Used Continuous Cooling Machine for sale (70,847)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Lrodoy Anifepfx Af Sjt

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Lrsdpfx Aeztpixjf Sjt Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Lrsdpfx Afoydvzde Sjt Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Ledpfx Ajy Uuw Tof Ssrt Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Year of construction: 2009, condition: used, functionality: fully functional, Professional electrically operated gutter forming machine designed for continuous production of half-round or angular gutters from coil material. Suitable for steel, aluminium and copper. The machine forms gutters directly from metal strip and is suitable for roofing, sheet-metal and rainwater system production. Technical specifications: Gutter type: half-round or angular Available gutter sizes: 125 mm and 150 mm (5" and 6") Material: galvanized/painted steel, aluminium, copper Steel thickness: 0.50–0.57 mm Copper: 16 oz Strip width: 298–381 mm Production speed: up to 16 m/min Electrically operated Ljdezyly Hjpfx Af Sert Continuous roll-forming process Robust industrial construction Advantages: Fast and efficient production with consistent gutter profile and dimensions. The machine is suitable both for workshop production and professional gutter manufacturing operations. Condition: Used, fully operational. Location: Latvia.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Lrodpfx Afozi Awhe Sot Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 8MORE010, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, This lot consists of five JUKI MO-6700 series industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI MO-6700 series is one of the world's most widely used modern industrial overlock platforms, renowned for high sewing speeds, clean seam formation and outstanding reliability in demanding garment manufacturing. The lot includes two machines from JUKI's current dry-head MO-6700DA / MO-6704DA series, which eliminates oil staining on the fabric - ideal for premium garments. All machines were operated in the same professional production facility and maintained under the same factory maintenance program. These machines are ideally suited for denim manufacturing, jeans assembly, knitwear, workwear, uniforms and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: JUKI MO-6700DA (current dry-head series) Internal Reference: 42B-07339 Machine 2 Model: JUKI MO-6704DA (current dry-head series) Class: 0E4-40H Internal Reference: 19B Machine 3 Model: JUKI MO-6704S Year: 2011 Internal Reference: 5B-K694 Machine 4 Model: JUKI MO-6704S Class: 0E4-40H Internal Reference: 75A-K562 Machine 5 Model: JUKI MO-6700 Series Internal Reference: 56A-724 Technical Specifications Manufacturer: JUKI Corporation Model Series: MO-6700DA / MO-6704DA / MO-6704S (2 machines) / MO-6700 Series Machine Type: Industrial Overlock (Serger) Sewing Machine 1-Needle, 3-Thread Overlock Configuration (MO-6704 class) Built-In Fabric Trimming Knife System Automatic Lubrication Dry-Head Technology on MO-6700DA and MO-6704DA – No Oil Staining Servo Drives / Electronic Controls (JUKI SV-82, JUKI SV-62, Efka) Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched modern overlock production set • High-speed overedging with clean, consistent seam formation Ljdpfxoznxhyo Af Sjrt • Reliable performance during continuous production • Reduced operator training requirements • Common spare parts across the production cell • Proven Japanese engineering and long-term durability Why Purchase This Lot • Five modern professional JUKI overlock sewing machines • Matching machines from one factory • Identical MO-6700 platform - one set of spare parts and know-how • Shared maintenance procedures • Cost-effective production line setup or expansion • Ideal for new or expanding garment factories • Excellent investment for denim and knitwear manufacturers Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Technical garments • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Lrsdpfoz Ek S Aox Af Sjt Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Lrjdpfxozv S Rwj Af Set Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Lredpezr Rugofx Af Set

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. Ljdpfxjyy Nrvs Af Sert * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touch screen for easy operation. * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. * Bevel cutting option available. * User-friendly design, easy access to the cutting area. * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Year of construction: 2014, operating hours: 4,000 h, condition: used, functionality: fully functional, machine/vehicle number: P260224159, Selling a complete, high-pressure waterjet cutting system, 6200 bar, manufactured by LDSA, a leading French manufacturer. The machine is in exceptional condition and has seen very little use (occasional use in a workshop). The configuration includes an ultra-high-pressure KMT Streamline Pro 60 pump (6200 bar), enabling higher cutting speeds and significant abrasive savings. Technical Specifications: Operating hours: 4000 hours (actual and verifiable) Usable format: 4,000 mm x 2,000 mm Pump: KMT Streamline PRO 60 (Power: 60 HP / Max. pressure: 6,200 bar) Overall condition: Very good, regularly maintained. Equipment and Options Included: Sludge management: Automatic extraction system SEBA (increased productivity and easy cleaning). Cooling: Oil cooler (chiller) included for optimal pump operation. Software: LANTEK CAD/CAM suite (license included). Accessories: High-pressure cutting head, CNC control panel. Key Advantages: Maintenance: Standard KMT and LDSA components, responsive after-sales service in France. Versatility: Ideal for steel, stainless steel, aluminum, plastic, glass or granite. Lrjdpezvx Ntefx Af Sjt Availability: The machine can be viewed under power for pressure and movement tests. Logistics: The machine is sold as is, ex-works. Dismantling, lifting, and transportation are the responsibility of the buyer (possibility of arranging contact with the manufacturer for a certified dismantling/reassembly service). Location: LUNEL, France

Condition: like new (used), Year of construction: 2023, operating hours: 68 h, Struers Discotom-100 – 2023 – only 68 operating hours – Struers warranty For sale: Struers Discotom-100, a professional, automatic laboratory cutting machine designed for the precise preparation of samples for metallographic analysis. The unit is from 2023 and is in very good condition. The machine has been used very little – the counter shows only 68 total operating hours. Key features: * Manufacturer: Struers * Model: Discotom-100 * Year of manufacture: 2023 Lsdozx Hq Depfx Af Ssrt * Operating hours: only 68 * Condition: very good, practically unused * Warranty: 12 months Struers warranty * Automatic, programmable cutting * Control of feed and sample positioning * Movable X/Y work table * Large working chamber for cutting larger and irregular parts * Adjustable blade rotation speed * Cooling system during cutting * Enclosed working chamber cover with a large window * Clear control panel * Designed for the precise cutting of metals and other materials before further metallographic preparation The Discotom-100 is a high-quality device used in quality control laboratories, materials laboratories, R&D departments, and in the metallurgical, automotive, and manufacturing industries. A major advantage of the offered unit is its very low operating hours – only 68 – and the one-year Struers warranty, which makes it an attractive alternative to purchasing a new machine. Delivery possible in January 2027.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen Lsdoz A A Dxopfx Af Sort - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 1999, Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1400 mm effective width (NUB): 700 mm belt width (GB): 585 mm hight (BH): 740-840 mm Motor Type: SEW Gearmotor Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Lodpfx Aez Ecyrof Sert Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: Lrsdpfx Aszx D Dbef Sst PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt 200mm × 2700mm belt 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: excellent (used), functionality: fully functional, We offer the Vortex D2 Mono – a fully automatic cook, quench & chill machine designed for the continuous and repeatable cooking, quenching, and chilling of food products. This solution features a MONO design, in which the cooking section is mounted on a separate frame from the quenching and chilling sections, ensuring a very high level of separation between high-temperature and low-temperature processes. The Vortex D2 Mono model was developed primarily for processing short and long pasta, but thanks to its versatility, it is also ideal for products such as rice, noodles, legumes, grains, vegetables, potatoes, and seafood. As a result, the machine can operate in both pasta and ready-meal production facilities, as well as in modern convenience food plants and among producers of salads and chilled components. The Vortex D2 Mono has a capacity ranging from approximately 250 kg/h to 4000 kg/h, allowing the system to handle both medium and very high production volumes. Lsdpfoy Df Nrex Af Ssrt The Vortex is equipped with a programmable Vortex water flow system, which ensures uniform cooking, cooling, and chilling of each product batch. This system minimizes clumping, product damage, and yield losses, and its highly efficient cooling typically achieves a product temperature of approximately 3°C. The Vortex D2 Mono can operate with conveyor feeding or with automatic batch loading of product into containers, which facilitates precise control of throughput and process organization. Additionally, vibrating dewatering conveyors enable operation in both batch and continuous modes, allowing the line to be easily adapted to subsequent production stages such as mixing, dosing, packaging, or final cooling. Also noteworthy are design solutions that enhance process quality and hygiene, such as hydraulic basket lifting, shell-and-tube heat exchangers, double degreasing overflows, and specially shaped water tanks. Hygienic, stainless steel construction and washdown-ready protection, which is of great importance in facilities operating under high sanitary standards. Key advantages of the Vortex D2 Mono separate frames for the cooking and cooling sections, high-quality separation of high- and low-temperature processes, ideal for short and long pasta, as well as rice, vegetables, potatoes, grains, pulses, and seafood, capacity up to 4000 kg/h depending on configuration, programmable Vortex water flow system, highly effective product cooling to approximately 3°C, capability for batch and continuous operation, hydraulic basket lifting and efficient drainage, hygienic, industrial design for continuous operation. Vortex D2 Mono is an advanced production line for manufacturers seeking consistent cooking, rapid cooling, high throughput, and excellent final product quality in a modern pasta and convenience food production process

Year of construction: 2023, condition: used, Empty weight: 2.850 kg Dimensions (LxBxH): 203 x 247 x 209 cm Working height: 90 cm Serial number: FTR-15-1507 Power: 400 V/50 Hz Current: 32 A Power: 16 kW Maximum workpiece width: 1,500 mm Maximum height: 170 mm Minimum height: 0.6 mm Conveyor belt speed: 0.3 to 10 m/min Controls: touchscreen Machine dimensions: 2,037 x 2,478 x 2,090 mm Conveyor working height: 900 mm Weight: 2,850 kg Hour meter: 2,989 New price in 2023 indicational EUR 195.000 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Lodjzyq Ivepfx Af Sjrt Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Ljdpfxoyzf Naj Af Sort Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Ljdpexnizdsfx Af Ssrt Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° Lredpfxozzpp Ij Af Sot - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro-spray cooling system - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Condition: good (used), Year of construction: 1999, MAKA HC 57 robot, for 5-axis machining Year of manufacture: 1999 Machine in gantry design with rack and pinion drive. Technical data: Ledpfx Afjzwk Tae Sjrt CNC control BWO 900C, for 5-axis machining. Integrated PC with 1 MB memory and 3.5" floppy disk drive. Mobile control panel. Machine table approx. 6,000 x approx. 1,270 mm. Working areas / machinable cube size with tool D 160 / length 160 mm: Y-axis: approx. 6,000 mm in 3-axis operation, approx. 5,700 mm in 5-axis operation X-axis: approx. 1,050 mm in 5-axis operation Z-axis: approx. 190 mm / travel approx. 420 mm A-axis: 540° B-axis: 360° (swivel axis +/- 180°) Rapid traverse speed X/Y-axis: 45 m/min. Z-axis: 10 m/min. 1 universal head for 5-axis milling, with 50° angled head, power max. 12.5 kW, speed continuously variable, adjustable up to 17,000 rpm. Milling spindle liquid-cooled. Chip extraction system with slat curtain and suction nozzle for room air extraction for 5-axis operation and swiveling extraction for 3-axis operation. Tool interface ISO 40 for automatic tool changer system. 1 chain tool magazine with 24 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: 10 support tubes on linear guides with pneumatic release device for quick positioning. 2 control circuits for stops "Raise / Lower" 2 control circuits for e.g. sliding strip "Raise / Lower" 2 control circuits for pneumatics "Clamp / Release" 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. 1 chip conveyor integrated in the table, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum build-up. Other: 10 vacuum supports with various suction cups. 4 clamping devices for posts / curved parts, with pneumatic clamping. 4 pneumatic stops Automatic central lubrication. Control cabinet with air conditioning unit. Work safety: Moving protective cabin with safety bumpers on the operator side. Any necessary safety measures for the rear of the machine must be provided by the customer. The machine can be inspected in working order in the southern Germany region, near the A81 highway / Black Forest.

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: OKUMA MB-500H CNC Horizontal Machining Center Lrjdezxq Itjpfx Af Sst Year of manufacture: 2003 Reliable and robust Japanese horizontal machining center equipped with an automatic 2-pallet changer, through-spindle coolant, and chip conveyor. The machine is in working condition and can be inspected under power at our facility in Croatia. TECHNICAL DATA Manufacturer: OKUMA Model: MB-500H Year: 2003 Machine type: CNC Horizontal Machining Center CNC control: OKUMA OSP WORKING AREA X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Distance from pallet surface to spindle center: 70 – 870 mm Distance from pallet center to spindle nose: 150 – 950 mm PALLET / TABLE Number of pallets: 2 Pallet size: 500 × 500 mm Maximum pallet load: 500 kg Pallet changer: Automatic rotary pallet changer (APC) Table indexing: 1° Pallet surface: 24 × M16 tapped holes The automatic 2-pallet system allows the next workpiece to be set up while the machine is running, significantly reducing non-productive setup time. SPINDLE Spindle speed: 50 – 15,000 rpm Spindle taper: SK40 / MAS 403 SK40 Spindle motor power: 26 kW / 18.5 kW continuous Spindle bearing diameter: Ø70 mm Through-spindle coolant (TSC) AUTOMATIC TOOL CHANGER Magazine capacity: 40 tools Tool holder: MAS SK40 Tool selection: Memory random Maximum tool diameter: Ø75 mm Maximum tool diameter without adjacent tools: Ø145 mm Maximum tool length: 350 mm Maximum tool weight: 8 kg FEED RATES Rapid traverse: up to 90 m/min Cutting feed rate: 1 – 60,000 mm/min EQUIPMENT Automatic 2-pallet changer (APC) 2 × 500 × 500 mm pallets Through-spindle coolant (TSC) Chip conveyor Automatic tool changer 40-tool magazine BT40 spindle Full machine enclosure Coolant system CONDITION The machine has been used in our own production and has been regularly maintained. Machine is fully operational and can be inspected under power. Location: Croatia Inspection and test run are possible by appointment. Additional photos, videos, and information are available on request. Loading/transport can be discussed separately. Price: on request / negotiable

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Weight: approx. 168 kg Equipment: Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Lredpozui T Hofx Af Sst Dimensions of the unit: approx. 600 × 600 × 1450 mm Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Lrsdsxp Urwepfx Af Set Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.