Used Cold Proofer for sale (1,423)

Condition: good (used), Year of construction: 2018, Used cold circular saw from IMET Model: Sirio 370 Pgsdsytb I Iepfx Ahyek Saw blade diameter: 370 mm Semi-automatic Double mitre Automatic raise/lower Year of manufacture: 2018

Condition: used, Year of construction: 2010, functionality: limited functionality, total width: 5,840 mm, total length: 15,700 mm, Offered here is a combination cold and deep-freeze room manufactured by Dresdner Kühlanlagenbau. Included in the scope of supply are the refrigeration units as well as the electrical equipment (lighting, control cabinet, etc.). Please note that the pallet racks shown in the pictures are not included in the sale. Unfortunately, the refrigeration unit for the deep-freeze compartment is defective. Please be aware that we are unable to carry out or arrange any repairs ourselves. Size of cold room (anteroom): 5.60m x 2.75m = 15.4 m² Size of deep-freeze room: 5.60m x 12.59m = 70.5 m² Clear internal height: 3.50m Pjdpfstn U Rpex Ahyjgk Insulation thickness: 120 mm Further dimensions and technical details can be found in the attached PDF document. The unit is not dismantled and can be inspected on site at the production location in Thuringia by appointment. Dismantling and transport are not included in the price and must be organized by the buyer. However, assistance with dismantling and loading by forklift can be provided.

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Podjrz R Aropfx Ahysgk Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, ambient temperature (min.): 4 °C, type of cooling: air, number of chambers: 1, A cold storage room is being offered. The cold storage room was in use for only 1 year. It has 2 units and a type of pass-through to avoid opening the door. Inspection and testing are possible at any time. Dismantling must be carried out by the customer. No guarantee is given for technical data. Pjdpfx Aheywfdpjyogk

Condition: new, Year of construction: 2025, neu 2025 Pgsdpfx Ahswmf Uasyjk 060103 prompt, Zwischenverkauf v Türkei 7500 € 121.59 € 1 6300 € 350 mm 350x32x63 mm 45 / 80 U/Min 45 ° 45 ° rund 115 mm / quadratisch rund 110 mm / quadratisch rund 110 mm / quadratisch 1,8 / 2,2 kW 1100 mm 1000 mm 1400 mm 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable, 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: Pgedjyu Hy Sepfx Ahyok round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,150 net, loaded free of charge!

Condition: like new (used), Kaltenbach saw for sale! Ideal for metalworking outdoors. This robust machine is ready for immediate use and perfect for precise cuts. It shows slight signs of use but works flawlessly. Take advantage of this opportunity to upgrade your workshop! Viewing possible by appointment. A must-have for any craftsman! Psdpsyuxuhofx Ahyjgk

Condition: good (used), 346 USED Pre-proofer Kovy, for elongated and cut rolls. Pgedpfxsyuvwme Ahyjk The device is in working order. The device may be for PARTS. We have two of these devices. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2005, saw blade diameter 450 mm cutting diameter 150 mm stroke 1300 mm cutting range 140x140 mm Roller conveyor 6000x350 Roller conveyor 4500x700 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Pgsdpfsyutvgjx Ahyok About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2007, condition: good (used), functionality: fully functional, We are offering pressing line for rapeseed/sunflower with prepress (FS1000 55kw), final press (FS1000 45kw) and full automatic filtration for oil, 10m2. It is made for double cold pressing, which is low energy consuming and completely natural, providing the oil without necessity for degumming, because phosphorus content is low. After that full automatic filtration will remove cake residues from oil, which can be safely stored without any damage. Pgedpfxoxuafyo Ahyjk Capacity of the line 1.400kg/h, 32t/24h

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw Podpfex Sdpyjx Ahysgk -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Condition: used, Year of construction: 1997, saw blade diameter 400 mm capacity 90 degrees: round 135 mm capacity 90 degrees: square 130 mm 200 x 80 mm saw blade turning speeds 12 / 25 m/min weight of the machine ca. 0,75 t dimensions of the machine ca. 1,2 x 0,9 x 1,8 m Cold circular saw - Semi-automatic - Hydraulic clamping - Coolant system Pedpfx Asyt R I Dshyjgk - Protective cover - good condition

Condition: new, Year of construction: 2025, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps Pgjdpfx Asgg N Axohyjk - Mist lubrication system - Roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400 V

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System Pgedpoh N Di Dofx Ahysk - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Pgodpfsvcqx Dex Ahyek Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Pedpfjvcqv Nex Ahyjgk Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: ready for operation (used), We can offer Sakamura cold nut formers models: NP 430, NP 440, NP 450, NP 460, NP 480 Psdpfx Asv H Ap Ashysgk Diameter of bars from 4mm -33 mm All machines underpowered

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover Podpfx Ahsh A S Htjysgk - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720 °C - Medium alloyed cold work tool steel - Oil-hardening 4 pieces available, price per piece. Pgedpfxogmi U Se Ahyok

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° Pgjdpequzd Rsfx Ahyok - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: excellent (used), Year of construction: 2004, Type Loedige TSHK-160/KGU-400 Serial no. 3901 Year of manufacturing 2004 Hot mixer 210 liters Psdpovzzw Uefx Ahyegk Cooling mixer 391 liters

Condition: used, Year of construction: 2004, saw blade diameter 450 mm cutting diameter 150 mm Pgjdpsyk E U Hsfx Ahyjk turning speeds 6 / 12 / 24 / 48 U/min capacity 90 degrees: flat 240 x 70 mm capacity 60 degrees: flat 170 x 70 mm capacity 30 degrees: flat 120 x 70 mm capacity 90 degrees: round 150 mm capacity 60 degrees: round 145 mm capacity 30 degrees: round 120 mm capacity 90 degrees: square 140 x 140 mm capacity 60 degrees: square 125 x 125 mm 100 x 100 mm total power requirement 3,6 kW weight of the machine ca. 1150 kg dimensions 1450 x 1610 x 1900 mm Semi-automatic mitre saw Equipment: - miter 30° / 60° / 90° - digital display - roller conveyor - Hydraulic clamping - Hydraulic saw blade feed

Condition: excellent (used), 338 USED WP Garstop proofer. EXTERNAL DIMENSIONS (in cm): - Width 178, - Depth 240, - Height 245. INTERNAL DIMENSIONS (in cm): - Width 146, - Depth 206, - Height 197. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile. Pgedjyrn R Hopfx Ahysk

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 350 mm, Semi-automatic circular saw machine for aluminium, wood, etc. Manufacturer: MEP Model: COBRA 350 SX Year of manufacture: 1998 Saw blade diameter: 350 mm Cutting diameter: 120 mm Stroke: -- mm Podoyrhz Eepfx Ahyegk Working height: 930 mm Cutting range at 45°: round 120 mm Cutting range at 45°: square 180 x 70 mm Cutting range at 90°: flat 105 mm Cutting range at 90°: square 100 mm Saw blade: 350 mm diameter, 90 teeth, bore 32 mm, thickness 3.4 mm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.6 t Space requirement approx.: 2.3 x 1.7 x 1.8 m

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm capacity 90 degrees: square 150 mm turning speeds 29 / 58 m/min. total power requirement 4,2 kW weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping Podpfx Aeyrhurshyjgk - 4 spare saw blades