Used Canapa Fully Automatic Strapping Machine for sale (79,836)

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Kedpfx Akoukvgrexslr Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616004, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616004 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade Kjdpfowd I Idex Akxolr ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package Ksdet Uzv Tepfx Akxolr • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: good (used), Year of construction: 2012, operating hours: 21,200 h, functionality: fully functional, Non-stop sheet feeder with pre-stacking device Non-stop delivery with roll cloth Raised by 30 cm, including platform elevation Three-phase auto transformer Hold-down device for thin or wavy material Die plate fine adjustment system Small sheet device (min. sheet size 300 x 350 mm) Mechanical double sheet detector Side lay markers on operator and drive side Strip insertion unit in the delivery section Standard blanking frame Quick-lock closing frame with fixed make-ready plate Blanking station Kjdeyxr D Ejpfx Akxelr Touch-screen control Centerline system Without compressor

Condition: good (used), Year of construction: 2014, Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. - Up to approximately 30 strapping cycles per minute. - Frame inner dimensions approximately 850 x 600 mm. - Secure strapping with 12 mm strap. - Automatic strap feed and return. Kledpfxeyxqwqo Akxjr - Adjustable strap tension. - Strapping can be triggered via button or alternatively, automatic mode selectable (sensor in the tabletop). - Simple and ergonomic spool change and threading system. - Equipped with ergonomic roller conveyors on the tabletop. - Working height approximately 820 mm. - Machine can be moved on castor wheels. The machine can be demonstrated under power.

Condition: good (used), Year of construction: 2017, Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to approximately 30 strapping cycles per minute. -Frame internal dimensions approximately 850 x 600 mm. -Secure strapping with 12 mm strap. -Automatic strap feed and return. -Adjustable strap tension. -Strapping can be triggered via hand button or foot switch, or alternatively automatic operation selectable (sensor in the tabletop). -Simple and ergonomic spool change and threading system. -Equipped with ergonomic roller conveyors on the table surface. -Working height approximately 820 mm. Ksdpfoyxqrnjx Akxjlr -The machine is mobile on castors. -The machine can be demonstrated under power.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 39654, type of input current: three-phase, There is still one machine available. The machine has been tested and is ready for operation. Ksdpsw Axb Sefx Akxolr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Mosca ROM P5 strapping machine, arch 500 x 400 mm, 5 mm strap, throughput 50 to 55 cycles per minute, automatic strap feeding and ejection, electronic tension adjustment via potentiometer. 3 units in stock. Also available: Mosca ROM P5 strapping machine with 600 x 500 mm arch from 2009, Mosca ROM Fusion with 600 x 500 mm arch from 2013, and Mosca ROM P4 with 500 x 400 mm arch from 2004. Kljdpfsyxmzljx Akxor

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. Kedpfxoyur Axj Akxelr This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: good (used), Year of construction: 2002, functionality: fully functional, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section Klsdpfx Aerx Ryfokxjr The machine is available from our stock in Hofkirchen/Austria. The machine can be seen on site on appointment.

Condition: used, Year of construction: 2021, functionality: fully functional, Fully automatic sealing packaging line PRATIKA 80-T MPS for sale! The basket sealing packaging line consists of equipment from various manufacturers, integrated into a single technological line that complies with CE safety directives and has been certified accordingly. The basket sealing packaging line consists of: · PRATIKA 80-T MPS, year of manufacture 2021 · 2 pcs. x 1.80 m conveyors with positioning system · 1 pcs. x 2,70 m conveyor · 2 pcs. x 3 m conveyors · 1 pcs. x 3,30 m conveyor (at the control panel) Kljdpfx Aksyxd Nmjxsr · 1 pcs. x 1,10 m conveyor · 2 pcs. push cylinders · Control Panel with Siemens controller · Electrical cabinet · Security fences Packaging line requires approx. 4 × 11 m of floor space. Layout on request. PRODUCTS SIZES. This line was used to package products with the following dimensions: Kompelement mesh basket size 500x350x160 mm. Productivity in hour 1470 pcs. Kompelement mesh basket size 500x580x160 mm. Productivity in hour 1260 pcs. Kompelement mesh basket size 750x350x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 750x580x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 1000x350x160 mm. Productivity in hour 840 pcs. Kompelement mesh basket size 1000x580x160 mm. Productivity in hour 744 pcs. Jonaxel mesh basket size 459x501x137 mm. Productivity in hour 1260 pcs. TECHNICAL CHARACTERISTICS PLC Programmable Logic Controller Siemens Input/output monitor HMI Siemens Conveyor system speed up to 20 m/min Packing system capacity up to 25 bags per minute with every second bag inserted Maximum packaging film thickness 50 microns Maximum packaging film roll diameter 350 mm Note: Labeling, printer, filter and lasers shown in the photos are not for sale.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 109767, Fully automatic longitudinal strapping machine, Mosca Evolution SoniXs TR-I 6 Pro, year 2015, 5 mm strap, throughput 35 strapping cycles per minute, ultrasonic sealing system, brushless motors, automatic strap ejection in case of end of coil or empty strapping, settings via touchscreen. Kodpfx Akeyxc Ubsxolr

Condition: like new (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Offering an as-new DMG MORI bar guide with 2000 operating hours, including an IEMCA BOSS 338 Type 32LL bar feeder. Kljdpfoyw S Emsx Akxsr

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, FOR SALE: Dubuit Far East CS-1 Automatic UV Screen Printing Machine 2-Colour Double Head OVERVIEW An exceptional opportunity to acquire a near-new, fully optioned Dubuit Far East CS-1 2023 automatic UV screen printing machine, commissioned in the UK in 2024 barely used since installation. The machine is in full working order and available for inspection at our facility. New replacement cost for this specification $217,000. New units carry a 6+ month lead time from OEM. This machine is available for immediate collection or delivery. MACHINE: DUBUIT FAR EAST CS-1 The CS-1 is a high-speed, compact automatic screen printing machine designed for cylindrical containers. It uses LED UV technology for fast curing, strong colour results, and precise registration. All motion is servo-driven (Schneider Electric PLC and motors) ensuring consistent, repeatable print quality. FACTORY-FITTED OPTIONS (as invoiced): - Double printing head with additional servo and ball screw (2-colour capability) - Registration by sensor under printing position Kodpeyw Sa Defx Akxslr - Pre-registration station with additional servo and colour sensor - Counterpoint under printing - Peristaltic ink pump per head - Antistatic system including power supply - Extra set of jigs - Pick and place infeed for standing bottles - Turntable - Increased stroke to 230mm per colour (upgraded from standard 190mm) - VPN for remote access TECHNICAL SPECIFICATIONS: - Object type: Cylindrical containers - Diameter range: Ø 10mm to 88mm (mandrel) - Object height: 20mm to 210mm (modified) - Maximum print area: 200mm - Maximum print stroke: 270mm - Speed: Up to 4,000 pcs/hour (1 colour); ~1,900 pcs/hour (2 colour with pre-registration) - UV system: LED UV, 80mm long, 16W/cm - Carousel: Vertical, 9-mandrel - Drive: Full servo — Schneider Electric PLC and servo motors throughout - Control: Touchscreen HMI with recipe storage, object counter, stroke/speed settings, troubleshooting guide - Remote access: VPN capability included - Electrical: 5 kW/H (print module) - Air: 6 bar main pressure, 3 NM³ print module - Machine footprint: 1.4m (L) x 1.45m (D) x 1.95m (H) - Net weight: approx. 2,070 kg ALSO INCLUDED: - Dubuit Far East Big Unscrambler Model 712 (1,500mm diameter disk type) - Full original operator manuals - All original factory documentation including technical drawings and electrical wiring diagrams CONDITION: Fully functional. Barely used since UK delivery in 2024. Available for powered demonstration by prior arrangement. LOCATION: Oxford, United Kingdom COLLECTION: Buyer collects preferred. UK delivery can be arranged. International shipping available — please enquire.

Condition: used, Year of construction: 2006, operating hours: 27,000 h, functionality: limited functionality, input voltage: 400 V, control voltage: 24 V, compressed air connection: 7 bar, input frequency: 50 Hz, punching force: 17 t, We are offering this used automatic punching machine TRUMPF TRUMATIC 3000 L, Klsdpeyw Nwyefx Akxsr

Condition: excellent (used), Model: JK-2 Power supply: 230 V Number of phases: 1 Frequency: 50 / 60 Hz Power: 0.56 kVA Ksdpfx Aksyubk Ejxslr

Condition: excellent (used), Year of construction: 1997, Manufacturer: Brüninghaus Verpackungssysteme GmbH & Co. KG Kodpsyubh Dsfx Akxelr Year of manufacture: 1997 Machine serial number: 1390542 Model: SKL-90

Condition: used, Year of construction: 2002, functionality: fully functional, stroke length: 2,600 mm, overall weight: 12,000 kg, punching force: 20 t, Amada Europe 2510 machine, in perfect working condition. Sheet metal working dimensions: 3500 mm x 1500 mm, with thicknesses up to 5 mm. Equipped with a fully operational automatic loading system. Kledoywwztopfx Akxor

Condition: new, Year of construction: 2026, semi-automatic labelling machine FL-100 Labelling machine FL-100 product diameter: 15 - 130 mm label width: 15 - 200 mm label length: 15 - 600 mm Roll diameter: 300 mm Kedsfnkbrepfx Akxolr core diameter: 38 - 110 mm dispensing speed: 4 - 20 m/min Supply voltage: 230 V / 50 Hz Weight: Approx. 36 KG Dimensions: 800 (L) x 500 (W) x 400 (H) mm

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width Kedpfx Aksywuqrsxslr The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Condition: excellent (used), High-quality and very clean condition – well maintained automatic shrink wrapping line consisting of Lady Pack Auto 60 shrink wrapping machine and Madax shrink tunnel. Klsdpfx Aksywpabexsr This is a reliable industrial packaging solution suitable for a wide range of products including boxes, printed materials, cosmetics, food products, and general consumer goods. The machine offers automatic operation, making it ideal for efficient and consistent packaging in production environments. Main features • Manufacturer: Lady Pack (Italy) • Model: Auto 60 • Automatic shrink wrapping machine • Included shrink tunnel: Madax • Complete packaging line • Industrial quality construction • Easy operation and maintenance Condition The machines are in good working condition. Previously used in production and well maintained. Logistics Machines are available for immediate pickup. Loading assistance available. Located in Finland. Additional information • Suitable for industrial and commercial packaging • Reliable and proven technology • Compact and efficient line. Higher capacity alternative to semi-automatic machines. Can be connected and tested before purchase. After all, very clean condition – well maintained and ready for production use. Keywords: Shrink wrapping machine Automatic shrink wrapper Lady Pack Shrink tunnel Packaging machine L sealer

Condition: used, Year of construction: 2011, Technical data: - VEN SPRAY PERFECT automatic spraying machine - Year of manufacture: 2011 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Parts detection via light curtain - CNC 7000 control system - Right-hand side operation - Z16 dual gun drive - Water-sprinkled extraction system - Extraction system in stainless steel design - Extraction nozzle diameter 500 mm Kljdpfx Akoytuadoxsr - Exhaust air capacity 10,000 m³/h - Paint recovery system via V-band - Feed speed continuously adjustable 3 - 9 m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 2 pcs. - Number of installed spray devices 4+4 pcs. - Number of material pumps 2 pcs. - Supply air filter ceiling G5 - Length ~ 6,590 mm - Width 3,666 mm (+1,152 mm) - Height 2,500 mm - Total connection 22 KW - Volts, Hz 400 / 50 - Colour RAL 7035 - Location, in stock from Voltage fluctuations max. +/- 5 % The photos show the spray machines before the overhaul. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, table length: 2,500 mm, table width: 1,250 mm, Available: medium-format Trumpf CNC punching machine, complete with SheetMaster, SortMaster Box Linear Special, and GripMaster. All functions available: multi-tool, threading, high-speed marking, SoftPunch. Punching force: 220 kN, max sheet thickness: 8 mm, X/Y travel: 2535 mm / 1280 mm, max workpiece weight: 200 kg, X/Y feed rates: 100 m/min / 60 m/min, simultaneous: 116 m/min, punching/marking rate: 1200/min / 2800/min, C-axis tool rotation: 330 rpm. Machine dimensions X/Y: approx. 6800 mm / 6100 mm, weight: approx. 15,000 kg, operating hours: approx. 58,000 h. Documentation available. On-site inspection possible. Offers and videos of the plant in operation can be provided upon request. Kodpeywg Agefx Akxelr

Condition: used, Size max 360x310 mm min 100x85 mm Number of stitches Standard 2-10 Staggered 2-5 Continuous 2-9 Stitching length 15.7mm Speed max 9000 c/h min 900 c/h Power requirements 1.8 kW (220/380V, 50Hz) Length 4744mm Width 1035mm Weight 3135 kg (approx.) Kljdpjwkufijfx Akxsr Equipment • 1 set of tools • 1 set of electrical diagrams • 1 set of operator manuals • 1 spare part catalogue • standard equipment

Condition: good (used), Machine number 20703-14303 Kodpfx Aovwkgkekxelr Built in 1989 Size max 320 x 420 mm min 90 x 150 mm Speed max 9000 c/h Number of stitches Standard 11 Power requirements 2,5 kW (220/380V, 50Hz) Air requirement (6 bar) 200 m³/h Length 2530 mm Width 1550 mm Height 1600 mm Weight 2300 kg (approx.)