Used Combination Steamer Rational Scc 61, Year 2017 for sale (35,838)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. Djdpfx Aiertrzdjljcn The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Electric forklift JUNGHEINRICH, type EFG 216 Serial no. FN413671, year of manufacture 2011 Dcedpfx Ajinwzhsilon Load capacity 1600 kg Lifting height 4800 mm Fork length 1220 mm Fork carriage width 980 mm Overall height 2120 mm Operating voltage 48 volts - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - 2 travel speeds - Battery from 2015, type 06 EPZS C750 SC (48 volts, 750 Ah) - Automatic charger, 48 volts - 3-wheel solid rubber tires, front 18 x 7-8, rear 140/55-9 - According to the hour meter, 14725 operating hours - Power steering - Work lights, front - New TÜV/UVV inspection (additional cost: EUR 150.00 net) Length without forks 2000 mm Overall width 1080 mm Weight without battery 2390 kg Weight with battery 3480 kg

Condition: used, Year of construction: 1985, Dimensions of the thickness planer table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Dcodpsz Agd Ssfx Ailjn Maximum material removal: 8 mm Working height min./max.: 3 / 235 mm Feed rates: 7.5 / 15 m/min Cutterhead diameter: 120 / 4 mm/knife + 2 scoring knives Rotational speed: 5,000 min-1 Motor power: 5.5 kW Manual thickness planer table adjustment via handwheel Setting gauge

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Effective working width: 520 mm Diameter of the planing shaft: 120 mm Dcodpfx Aioz Dw Alolsn Number of knives: 4 Approximate weight: 1012 kg.

Condition: excellent (used), functionality: fully functional, SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW Dedpez D Ad Isfx Ailecn SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE 460 kg Year: 2009

Condition: defective spare-parts repository (used), Year of construction: 2017, operating hours: 8,553 h, functionality: not functional, mileage: 55,482 km, power: 75 kW (101.97 HP), first registration: 04/2017, overall weight: 5,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, Equipment: ABS, air conditioning, self-propelled work machine, street sweeper: + Hako + Citymaster 2000 + Registration date: 04/05/2017 + Hydrostatic transmission, max. speed 50 km/h + Chassis with municipal hydraulics at the front and rear + Front three-point linkage + Four-wheel steering + Tipping cylinder + Central lubrication system + 2-seater + Air conditioning + Heated mirrors + Camera Dcjdpfx Ajz Eia Soiljn + Radio/CD + 55,482 kilometers; 8,247 sweeping kilometers + 7,107 engine hours; 4,810 sweeping hours + 4558mm x 1595mm x 2000mm (l x w x h) + Permissible gross vehicle weight: 5,000 kg ENGINE DAMAGE: + Cylinders 2 and 4 have no compression + 4-cylinder VW diesel engine + 1968ccm + 75 kW + Engine number: CJDC006384 + Number on the control unit: CJDA Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Dcjdpfx Aez Eft Ioiljn Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: new, both working tables open at the same time! Djdpfjdvn Hwsx Ailocn working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min Dcedpfx Ajcq E Uusilon main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: good (used), Year of construction: 1983, functionality: fully functional, Used, compact LUREM C 260 EN2 planing and thicknessing machine, manufactured in 1983. This machine is suitable for planing and thicknessing solid wood. It features a planing width of approximately 260 mm, adjustable planing tables, and a pivoting fence. The thickness setting is adjusted mechanically via a handwheel. Robust and compact machine, well-suited for carpentry shops, workshops, and demanding users. Technical data / Equipment Manufacturer: LUREM Type: C 260 EN2 Year of manufacture: 1983 Machine No.: C.J. 0.17 Working width / Planing width: 259 mm Motor power: 2.2 kW Max. speed: 6,400 rpm Dedozzah Ijpfx Ailocn Thicknessing machine feed height: approx. 120 mm Power connection: 400 V / Three-phase Jointer cutterhead Planing and thicknessing function Adjustable planing tables Fence included Height adjustment of the thicknessing table via handwheel Dust extraction port available The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an additional charge! Technical data and equipment may vary. Errors, prior sale, and changes are subject to modification. All information without guarantee.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00676, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Dodpfjz Af Rdex Ailscn Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1260   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: good (used), Mitre and cross-cut saw for aluminium. Swivels left and right up to 45° and tilts up to 45°. Saw blade diameter up to 250 mm. Dodpfx Aey N S Hzsilocn

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Djdpfx Ajzmrmysilocn Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Condition: used, Combination Folding machine MBO K800.2 SKTL/4 AUT Navigator Falzmaschine / Combination Folding machine MBO K800.2-S-KTL-4 Navigator Baujahr / Year 2007 - Serial-No. 0124999 Rundstapelanleger / Round Pile Feeder Falztyp  4 Taschen - 2 Schwerter - 1 Seitentasche Folding Type 4 Buckles - 2 knives - 1 Side Buckle Schuppenauslahge mit Presswalzen / Stream delivery with integrated pressing MBO ASP 66 - 2 ME  Inklusive Kompressor / Include Compressor Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Dcsdozzywiopfx Ailon

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle Dsdez Ebxyepfx Ailocn ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Dcedpfx Astwqzrsiljn

Condition: good (used), Year of construction: 2019, operating hours: 385 h, load capacity: 1,000 kg, lifting height: 1,517 mm, fuel type: electric, mast type: duplex, construction height: 1,940 mm, empty load weight: 500 kg, mileage: 385 km, This electric stacker from STILL (2019) is in good condition; The stacker has a lifting capacity of 1,000 kg; Lifts up to a height of 1,517 mm; The clearance height is 1,940 mm; ONLY 385 operating hours on the clock; Equipped with FREELIFT; The battery features an INTERNAL charger and an automatic filling system; Order the stacker via our webshop or schedule a test drive! Video to follow. Dodpjyma Uyjfx Ailecn

Condition: good (used), Year of construction: 2018, operating hours: 1,619 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 472 kg, mileage: 1,619 km, Well-functioning electric pallet truck Linde T16 from 2018; Capacity of 1,600 kg; 1,619 hours on the counter; Equipped with battery, external charger, and automatic filling system Dedpfxsw Tk R Ss Ailjcn

Condition: used, Year of construction: 2017, Overview  This brewhouse was manufactured in 2017 by a Finnish company. It is a manually operated 3-vessel system with 1,000-liter capacity, consisting of hot water tank, boiling vessel, and mashing vessel. The equipment is stored in a separate warehouse and available immediately. A viewing can be arranged upon request. Technical data  - Capacity: 1,000 liters per batch - Number of vessels: 3 - Automation level: Manual operation Scope of Delivery  - Hot water tank - Boiling vessel - Mashing vessel Dcedpfxswfqyxj Ailsn - Accessories for connection

Year of construction: 2014, condition: used, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm Dcodpeyatdzjfx Ailjn - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm - Shaft with 4 knives - 2 table rollers - Motor with brake Dcsdpfoya Drvsx Ailon Machine in very good, excellent condition.

Condition: used, Technical data: - Blade: Z2 strip planer blade Djdpfx Aezryc Hoilocn - Cutting diameter (ø): 125 mm - Bore: 40 mm - Length: 240 mm - Material: Aluminium

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Dcodpsyybkdefx Ailen - Capacity: approx. 12,000 bottles/hour - Formats: up to 3 L PET bottles - Application: PET bottle production - Configuration: Rotary stretch blow moulding machine, 6 cavities - Neck finish: PCO 1881 Scope of Delivery - Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds - Preform feeding system  - Chiller unit  - Air conveyor system  - Control system | Integrated HMI

Condition: used, Year of construction: 2001, Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data - Capacity: approx. 40 trays/min - Formats: Dedpfxoyy Sqze Ailjcn - 24 × 0.5 L cans - 15 × 0.33 L sleek cans - 4 × 6 × 0.33 L bottles - 6 × 4 × 0.33 L bottles - 8 × 3 × 0.33 L bottles - 3 × 6 × 0.5 L bottles - Application: Packaging of cans and bottles - Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery - Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) - Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink tunnel - Conveyor system | Gebo | Integrated product transport - Control panel | Siemens | SIMATIC OP17 | Operator interface

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00645, load capacity: 185 kg, arm reach: 3,060 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/185L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/185L Model Number: A05B-1329-B211 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 185 Reach (mm): 3060 Repeatability (mm): ± 0.2 Dcsdpfx Aozqcm Seilen Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1290   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10