Used Cask Can Making Line for sale (38,121)

Condition: good (used), Year of construction: 2018, overall weight: 50 kg, total length: 830 mm, total width: 180 mm, total height: 150 mm, Make: CERAZIZIT Type: CORALINE HDG-2 Year: 2018 Length:830mm Width:180mm Height:150mm Weight:50kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hfjdpfx Ajz Aqy Dsk Uol

Condition: excellent (used), PIERALISI Centrifugal Decanter – Stainless Steel PIERALISI industrial centrifugal decanter, designed for the continuous solid-liquid separation of products and suspensions using centrifugal force in industrial processes within the food industry. The equipment uses a high-speed horizontal drum with an internal screw conveyor, allowing for the continuous separation of phases with different densities. The solids are transported to the discharge area while the separated liquid phase is continuously evacuated. Its industrial construction in stainless steel, continuous operation, and compact design make this decanter a particularly interesting solution for processes that require clarification, separation, concentration, or solid recovery. MAIN FEATURES -Manufacturer: PIERALISI -Type: Horizontal centrifugal decanter -Application: Solid-liquid separation -Separation process using centrifugal force -Rotating horizontal drum -Internal screw conveyor for solid transport -Continuous separation and discharge -Continuous industrial operation -Construction primarily in stainless steel -Motorized drive -Protected work areas -Robust design for industrial use -Integrable into existing processing lines -Suitable for clarification and concentration processes PROCESS The PIERALISI decanter is designed to continuously separate components of different densities present in a pumpable product. The product enters the rotating drum, where the high centrifugal force causes the phases to separate. The denser solid components move towards the drum wall and are transported by the screw conveyor to the discharge, while the separated liquid phase is continuously evacuated. Hfjdpfxezxcbfj Ak Uel This principle allows for the following operations: Solid-liquid separation Clarification Solid concentration Dehydration Product recovery Separation of pulps and suspensions APPLICATIONS Especially suitable for food industries, fruit and vegetable processors, oils, juices, and other liquid products with suspended solids, depending on the equipment configuration. PIERALISI centrifugal decanters can be integrated with feed pumps, tanks, filtration systems, clarification systems, and other separation or processing stages. Its continuous operation allows it to be incorporated as either a stand-alone unit or within a complete industrial line. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Two Complete Industrial Powder Coating Lines – For Sale | Facility Rental & Contract Powder Coating Available Two complete conveyor-based industrial powder coating lines with multi-stage pretreatment and associated equipment, suitable for aluminium and steel components: Line 1: max. workpiece size 650 × 1,650 × 3,000 mm Line 2: max. workpiece size 550 × 1,100 × 2,000 mm – a modern, high-capacity powder coating line, designed for efficient industrial production and larger production volumes. Both lines are currently installed in Hungary and are available for inspection. If you purchase a powder coating line, you can also rent the production facility where the line is currently installed. This means the line can remain in its current location and production can continue there. Hedozx D Adopfx Ak Uefl We also have available powder coating capacity and welcome enquiries for contract powder coating services. We are happy to provide quotations based on your products, quantities and coating requirements. Interested in purchasing a complete line, renting the production facility, or looking for a reliable powder coating partner? Contact us for further details and a quotation.

Condition: good (used), Year of construction: 2013, The Vemag Robot 500 is a versatile vacuum filling machine commonly used in food production, especially in meat processing. When equipped with the FM250 gourmet patty former, it offers specific features that are highly useful in patty production. Vemag Robot 500 High Production Capacity: Designed for continuous filling processes, it offers high-speed performance. Vacuum Filling: Ensures minimal air incorporation into the product, enhancing product consistency and quality. Versatility: Can be adapted with various attachments for different applications (sausages, patties, etc.). Portioning Accuracy: Provides consistent portion control, reducing waste and ensuring uniform product sizes. Stainless Steel Construction: Durable, easy to clean, and complies with hygiene standards. Easy Operation and Cleaning: Designed for easy disassembly, making it user-friendly for maintenance and cleaning. High Performance: Suitable for a wide variety of food products, including meat, dough, or fillings. Power: 4,9kW Weight: approx 800kg FM250 patty former Automatic Patty Formation: The FM250 allows for automated hamburger patty formation, streamlining the process. Adjustable Patty Sizes: Customizable patty diameter and thickness to suit different product specifications. High Output: Capable of producing large quantities of patties in a short period, increasing productivity. Consistent Shape and Weight: Ensures uniformity in each patty, crucial for large-scale production. Easy Integration: Attaches seamlessly to the Vemag Robot 500, making the production setup efficient and smooth. Precise Portioning: Ideal for producing standardized patties with minimal waste. Power: 2,5kW Weight: 340kg This combination of the Vemag Robot 500 and FM250 attachment is excellent for efficient, large-scale hamburger production with high precision and consistency. Efficiency: up to 300 portions/min Hfsdpfx Akjuk H A Ro Uol Dimensions of a complete line: L: 4000 x W: 1200 x H:2200mm

Condition: good (used), PEZZOLATO TM 400 – PROFESSIONAL LOG SPLITTER / WOOD PROCESSING MACHINE For sale: a professional log splitter from PEZZOLATO, model TM 400. This machine is designed for mechanical cutting and splitting of firewood. Its robust, industrial construction makes it ideal for farms, companies involved in firewood production, or wood processing plants. THE MACHINE IS 100% FUNCTIONAL AND READY FOR WORK. In addition, the discharge conveyor is equipped with a NEW BELT. TECHNICAL SPECIFICATIONS: • Manufacturer: PEZZOLATO S.p.A. – Italy • Model: TM 400 • Year of manufacture: 2009 • Machine number: SES3714 • Electrical power supply: 400 V • Electric motor power: 15 kW • Machine weight: approx. 1600 kg • Chainsaw • Maximum cutting diameter: approx. 400 mm • Hydraulic splitting system • Discharge conveyor • NEW discharge conveyor belt • Option for tractor drive via PTO DRIVE: The machine can be powered in two ways: 1. Electric motor – 15 kW / 400 V 2. From a tractor via the PTO shaft – mechanical drive provided by the manufacturer Thanks to the PTO drive option, the machine can also be used in locations where there is no suitable electrical power supply. Hfodpfxoz Awv Ee Ak Usl TECHNICAL CONDITION: The machine is fully functional and ready for further use. The saw, hydraulic system, log splitter, and conveyor are all working correctly. The discharge conveyor belt is NEW. Visually, the machine has normal signs of use and wear. These are signs resulting from the machine's use and age. The machine is used but technically sound and regularly maintained. DOCUMENTATION / NAMEPLATE: PEZZOLATO S.p.A. Model: TM 400 Year of manufacture: 2009 Machine number: SES3714 Electrical cabinet: • 400 V • 50 Hz • Nominal current 50 A • IP54 • Year of manufacture 2009 SALE: Sold complete, in the configuration shown in the photos. It is possible to view the machine and test its operation before purchase.

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, overall weight: 20,000 kg, input voltage: 380 V, power: 50 kW (67.98 HP), warranty duration: 12 months, Equipment: CE marking, compressor, crane, documentation/manual, For sale is a new, fully equipped production line for PLA and PET bottle preforms and bottle blowing. The line was manufactured in August 2025 and delivered to Lithuania. The entire factory is 100% fully equipped, offering the buyer a very promising and profitable business opportunity. It enables the production of BIOBASED, biodegradable bottle packaging throughout the entire cycle, from preform to finished bottle. The line includes all molding and blowing molds, as well as EU standard bottle cap molds, robots, and all necessary accessories. Both PLA biopolymers, PBAT, PET, and rPET materials can be used. Line capacities: 1. Bottle preforms – 12,000,000 and more per year. 2. Bottle caps – 17,000,000 per year (28/1881 and 38/3S 1881). 3. Semi-automatic bottle blowing – 2 machines, 1,000,000 per month. Equipment: 1. Injection machine – 180 t (for preforms). 2. Injection machine – 150 t (for caps). 3. Coolers – 2 pcs. (for injection machines). Hfjdpfx Akszv S Uvj Ujl 4. Full set of robots – 2 pcs. (for injection machines). 5. Injection molds – 6 pcs. (4 preform molds, 2 cap molds). All molds comply with standards (for milk, yogurt, beverages, juices, and other industries). The molds are fully equipped with hot runner systems. 16 gr / 38 3S, 20gr 38 3S, 36 gr 38 3S, 20 gr 1881 28 mm. Cap molds – 38 mm/3S and 28 mm 1881 (the cap remains on the neck). 6. Dryers – 2 pcs., 300 and 400 kg. 7. Blowing equipment – 38 mm/3S (full set). 8. Blowing equipment - 28 mm/1881 (full set). 9. Blow molds - 4 pcs. (38 mm: 250 ml, 500 ml, 1000 ml; 28 mm: 500 ml). 10. Refrigeration unit (for blowing line). 11. Compressor (for blowing and molding). 12. Air dryer (for blowing and molding). 13. Other equipment (conveyors, mixers). All production equipment is standardized and meets all EU and manufacturer requirements. This represents an excellent opportunity to start your own profitable and promising business. The asking price for the entire line is 160,000 EUR. We also have a twin-screw compounder for the production of biopolymer mixtures for use in the line. With a serious buyer, we can coordinate the entire package, including all laboratory food contact tests and all other solutions for production.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, total length: 3,200 mm, For sale: a new CIDAN RAPIDO 32 electric guillotine from our showroom. The machine has not been used in production and is connected and fully ready for operation. It can be viewed in person, tested, and trial cuts can be performed. The machine is in stock – fast delivery is possible. The CIDAN RAPIDO is a fast and reliable electric guillotine designed for precise sheet metal cutting. The machine can perform up to 35 cuts per minute, making it ideal for both individual jobs and intensive series production. The drive system with eccentrics, the material clamping system, and the sheet support elements mounted close to the blades allow for convenient and precise cutting, even of narrow strips. The guillotine has angular supports on both sides of the front table, ensuring accurate sheet feeding at a 90° angle. LED lighting in the cutting area allows the operator to clearly see the cutting line. Key information: Manufacturer: CIDAN Machinery Model: RAPIDO 32 Condition: New / showroom machine Working length: 3200 mm Max. steel thickness: 2.5 mm Max. stainless steel thickness: 1.6 mm Max. aluminum thickness: 3.7 mm Cutting speed: up to 35 cuts/min. Weight: approx. 2100 kg CUTLINK control and automatic back gauge The guillotine is equipped with the CIDAN CUTLINK control system – a fast and easy-to-use program that allows up to 10 different operations to be programmed simultaneously. After the operator enters the required dimensions, the 750 mm automatic back gauge automatically adjusts to the required position, allowing for quick and accurate cutting of different widths. Sheet support and return The pneumatically controlled sheet support system allows for control of the material during cutting. After cutting, the cut sheet is directed to the front material trolley, so the operator does not need to collect parts behind the machine. The trolley can be easily removed and transported, and also picked up with a forklift. Additional equipment included with this machine: Telescopic extension of the front table up to 800 mm from the cutting line – for easier positioning and support of large sheets. Material trolley – for collecting cut sheets and convenient transport to bending or other machines. LED cutting area lighting. Automatic 750 mm back gauge. CUTLINK control system. Ideally suited for sheet metal processing, roofing and facade manufacturing, ventilation, and other sheet metal processing companies. The machine is located in our showroom, connected, and ready for demonstration. Fast delivery is possible. Hsdpfx Aezz Rqtok Uefl If you have any further questions, please do not hesitate to ask.

Year of construction: 2021, condition: used, Eillert G-1500 Vegetable Cutting Line – As New Condition – Only 147 Operating Hours Available Immediately An exceptional opportunity to acquire an Eillert G-1500 universal vegetable cutting line in genuine as-new condition. This machine has only 147 operating hours and is supplied complete with a preparation table, outfeed conveyor, and three interchangeable knife sets. The G-1500 is a highly versatile vegetable cutting machine designed for medium-capacity production environments, including fresh-cut vegetable processors, salad factories, commercial kitchens, and food manufacturing facilities. It is suitable for processing a wide range of products including lettuce, cabbage, leeks, carrots, peppers, beans, herbs, and many other vegetables. Included in this Offer - Eillert G-1500 vegetable cutting machine - Stainless steel preparation table - Outfeed conveyor - 3 interchangeable knife sets - Touchscreen control panel - Mobile stainless steel construction - Complete and ready for production Key Features - Only 147 operating hours - Genuine as-new condition - Hygienic stainless steel design - Quick-release belts for fast cleaning and sanitation - Cutting compartment fully separated from mechanical components - Interchangeable knife system for maximum flexibility - Precise scissor-cutting principle for excellent product quality and shelf life - Suitable for leafy vegetables, root vegetables, herbs, and many other products Technical Information - Model: Eillert G-1500 - Capacity: approximately 100–800 kg/hour depending on product and cut size - Cutting range: 1–50 mm - Power supply: 400V / 3 Phase - Power consumption: approximately 1.25 kW Hfjdjzgfyajpfx Ak Ujl - Stainless steel construction - Variable belt speed - Dual knife speed system Condition This machine has seen extremely limited use and has accumulated only 147 operating hours since new. The overall condition is excellent, both mechanically and cosmetically, making it a perfect alternative to purchasing a new machine at a significantly higher investment. Applications Suitable for processing: - Lettuce and leafy greens - Cabbage - Leeks - Carrots - Peppers - Beans - Herbs - Cucumbers - Onions - Various fresh-cut vegetable products Machine can be inspected and tested under power by appointment. Location: Emmeloord, The Netherlands Condition: As New Availability: Immediate

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Hsdpozy E Drjfx Ak Uofl Automatic level and pressure monitoring Technical specifications can be found in the attached PDF document.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Hedpfx Akez Ad Dcs Uofl Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: used, Year of construction: 2022, Overview Complete PET bottling line for still mineral water in 6.0 L PET bottles with handle, max. 6,000 bottles/h. The heart of the line is an SMI ECOBLOC ERGON blow moulder-filler-capper combiblock, followed by handle application, rotary labelling and robot palletizing. Built in 2022, started up in 2023 and run only 3 to 4 times a year. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle, single bottle with handle and EAN barcode - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap - Pallet: Euro pallet Scope of Delivery - Blow moulder-filler-capper combiblock | SMI | ECOBLOC ERGON 6-20-5 HC EV | blow moulder for 6 moulds (moulds not included), filler with 20 filling valves, capper with 5 capping heads, cap sorter and cap elevator | 2022 - Discharge conveyor | SMI | bottle conveying from the combiblock | 2022 - Accumulation table | SMI | FIFO | for filled bottles | 2022 - Bottle divider | SMI | DV 500S ERGON | 1 lane in, 2 lanes out | 2022 - Drying tunnel | EUROPOOL | before the handle applicator | 2022 - Handle applicator | TWINPACK | double lane, with barcode applicator | 2022 - Drying tunnel | EUROPOOL | before the labelling machine | 2022 - Bottle combiner | SMI | 2 lanes in, 1 lane out | 2022 - Conveyor | SMI | from the accumulation table to the labelling machine | 2022 - Rotary labelling machine | P.E. LABELLERS | ROLLMATIC MODULAR TOP SL 960 10T | 2022 Hfsdsz Ag U Depfx Ak Uol - Conveyor | SMI | from the labelling machine to the palletizer | 2022 - Palletizer | BEMA | 2 FANUC robots, interlayer device | 2022 - Electrical panels | main distribution panels with all components for all machines and conveyors | 2022 - Format parts and spare parts | all available format and spare parts Not included Pressco preform and neck inspection, Heuft fill-level and cap inspection, pallet wrapper, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder, low-pressure compressors, utilities, piping and wiring from the main distribution to the machine panels, civil works. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEMs plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the line must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: ready for operation (used), Year of construction: 2019, Rondo Doge Polyline make up pastry line year of build 2019 overall length 830cm conveyor belt width 64cm microprocessor control system touchpanel 99 program memory slots belt speed 0.5 – 8 m/min cutting station foot control flour duster water drip device guillotine compact panning machine Hodpfx Aozgcgwok Uofl year of build 2022 several cutting knives

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R Hfjdsxgd Hfjpfx Ak Uol We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW • Voltage: 400 V • Year of manufacture: 2014 Machine Description: The FillMatic MSE machine serves as a mattress core stacker. • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Hedpfez Agv Uex Ak Uofl - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Hfjdpfx Aezy Itvek Usl Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site.

Condition: excellent (used), Gravity-Fed Linear Filler – Stainless Steel Automatic, gravity-fed linear filler made of stainless steel, designed for the continuous filling of liquid products into bottles, jars, and other rigid containers within industrial packaging lines. The equipment incorporates multiple filling nozzles arranged in a line, allowing for the simultaneous processing of several containers. The product is dispensed by utilizing gravity, providing a simple and efficient solution for low-viscosity liquids and products with good flow characteristics. Its construction primarily in stainless steel, integrated conveyor, and protected filling area make it particularly suitable for professional applications in the food and beverage industry. MAIN FEATURES -Type: Automatic, gravity-fed linear filler -Filling system: Gravity feed -Linear, multi-nozzle configuration -Simultaneous filling of multiple containers -Automatic container feeding -Controlled positioning under the nozzles -Integrated infeed and outfeed conveyor -Continuous industrial operation -Construction primarily in stainless steel -Product distribution circuit -Enclosed filling area with guards -Hygienic design for the food industry -Compact and robust construction -Integrable into automatic packaging lines PROCESS The containers are automatically transported to the filling area, where they are positioned under the different nozzles. Once positioned, the filling process is carried out using gravity, taking advantage of the height difference and the natural flow of the product to introduce it into the containers. At the end of the cycle, the containers are released and automatically continue to the next stage of the line. This filling principle is particularly suitable for liquid and fluid products with low viscosity. It can be integrated with: Container feeders Feed tanks Transfer pumps Capping and sealing machines Twist-off closing machines Weight checkers Inspection systems Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Particularly suitable for food industries, beverage manufacturers, canning companies, liquid sauce producers, and packaging companies that need to automate the filling of fluid products. Depending on the installed configuration and the characteristics of the product, it can be used for water, juices, beverages, vinegars, brines, oils, liquid sauces, and other low-viscosity products. Its linear, multi-nozzle configuration, gravity-fed filling, and stainless steel construction provide a versatile solution for industrial packaging lines. Machine available for inspection. Hodpfozxch Sex Ak Usfl Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: Hedpfx Akjz Ag Rre Uofl - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Hfsdpfsz Agw Eox Ak Ujl - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. Hfjdpfx Ajz Ahr Rek Uel The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, number of slots in tool magazine: 20, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software. For clarification: this is a machine that, during the melting process (all 10 layers in standard configuration with a layer thickness of 0.05 mm), also performs surface finishing through HSC milling. This means that the contour is milled to the exact dimensions every 0.5 mm, resulting in clean surfaces as typically seen in CNC milling. The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Build volume: 250x250x185 Gallery of manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Hedpfx Aezm Ub Hsk Ujfl Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- Hfsdpfx Akezcf Dlo Uel 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Year of construction: 2008, condition: used, functionality: fully functional, Blažek ABM-5 D stick packaging line for sale – 3 machines available For sale are three fully functional Blažek ABM-5 D stick packaging lines, including downstream collection stations. These systems were specifically developed for the precise filling of fine-grained sugar and feature volumetric dosing for granules and crystalline raw materials. Thanks to their robust design and reliable technology, the machines are also suitable for numerous other free-flowing products with comparable properties. Technical specifications: Manufacturer: Blažek Type: ABM-5 D Dosing system: Volumetric dosing Suitable for: Fine-grained sugar Granules Crystalline raw materials Current configuration: 5 sticks per cycle Includes downstream collection station Machines are fully functional Available systems: Year of manufacture 2008 Year of manufacture 2008 Year of manufacture 2016 Condition All systems are in functional condition. A demonstration in test operation on-site is possible by arrangement, so that interested parties can be convinced of the function and performance of the machine. Inspection An inspection of the systems is possible by appointment. We will gladly provide further technical information, pictures, or a test run video. If you are interested, we look forward to hearing from you. Hfjdpfezvww Njx Ak Uel

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: Hjdpfx Aoq Nd U Hsk Uefl - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Main features: Hsdeyuf T Ropfx Ak Uofl - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Condition: good technical condition, ready for operation. Price: negotiable For serious inquiries, please contact by email.

Condition: new, Year of construction: 2027, functionality: fully functional, TRANSFER TYPE POWDER COATING LINES The transfer type conveyor consists of a combination of conveyor rails. The effective powder coating system layout is designed by our project department according to your workshop dimensions based on the products to be coated and daily quantities. Workpieces are loaded onto the bars which are moved manually or automatically to bring the products to the needed, booth or oven. The advantage of this system is that the products are loaded on the conveyor and do not tire the operator as they move on the conveyor until the end of the process, so it is an efficient system. Hedpfx Akjvv H Uue Ujfl The movement of the bars can be automated at any point in the system, making the entire conveyor line a cost-effective alternative to power&free conveyors. In the painting system, automatic coating can be achieved by adding a conveyor system above the powder or paint booth and adding a reciprocator and automatic gun to the coating booth. We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations