Used Celerra Antivirus Agent Cava Software for sale (3,429)

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Hodsw Imp Hspfx Almjfl Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: used, Year of construction: 2014, functionality: fully functional, Milling swivel head: - with torque motor and hydraulic clamping - Swivel range +30/-120°, stepless - 14,000 RPM - 160 Nm torque - Drive power 29 kW Hedpfxszzp E Ns Almefl - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with air blow-out function Integrated rotary table: - with torque motor and hydraulic clamping - Ø 610 mm - Extended clamping area 1,100 x 610 mm General: - 40-position tool changer with dual-arm gripper - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light Control system: Heidenhain iTnc 530 SmarT.NC HSCI - 15.1'' TFT screen - Ethernet interface - 2x USB port - SmarT.NC-guided programming - Plain text programming - Short sentence processing time - Create a new program while another is being processed - Proven Heidenhain machining cycles - CE certification Options: - Internal cooling system (IKZ), 40 bar, including band filter system - Heidenhain TS640 for DIN SK40 workpiece probing system with infrared transmission - Heidenhain software option 40: DCM Dynamic Collision Monitoring for iTNC 530 - Heidenhain KinematicsOpt incl. Heidenhain calibration sphere KKH 250

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Hjdpfx Alsunaqvemsfl Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 13/20-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 13/20-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1300 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 9.3 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 195 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE Hfedezc Emmepfx Almjl KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Hedpszzpwrefx Almsfl Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Hodpfxszz A A Io Almsfl Laser protection enclosure Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.

Condition: as good as new (ex-display), Year of construction: 2008, operating hours: 133 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 360-3/1130 FlexPicker delta robot complete with IRC5 controller and machine vision system – Only 133 Operating Hours. The robot is capable of identifying randomly oriented products and picking them directly from a moving conveyor using ABB Conveyor Tracking and integrated vision technology. Ideal for: Hfodpozcp Egofx Almol Pick & Place applications Food processing and packaging Confectionery industry Pharmaceutical products Plastic components handling Product sorting and orientation High-speed automation projects Condition Ex-display machine Only 133 operating hours New OEM battery installed Robot joints lubricated Robot calibrated Fully tested and ready for installation Scope of Supply ABB IRB 360-3/1130 FlexPicker robot ABB IRC5 controller Machine vision camera FlexPendant Complete cable set Robot stand / aluminium frame structure Installed Software Options Conveyor Tracking (606-1) DeviceNet Master/Slave Advanced RAPID PC Interface Socket Messaging Fieldbus Command Interface World Zones Path Recovery Independent Axis Logical Cross Connections Analog Signal Interrupt Electronically Linked Motors Fixed Position Events Multiple Axis Positioner Key Advantages Complete vision-guided FlexPicker package Conveyor Tracking included IRC5 controller Very low operating hours (133 h) Serviced and calibrated Ready for integration into production lines Additional photos, videos and controller backup available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, positioning speed: 60 m/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 50 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. Hfedpozzkrwsfx Almel The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus CNC plasma cutting system with nesting software Year of manufacture: 2016 Power source: Kjellberg HiFocus 161i Hfedpfx Alozpf U Nsmel Provision for retrofitting an oxy-fuel torch including Kemper filter system Maximum working area: 3000x1500mm Machine location: Hall in Tirol Immediately available

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. Hedpfszzk Ekox Almjfl - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Condition: used, mileage: 104,041 km, power: 375 kW (509.86 HP), first registration: 03/2023, fuel type: diesel, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, Engine D2676LF78 - 510 hp / 375 kW EURO6 SCR - 2600 Nm C-R OBD-D, transmission ZF 12 TX 2826 OD MAN TipMatic, transmission software for off-road use (TipMatic OFFROAD), multifunction steering wheel adjustable in height and tilt, ESS, EBA2, ASR, mirrors heated and electrically adjustable, driver comfort seat with air suspension, MAN radio with 12V and 7" color display + navigation + NaviSD, trailer coupling RINGFEDER 4040 G 150B, driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating, auxiliary drive on the flywheel side with pump connection, wedge tenon profile DIN ISO 14 - 8x32x36 f=1.233, I.S.A.R., tank dimensions 7000 mm - 5000 mm, MAN BrakeMatic (EBS), emergency brake assist (ESS), cruise control, anti-lock braking system ABS, anti-slip control ASR, electronic stability program, tire pressure monitoring system. Hfodpfx Ajzhqp Aslmsl

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 390.829, functionality: fully functional, operating hours: 6,700 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 75 kg, number of axes: 1, number of slots in tool magazine: 1, actuation type: electric, total height: 1,409 mm, total length: 1,484 mm, total width: 2,325 mm, table width: 1,000 mm, Equipment: CE marking, For sale due to acquisition of a new machine: our Gannomat Protec 571 CNC machining center, purchased new in 2018. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for producing furniture components and panels. Its advanced automation and robust construction ensure repeatable results and significant time savings in production. This machining center is especially suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Technical specifications: - Workpiece width X: 60 - 1000 mm Hfsdjzhrdzepfx Almsl - Workpiece length Y: 250 - 5600 mm - Workpiece height Z: 6 - 60 mm - Workpiece weight: 75 kg - Rapid machining: 21 drilling spindles - Stable grooving unit: 8.3 mm saw blade width - Powerful milling unit: 5.5 kW (S1), with reversible rotation - Compact footprint: Less than 3.3 m² Including with the machine: - Drilling tools and 1 pc. HSK63 chuck and tool for modern joinery applications. Optional software: - Gannomat Editor office software: €1,000 (installation and activation by Gannomat for an additional fee) - DXF postprocessor for efficient operation: €1,000 (installation and activation by Gannomat for an additional fee) ATTENTION: Low operating hours. The price of the machine does not include VAT.

Condition: used, Year of construction: 2012, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Hodpfx Alownhccomefl Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Hfsdpfx Aljzz Shyomel Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Hodpezz Sd Ujfx Almsfl Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 1,770 mm, total width: 600 mm, total length: 617 mm, input voltage: 230 V, type of cooling: air, Equipment: documentation/manual, type plate available, Thanks to the enclosed construction cartridge system, this 3D printer is ideally suited for prototype construction, the dental field, or even for training purposes, as there is no contact with the metal powder – neither during the component preparation nor during the printing process itself. AL3D-METAL 200-100 3D metal printer for additive manufacturing LASER TYPE: Fiber laser Wavelength: 1070 nm Average power: 200 W Operating mode: CW Focus diameter: 50 μm Scanning speed: max. 5 m/s Hodpezlnh Refx Almjfl Process parameters: Option to comprehensively influence the process parameters INCLUDES 9 CONSTRUCTION CARTRIDGES: Build volume: r Ø 100 mm; z 60 mm Layer thickness: 10 - 50 μm Achievable component density: > 99 % SOFTWARE AL3D-OS Operation: via 15.6" touchscreen, keyboard, and mouse Connectivity: 1x Ethernet; 2x USB CAD import file format: STL Print preparation: Simple support generation. Slicer integrated into the software.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,918 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 4,250 kg, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details. - Phase: L1/L2/L3/N/PE- Power Consumption: 30 kVA- Maximum Current (A In max): 43.5 A- Rated Current: 50 A- Short-Circuit Current (V max): 5 kA / 440 V max.- Voltage: 400 V ±10%- Frequency: 50 Hz- Control Voltage AC: 230 V- Control Voltage DC: 24 V- Control: 3D Control Siemens 840D SL Operate- Tool Taper: BBT30- Work Table: Integrated NC rotary tilt table, 5-axis simultaneous operation- Swivel Range A-Axis: -120° / +100°- C-Axis Operation: Continuous (Endless)- Maximum Load C-Axis: 100 kg- Table Diameter C-Axis: Ø290 mm- Drives: Torque drives including direct path measurement in A- and C-axis- Software Packages: Sinumerik MDynamics 5-Axis, 3D data model for simulation- Table Options: Clamping pneumatics (1-circuit)- Coolant & Chip Management: Chip conveyor, Production package belt filter with 40 bar internal coolant supply (IKZ), Blow air through spindle center, External blow air, Oil and emulsion mist separator system- Measuring & Monitoring: RENISHAW 3D touch probe kit, Tool breakage monitoring and in-machine measurement, Preparation for 3D quickSET- General Options: Operating mode 3, CE conformity- Automation Interface: Automation interface for external automation on the right- Automation System: DMG MORI WH 3 Cell- Robotic Arm: Fanuc LR Mate 200iD/7L yellow 6-axis robot- Robot Gripper: Double gripper PGN64- Automation Components: 10 DMG drawers, NIO chute, Alignment station, Measuring drawer, Raw material inlay system, Gripper set, Accessories- Machine Operating Hours (from control screen): Machine runtime: 22,918:34 h; Program runtime: 20,920:40 h; Spindle runtime: 18,815:51 h Hedpfx Ajzx Sryelmofl

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Bosello SRE MAX 70-120 Radioscopy and Digital Tomography System Complete, turnkey system, ready for immediate operation. Technical specifications X-ray source: 225 kV Hfsdpfx Aoz Aimpelmel Detector: Integrated digital flat panel Bosello SRE MAX 70-120 Radioscopy and Digital Tomography System Complete, turnkey system, ready for immediate operation. Recently inspected and certified by Bosello (manufacturer). Technical specifications X-ray source: 225 kV Detector: Integrated digital flat panel Part manipulation: Motorized rotating table + XY stage Access: Front door Control software: Bosello IP EXTREME (integrated into the system) CT workstation: Dedicated computer with Volume Graphics VG Studio MAX Key features Complete 2D digital radioscopy and 3D computed tomography system in a single unit IP EXTREME: real-time imaging, advanced processing, measurement, and reporting VG Studio MAX license included and transferable – CT reconstruction, dimensional analysis, porosity assessment, and defect detection Rotating table + XY stage for precise and repeatable positioning Ergonomic front access for convenient loading and unloading of parts Recently inspected and certified by the manufacturer (Bosello, Zeiss group) – report available Software licenses: Both IP EXTREME and VG Studio MAX are fully transferred to the new owner. Applications: Casting inspection · Welding control · Dimensional CT · Quality in automotive and industry · Component integrity Year: 2015 Condition: Used – excellent condition. Complete and operational system.

Condition: new, mileage: 500 km, power: 338 kW (459.55 HP), axle configuration: 8x4, color: white, driver cabin: day cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at...). Iveco X-Way AD320X46BZ OFF 8x4 roll-off tipper. Hfodpfx Aezurh Hslmsl Body: HIAB ULT 26S53-W-ITF, wheelbase: 4,250 mm, Speedline aluminum rims, SLT, Rocking Mode (free-swing mode), roof hatch, mechanical version, cab rear wall with window, recommended for open bodies to observe rear traffic, air suspension for the cab, protective grille for headlights, transparent sun visor, installed on the outside of the cab roof, preparation for rotating beacon lights, flat roof painted in cab color, hot water circulation pump, suitable as a rest heating system, residual heat from the coolant is used and circulated in the system, passenger seat static, integrated 3-point safety belt in red, driver's seat luxury, air-suspended, heated, 4-way adjustable, lumbar support and headrest, with integrated 3-point safety belt in red, leather steering wheel, signal horn behind the bumper (compressed air), sun blind roller for side window, driver and passenger side, ashtray in center console, exhaust pipe raised behind the cab, parabolic suspension 2-layer, SL, parabolic spring on the front axle 1-leaf design (Super Loader), without jack, radiator cover under the bumper for rough off-road use, battery charging socket, clamps, fuel tank 210 liters, aluminum, maneuvering and towing hitch, rear axle ratio: 3.09, CAN bus interface CAN-OPEN for body control, infotainment 10 TFT display, without ECO-Roll transmission software (freewheeling function), adaptive cruise control (ACC), side marker lights, emergency braking assistant (AEBS), warning sounder for reversing, switchable, underrun protection on the side, electric parking brake, hazard warning lights, electronic stability program (ESP), front headlights LED, LED rear lights, fog lights including cornering/turning lights. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved!!! Aluminum rims, ESP, navigation system, auxiliary heater, particulate filter Cab: Local transport = Further information = Engine displacement: 13,000 cc GVWR: 32,000 kg Contact Tobias Ebert for further information.

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Hodpfxezxzgmj Almjfl Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heating element power [kW]: 12 Connected load [kW]: 17.5 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 Hedjz Aiyvepfx Almefl EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. Hfodpezi Svmsfx Almel We didn't use it much because we mostly print on our plotter. Inspection is possible.

Condition: used, Year of construction: 2012, CNC Machining Center Manufacturer: Weeke Type: PROFI BHP 210/56/22/R Year of Manufacture: 2012 Technical Data - Work table length: 5600 mm - Work table width: 2250 mm - Max. workpiece thickness: 135 mm Vector speed - X/Y: 105 m/min - Z: 20 m/min Special vacuum field arrangement - 5600x2250 - 3000x1525 - 2500x1250 - 1525x1525 2x Central vacuum frame for max. 3 pumps 6 Vacuum pumps 300/360 m3/h, 50 /60 Hz Automatic tool changer spindle - Tool holder: HSK63 - Tool retraction: automatic - Direction of rotation: right/left - Speed: 1250 - 24000 1/min, continuously programmable - Drive: frequency-controlled three-phase motor - Max. power at the tool: 7.5 - 12 kW (S1/S6 50%) - Spindle lubrication: grease, permanently lubricated - Cooling: liquid circulation cooling - Bearing: hybrid bearing (ceramic) Aggregate interface for main spindle, C-axis NC-controlled pressure ring Saw/drilling/milling aggregate - Spindle protrusion: 2-sided - Saw holder: mounting flange D=40 mm, pitch circle 52 mm - Saw blade diameter: max. 240 mm - Cutting depth: max. 85 mm - Drilling and milling holder: up to 16 mm shank diameter - Tool overhang: max. 85 mm - Speed: max. 14400 1/min Tool length control Power-pack incl. CE safety system - High-speed element for the X-axis traversing portal drive - Traversal speed of the two X drives at 100 m/min Note: Oscillating plate arrangement is omitted. Automatic tool changer magazine with 14 positions Hedpfx Aozy N Eyslmofl - moves along with the support in the X direction - Tool holder: HSK63 - Tool weight: max. 6 kg total weight incl. HSK holder - Tool diameter: max. 130 mm when fully occupied Max. 260 mm with smaller tool diameters or available space on the secondary positions - Tool change time: approx. 12-18 sec. Vertical drilling aggregate with 21 drilling spindles - Stroke in the Z direction: 60 mm - Drilling depth: max. 38 mm (with special drill bit up to 55 mm) - Direction of rotation: right/left - Speed: 1500 - 7500 1/min, frequency-controlled - Drive: 2.3 kW - Drill holder: d= 10 mm - Total drill length: 70 mm - Drill diameter: max. 35 mm - Spindle spacing: 32 mm Lift table 4000x2100 mm - Load capacity: 3500 kg - Height: 440 mm - Useful stroke: 600 mm - Stacking height: 480 mm - Motor: 2.2 kW, 3 x 400 Volt, 50 Hz - Pump: 8 l/min - Valve voltage: 24 Volt - Lifting speed: approx. 31 mm/sec. - Lowering speed: approx. 31 mm/sec. Belt conveyor 6000x 2250 mm Package processing Special functionality: 3 plates roughing 5600x2250x15 (3x18 mm) Infeed and outfeed, basic support plate on the machine table is taken into account Movable operating terminal Control system power control PC85 Software package with graphical operating programs Woodnest Complete Consisting of: Movable label terminal Software for external PC PICA - label printer Air conditioning system for cooling the control cabinet Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: new, Year of construction: 2019, Emerson Micro Motion F100S Coriolis Mass Flow Meter | 4200 Transmitter | New in Box | 2019 We offer this Emerson Micro Motion Coriolis Mass Flow Meter in excellent, unused condition. The unit comes complete with the original Emerson 4200 transmitter, calibration certificate, documentation, software CD, and original packaging. Hfodpfx Ajzpaagjlmol Condition: Unused surplus stock. Sold exactly as shown in the pictures. Delivery: Ex Works Rotterdam, The Netherlands. Payment: 100% in advance. Sold as is, where is, without warranty or guarantee.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Hfedpezxn Ecofx Almel Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA