Used Cnc Work Center for sale (54,812)

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 00820028221, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 20,000 rpm, travel distance X-axis: 490 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, mount diameter: 63 mm, workpiece weight (max.): 100 kg, total height: 2,400 mm, total length: 7,000 mm, total width: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DMG MORI, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 10,397 h, distance between spindles: 1,020 mm, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, DMG MORI CTX BETA 800 TC CNC turning and milling center - Maximum workpiece diameter: 500 mm - Maximum workpiece offset from the spindle flange: 120 mm - Travel distance X1: -10/+490 mm - Travel distance Y1: +-100 mm - Travel distance Z1: 845 mm - Travel distance Z2: 600 mm - Travel distance Z3: 800 mm - Tool holder: HSK 63 The machine is equipped with a tailstock, a main spindle, and a milling head. Includes the tool holders in the tool changer, as well as a chip conveyor, coolant system, and filter extraction. Note: The item must be picked up on a date to be determined between October 7th and October 14th, 2026. FCA D-35576 Wetzlar – loaded onto a truck. Hjdpozlghcjfx Amyor

Condition: used, Year of construction: 1998, Horizontal CNC Center REALMECA C300H Travel X: 320 mm Travel Y: 350 mm Travel Z: 250 mm Numerical Command: NUM 1060 Série II Cone: BT 40 Spindle rotation: from 100 à 6000 RPM Year of construction: 10/98 Maxi distance spindle nose/table: maxi 450 mm / mini 50 mm Tools store: 20 tools Threadings: Fast: maxi 10 m/min Hsdpjzm Sqlsfx Amyer Work: 0 to 10 m/min Axe B: 10 RPM Equipped with: 2 palets 300 x 300 mm Voltage: 380 V Dimensions (L x W x H): 2450 x 1700 x 2400 mm Weight: 3,8 T

Condition: used, Year of construction: 2018, operating hours: 28,500 h, functionality: fully functional, machine/vehicle number: AT0980, turning length: 650 mm, turning diameter over cross slide: 400 mm, turning diameter: 400 mm, spindle motor power: 21 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 275 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 700 mm, mount diameter: 250 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, feed length X-axis: 275 mm, feed length Y-axis: 90 mm, feed length Z-axis: 700 mm, torque: 258 Nm, bar passage: 65 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 24 m/min, total height: 2,500 mm, total length: 2,800 mm, chuck outer diameter: 250 mm, total width: 1,600 mm, bar diameter (max.): 65 mm, spindle nose: A8/DIN, swing diameter over bed slide: 600 mm, overall weight: 6,000 kg, swing diameter over top slide: 400 mm, spindle diameter: 65 mm, turning diameter over bed slide: 400 mm, Equipment: documentation/manual, CNC Turning Center SPINNER TC600 65SMCY with Bar Feeder SPINNER TC600 65SMCY CNC turning center, manufactured in 2018, equipped with a Siemens SINUMERIK 840D sl control. The machine is suitable for complex turning operations and serial production. It is equipped with a Y-axis, sub-spindle, driven tools, chip conveyor, and parts catcher. Machine details • Manufacturer: SPINNER • Model: TC600 65SMCY • Year of manufacture: 2018 • Serial number: AT0980 • Control: Siemens SINUMERIK 840D sl • Power supply: 400 V, 50/60 Hz • Maximum swing diameter: approx. 600 mm • Maximum turning diameter: approx. 400 mm • Maximum turning length: approx. 650 mm • Axis travel: X 275 mm / Y +50 to −40 mm / Z 700 mm • Rapid traverse X/Y/Z: 15 / 15 / 24 m/min Main spindle • Maximum spindle speed: 4.000 rpm • Spindle nose: A8/DIN • Chuck size: 250 mm • Spindle power: 21/27 kW • Torque: 201/258 Nm Sub-spindle • Maximum spindle speed: 6.000 rpm • Chuck size: 165 mm • Power: 10/12 kW • Torque: 64/76 Nm Turret and driven tools • Up to 16 tool positions • Driven tool speed: up to 6,000 rpm • Driven tool power: 2.3/4.5 kW • Driven tool torque: 5/10 Nm Included equipment • Chip conveyor • Parts catcher • Tool holders shown in the photos Included driven tool holders: 8 • 3 radial driven tool holders • 5 axial driven tool holders • 2 of the axial holders are double-sided Bar feeder The machine is sold together with a Breuning IRCO ILS-SSL 70 bar feeder. • Manufacturer: Breuning IRCO • Model: ILS-SSL 70 • Type: SSL-7012-III • Year of manufacture: 2018 • Voltage: 200–500 V • Power: 1 kVA • Weight: 500 kg Operating hours • Main spindle operating hours: approx. 9.300 h • Sub-spindle operating hours: approx. 3.300 h • Total machine power-on hours: approx. 28.500 h It is connected and available for inspection and testing by prior arrangement. The machine is available immediately. Hodpfszm Rrzjx Amyer

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Machine No.: 10990003463Control SystemHeidenhain iTNC 530 (3D path control)Travel PathsX: 1,850 mmY: 2,000 mmZ: 1,100 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 25–12,000 rpmPower: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-slot tool magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lATC (Application Tuning Cycle)Laminated safety glass windowOperating mode 4 (process observation) Travel Y-axis: 1800 - mm Weight approx.: 45,000 kg Travel Z-axis: 1170 - mm Travel X-axis: 2000 - mm Hedpfxjzm Dw Ro Amyor Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Year of construction: 2,006 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Hodpfx Amjzlbzqsyer Technical details are shown on pictures.

Condition: used, Year of construction: 2023, New demonstration machine! List price: €86,567 net. Basic machine, complete in standard configuration for drilling and grooving: Detailed technical data, see data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y. 4th-axis drilling in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000-20000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional milling unit Profit. Connection power 12 kVA. Rated current 17.5 A. Fuse 32 A. Voltage 400 V, 50 Hz, 3-phase (without transformer). Power supply TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: Coupling plug (quick coupling) ¼, DN7.2, brass, factory-side. For the machine: Coupling socket (quick coupling) ¼, DN7.2, brass, customer-side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle, dia. 80 mm. Extraction speed: 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight: approx. 1650 kg (with options!). Machine installation location: As a rule, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via a louver curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for Protec, shank ø 10 mm with clamping surface (JSO) 1 HW-countersink drill bit 5x70mm (NL 35mm), LI # 30566-5-05035-L3. 1 HW-dowel drill bit 5x70mm (NL 35mm), RE #30540-5-05035-R4. 1 HW-dowel drill bit 5x70mm (NL 35mm), LI #30540-5-05035-L3. 1 HW-dowel drill bit 8x70mm (NL 35mm), RE #30540-5-08035-R. 1 HW-dowel drill bit 8x70mm (NL 35mm), LI #30540-5-08035-L2. 1 HW-dowel drill bit 10x70mm (NL 35mm), LI #30540-5-10035-L1. 1 HW-pot drill bit 15x70mm (NL 35mm), LI #30300-5-15070-L1. 1 HW-pot drill bit 20x70mm (NL 35mm), RE #30300-5-20070-R1. 1 HW-pot drill bit 35x70mm (NL 35mm), RE #30300-5-35070-R. 1 HW-grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LI, Leitz. Only for chipboard and MDF, solid wood on request and by arrangement. Tool holder HSK63 F 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Indexable carbide shank milling cutter, Z1+1, 1.0 pcs. with WP drilling insert ø20, S25, LI 120, L2/L3 58 mm. Grooving cutter HW indexable inserts Z1, 1.0 pcs. with WP drilling insert, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RE (the a Hodpfxsw Tfzfe Amyor

Condition: used, Year of construction: 2011, pricing can only be given out if you send me an email writing your email address. As machine seeker encrypts your email address. MACHINE: GILDEMEISTER CTX Alpha 300 V3S YEAR: 2011 SERIAL NUMBER: 00400003392 CONTROL: Siemens Sinumerik 840D sl ShopTurn ERGOline MACHINE TYPE: CNC Turning Center with C-Axis and Live Tooling CAPACITY: Maximum Turning Diameter: 200 mm Maximum Swing Diameter: 500 mm Maximum Turning Length: 300 mm Bar Capacity: 51 mm MAIN SPINDLE: Spindle Nose: A2-5 Chuck Size: 165 mm Hydraulic 3-Jaw Chuck Spindle Bore: 65 mm Maximum Spindle Speed: 6,000 rpm Spindle Motor Power: 16.5 kW (100% duty) 25 kW (40% duty) Maximum Spindle Torque: 192 Nm AXES: X-Axis Travel: 190 mm Z-Axis Travel: 335 mm Rapid Traverse X: 30 m/min Rapid Traverse Z: 30 m/min TURRET: Turret Type: VDI 30 Number of Stations: 12 Live Tool Stations: 12 Maximum Live Tool Speed: 5,000 rpm Live Tool Power: 3.7 kW C-Axis Resolution: 0.001° TAILSTOCK: Hydraulic Tailstock (optional depending on machine configuration) COOLANT SYSTEM: Flood Coolant Chip Conveyor Compatible ACCURACY: Positioning Accuracy: ±0.005 mm Repeatability: ±0.003 mm ELECTRICAL: Hodezd R S Aopfx Amyer Power Requirement: 400 V / 50 Hz / 3 Phase Connected Load: Approx. 30 kVA DIMENSIONS: Length: 4,260 mm Width: 2,510 mm Height: 1,825 mm MACHINE WEIGHT: Approx. 4,000 kg

Condition: ready for operation (used), A Deckel Maho CNC vertical machining center is available. Travel X/Y/Z: 1000mm/600mm/600mm, table dimensions X/Y: 1200mm/600mm, max. table load: 800kg, spindle speed: 8000rpm, power: 13kW/9kW, torque: 57Nm/83Nm, feed rate: 30m/min, rapid traverse: 30m/min, tool stations: 24, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3200mm/2600mm/2700mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Hodpfszmym Isx Amyer

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Hedpfxoxr N Rme Amyer Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning center TNA480, TX8D, year of manufacture 1990, serial number >550. C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, hollow cylinder chuck, 3-jaw chuck KNCS315. Hsdpfx Aezcdgfsmysr Good condition, ready for operation. Machine geometry has been checked and corrected/adjusted. Scrapers and belts have been inspected, replaced, maintenance performed after 4000 operating hours. The photos were taken in the production environment; the machine will be cleaned and inspected further. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. Hodpfx Aszfkbaomyjr The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Machine is in good working condition. Hedpfx Amozk U Unjyor

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min Hodpfjzk U Rpsx Amyor spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: excellent (used), Year of construction: 2006, operating hours: 6,500 h, functionality: fully functional, turning length: 600 mm, turning diameter: 320 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, bar diameter (max.): 60 mm, Equipment: rotational speed infinitely variable, CNC turning and milling center GILDEMEISTER CTX 410 V3 Year of manufacture: 2006 Control system: Heidenhain Operating hours: 6,500 hours Technical data: Main spindle speed: 20 - 5,000 rpm Drive power: 21 kW Torque: 420 Nm Travel distances: X-axis: 250 mm Z-axis: 600 mm Hodpjzmp Alefx Amyer Turret: 12 stations Tool holder: VDI 30 Drive power: Speed: Accessories: - Coolant system - Chip conveyor - 3-jaw chuck - Various tool holders

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Hedozk I R Aspfx Amyor Technical data shown on pictures.

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Technical details shown on picture. Hjdpfszk Iw Aox Amyer

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Hedpfx Amezk E Husysr

Condition: good (used), Year of construction: 2006, I sell the 3-axis CNC working centre Biesse Rover A 3.30 with beam table, year 2006. Hsdpjzmnzmofx Amysr Configuration: 3-axis main spindle HSD Tool magazine 14 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3130x1250mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Uniclamp System included Total power 17kW Biesse Works software controller with full instructions. Pump Becker 110 m3/h. 2,4KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: used, Year of construction: 2006, functionality: fully functional, DENVER QUOTA V – Year 2006 Hodpezkva Eefx Amyor CNC Machining Centre 3-Axis Maximum Dimensions: 1550 x 3200 mm Weight: 3900 kg New spindle In good working condition.

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Hedpfx Amjy Hwn Eeysr Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. Hjdpfx Aowtft Nomysr The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Hodozkthgjpfx Amyer Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Year of construction: 2021, condition: good (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, controller manufacturer: ELUMATEC, controller model: SBZ 122-ELUCAM, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 24 A, feed rate X-axis: 120 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.1 mm, spindle speed (max.): 20,000 rpm, tool length: 150 mm, number of slots in tool magazine: 12, ELUMATEC 122/73 CNC bar machining center Hsdpfszktdzox Amyer - Frequency: 50/60 Hz - Max. machining length without end-face machining: 4050 mm - Machining direction (front and back) - Disc cutter diameter: 120 mm - Clamping cylinder displacement, automatic - Tool holder: HSK-F 63 Note: The item must be collected between September 22nd and September 24th, 2026, on a date to be agreed upon. FCA D-76227 Karlsruhe - loaded onto a truck.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Hjdpfx Amjzkpxnjyor Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC-Steuerung Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Hjdpfxezkpuvs Amyjr Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l