sliding shoe for pressing - Extraction table for material removal Electric scissor lift table Manufacturer: Altek Year of manufacture: 2014 Technical data - Load capacity max. 1000 kg - with attached roller conveyor - Dimensions approx. 3100 x 1000 mm Tsdpfszuynzsx Aqtoc - with height measuring device for automatic detection of stack height and corresponding cycle time Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Tsdpfx Aqozuy A Sstsc Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, number of ink cartridges: 6, number of print heads: 1, paper width (max.): 914 mm, HP DesignJet T930 is for sale, fully operational and in excellent condition. Upon sale, we will replace the printhead to ensure the printer is in perfect working order. Tjdozz Hy Rjpfx Aqtsc There are two machines available, and they can be sold either together or separately. Please do not hesitate to contact me should you require any further information or clarification. Kind regards, Christos Konstantinou

Condition: used, Year of construction: 2002, for coils and strip material from 0.4 - 15 mm max./min. board thickness 60/6 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication blocking roller for shortest workpiece sequence safety/noise protection hoods central dust extraction connection, D = 160 mm, join milling cutters, D = 120 mm chip collection box, D = 100 mm equipped with: > Join milling cutters 1961 incl. DIA tools > memory-programmable screen control unit SPK 18000 (color screen) > Automatic edge magazine 1901 for coils and strip material > Glue station 1906 for cartridges + granules, including sensing nozzle > Pressing unit 1926, motor-driven > Saw hoods 1918 > Edge trimming unit 1920 > Radius cutter 1929 incl. chip collection box, pneumatic adjustment (separate for top and bottom) > Profile milling unit 1934 for longitudinal processing and corner copying (bottom + front edge) > Profile milling unit 1933 for longitudinal processing and corner copying (top + rear edge) > Flat cutter 1964, controlled by the application > Deburring unit 1944, incl. immersion control > Spraying device 1856 at the infeed and outfeed > Feed rate 12/16 m/min Tsdpfsz Abppsx Aqtoc > Motor-driven bridge adjustment > Infeed guide, motor-driven Length 7600 mm Width 1300 mm Height 2000 mm Weight 2800 kg

Condition: used, Year of construction: 1993, Coating application machine Manufacturer: Bürkle Tedpfx Asz A S Nqjqtoc Type: DHL1-1300 Year of manufacture: 1993 Technical data Working width: 1300 mm Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Year of construction: 2008, condition: used, UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Working width: 1300 mm - Feed rate: 5 m/min - Control range: 2-10 m/min - Working height: 920 + 20 mm - Special pass-through height in UV operation: 150 mm - Pass-through height without UV operation: 200 mm - Workpiece dimensions: 300 x 50 x 10 to 2600 x 1300 x 150 mm - Coating media: Water-based and solvent-based coatings, UV clear coats and pigmented coatings Tjdez A S Itspfx Aqtec - Infeed conveyor belt - 4 UV drying lamps (1 bottom, 3 top) - Mounted on 2 belt conveyors from Venjakob Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2004, condition: used, Intermediate transport system Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Note: Tjdpfx Aez A S Iyjqtec The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Killinger copy lathe with mechanical tracing Centre distance 1200/1500 mm Copying length 1100/1400 mm Centre height 250 mm Motor power 1.5 kW Manual feed Speed 2800/1580/870/670 rpm Todpfx Aqjwuxpajtec Space required 2080 x 750 x 1150 mm Weight 350 kg Year of manufacture 1990 Price 3000.-

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and Todpfx Ajz Df Txoqtjc rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, Year of construction: 1991, Strip cutting system Strip cutting system consisting of: Alphamatic vacuum loading system with 4 roller conveyors Feed system to the crosscut saw Crosscut saw with vacuum workpiece clamping Further transport to the ripsaw Ripsaw Manufacturer: Holzma Type: HPP81-3200 Year of manufacture: 1991 Technical data - Modified in 2019 Extraction conveyor belt Longitudinal roller conveyor with longitudinal measuring system Automatic labeling system REA JET Tedpfx Aqozuy Nrotoc Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Schneider SK D 2 twin-spindle table router for the precise machining of solid timber and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different router bits without any changeover times. Ideal for a wide range of routing tasks in window, door and furniture manufacturing. Technical data: - Motor, each: 4.5 kW - Spindle diameter: 30 mm - Spindle centre distance: 600 mm Todpfx Aozryrzoqtjc - Speed settings: 3000/4000/5000/6000/8000/10000

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (software IMAWOP) Max useful working area (without edge banding process) mm 6100 x 2000 x 125 Max useful working area (edge banding process) mm 3100 x 1925 x 100 (panel thickness) No. 10 movable rails (supports) 6 x length mm 1400, + 4 x length mm 1450 LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pump, capacity 140 m3/h) Clamps for workpieces fixing Safety side metal grids and front emergency carpets Motorized carpet to evacuate chips and wastes Separate electric and command cabinet No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Banding group on board - (Y AXIS) Todez Dtudjpfx Aqtoc Glueing Unit (P.U.R. Glue + Quick Melt unit) VT 100/100 with NORDSON premelter Edge coils supporting unit (No. 2 reels) OPTIONALS: N° 1 Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles N° 1 Circular saw (diam. mm 200) N° 1 Combined unit: Corner rounding / Edge scraping (with glue scraping extension)

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm Todpfx Aqoy Encwjtsc If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: used, Year of construction: 2009, functionality: fully functional, cutting width (max.): 297 mm, cutting length (max.): 420 mm, working width: 2,680 mm, input voltage: 400 V, input frequency: 50 Hz, BIELOMATIK A3 / A4 CUT-SIZE PAPER SHEETING & AUTOMATIC REAM WRAPPING LINE High-capacity, fully automated A3 and A4 copy paper sheeting and packaging line manufactured by Bielomatik (Commissioned in 2009). Engineerd for high-precision cutting, hole punching, and continuous ream packaging for office and printer paper production. TECHNICAL SPECIFICATIONS & FEATURES: Tedpfx Aqez An Tujtec - Manufacturer: Bielomatik - Year of Commissioning: 2009 - Machine Layout / Pocket Configuration: 2x4-Pocket (Dual-stream 4-pocket layout) - Max. Operating Speed: Up to 500 m/min - Packaging Capacity: 32 Reams / minute - Suitable Paper GSM Range: 75 - 90 g/m² - Paper Formats: A4 / A3 cut-size - Inline Hole Punching Unit: Included / Operational - Packaging Unit: Integrated automatic ream wrapping & film packaging system with customer-brand labeling options. CONDITION & INSPECTION: The machine is fully operational and maintained in excellent working condition. Available for on-site inspection. Technical datasheets, operational videos, and additional high-resolution images can be provided via email or WhatsApp upon request.

Condition: used, planer with 300 mm width and thickness Tsdpfez Dp Hcjx Aqtoc router miter saw

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: n/a, This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • No defects; the system was refurbished in 2024 and is in like-new condition. / scope of delivery: machine without extraction system, including technical documentation (2 copies in binders) Technical Machine Benefits • Sawing of solid material made of aluminum and aluminum alloys / sawing of profiles, tubes, and flat material / right-angled and mitre cuts up to ±45 degrees / in combination with a length stop, up to ±90 degrees / slot cutting • Rotating table for mitre and longitudinal cuts, with a rotation range of 180 degrees / rotary table adjustment: manually continuously adjustable ±90 degrees • Comes with 450 mm carbide-tipped saw blade, standard tooling, and coolant system / saw blade diameter (standard): 450 mm / kerf width (max. ): 4 mm / saw blade types: carbide-tipped saw blade (hm) / high-speed steel saw blade (hss) / saw blade mounting: mounting hole according to din 8576 • Cutting speed (with 400 mm blade diameter): two-step with v-belt: 1950 / 3900 m/min / feed speed: continuously adjustable: 0–3500 mm/min /rapid return speed: 4500 mm/min Tjdpfxjzzcwxs Aqtsc • Electrical connection power (two-step with v-belt): 3. 7 / 4. 7 kw (optional: 4. 7 / 6. 3 kw) / compressed air supply: 6–8 bar • Weight: 1480 kg / dimensions (l × w × h): 2700 × 1450 × 1900 mm • Electrically adjustable stroke limit for the saw feed / hydro-pneumatic saw blade feed, infinitely adjustable / rapid return stroke for short cycle times / large cabinet-style door for easy saw blade change, electrically interlocked / protective machine hood with large viewing windows, electrically secured / automatic minimum quantity lubrication (mql system)

Condition: as good as new (ex-display), Year of construction: 2026, OTT Pacific+ with special paint finish Tjdpfez D Uwmsx Aqtec Equipment: Riepe transmission Gluing, laminating (PUR/EVA), pressure zone, edge trimming for increased edge overhang Capping with 2 motors, flush trimming at the top/bottom, radius trimming R2, corner copying AKF fully equipped with optional multi-tool, NC radius draw blade R2/R1, surface draw blades 2-point, RS special unit with Riepe spray nozzles. Suitable for solid wood up to 15mm thick Feed rate from the roll: 18 m/min, including profile milling Machine weight approx. 3000 kg Return possible.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 27,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, overall weight: 21,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. • Working table: • Number of pallets: 2 (working/preparation area) • Pallet clamping surface: 1000 × 800 mm • Pallet weight: 630 kg • Axis travels: • B: 210° • C: 360° • Movements: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Position tolerance (X/Y/Z): 0.006 mm • Position tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: • Max diameter: 1000 mm • Max height: 1600 mm • Max weight: 2000 kg • Spindle: • Torque: 119 Nm (40% ED) • Tool changer: 60 positions • Coolant system: 980-litre high-pressure through-spindle with paper band filter • Availability: In excellent condition, available for demo (video available) Additional equipment • 7 extra pallets • Chip conveyor • Oil mist collector • Infrared measuring sensor • BLUM laser tool measurement • 3D Quick Set preparation • Cooling unit • Air blast through spindle • Maintenance kit (filters, wipers, installation tools) • Full manuals (English, Estonian, and digital copy) Tjdpfxox D Eh Ej Aqtec

Condition: excellent (used), functionality: fully functional, Radius and round arch cutter set Field of application: Solid wood, wood panel materials, solid surface materials and much more. Consisting of: 1. Scheer HM 16 hand router Power 1800 W / 18000 rpm 220 V Tool: Carbide insert router 16 mm Cutting length 50 mm Storage case for machine and tools Tjdjuy T Exopfx Aqtsc 2nd radius milling device ¼ circle from R 30 - 160 mm 3. radius milling device ¼ circle from R 110 - 360 mm 4. round arc milling device with radius ruler For radii from 300 - 5500 mm For the production of round, stitch and basket arches Machine and device fully functional and cleaned