Used Calende Forging Press for sale (12,304)

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Psdps E Dquofx Af Serb Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Pjdpfx Afsz Ayq Ej Sjrb Fully functional.

Condition: good (used), Year of construction: 2004, Well-maintained, used press brake from Ermaksan. Type: AP 2600 80 Capacity: 2600 x 80 tons NC control Podpfx Aoz Aihmef Ssrb Includes a set of tooling.

Condition: used, Year of construction: 1988, total length: 1,250 mm, total width: 1,250 mm, total height: 2,400 mm, Colour: Blue Empty weight: 3.000 kg Price: On request - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 4441 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 50 - Min. stroke [mm]: 0 - Max. stroke [mm]: 85 - Table length [mm]: 440 - Table width [mm]: 700 - Table bore diameter [mm]: 270 - Ram width [mm]: 300 - Max. opening height [mm]: 360 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 145 - Transport dimensions: 1250mm x 1250mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Pedpfx Asz Avbtof Sjrb VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Predpsyapdqefx Af Sob Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 1361, product width (max.): 330 mm, working width: 330 mm, product height (max.): 1,000 mm, number of drawers: 8, power of the servo motor: 75 W, roll diameter: 70 mm, year of last overhaul: 2023, type of input current: DC, overall weight: 8,600 kg, total height: 2,300 mm, total length: 10,000 mm, total width: 1,500 mm, warranty duration: 0 months, Equipment: documentation/manual, OMET FLEXY – 2008 MODEL • 8 Colors • Printing Width: 33 cm • Cold Foil + Hot Foil • Reverse-Side Printing • GAP MASTER + 3 Separate Die-Cutting Units • Full UV Coating • Motor Power: 100 kW Prjdez Di Efspfx Af Sob

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical specifications of the DURMA AD-S 30175 press brake: number of axes: 4 (X, Y1, Y2, R) maximum pressing force: 175 t maximum bending length: 3050 mm slide stroke: 265 mm reach: 410 mm approach speed: 140 mm/s bending speed: 10 mm/s return speed: 130 mm/s distance between columns: 2600 mm dwell time: 102 ms dwell distance: 8 mm safety distance: 263.2 mm oil tank volume: 200 l maximum operating pressure: 285 kg/cm2 motor power: 18.5 kW Podpfx Afjz Diu Te Sorb current: 37 A current protection: 50 A control voltage: 24 V power supply: 3 x 400 V; 50 Hz dimensions (L x W x H): 5450 x 2550 x 2750 mm weight of the DURMA AD-SERVO 30175 machine: 10830 kg Equipment of the DURMA press brake: CNC control unit: CYBELEC ModEva 10S manual deflection compensation European-type tool clamping system European-type punches and dies powered back gauge front supports with T-slots and tilting stop

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Psdpfegg Nn Sox Af Serb Safety valve with cylinder end position. CE marking

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with draw cushion - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm can be retrofitted with: - new control system, new control cabinet, light curtain (1 cycle, 2 cycles, protection), new hydraulics, Pjdpoycl Evsfx Af Sorb - new seals - new occupational safety inspection

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Press force: 6,300 kN Psdpfxjrivu Se Af Sjrb Working width approx. 6,200 mm DSP Laser TX Connection power: 400 V / 95 kVA 21926

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Container for roll-off tipper trucks 20 m³ usable volume Podpfxezt Niro Af Sjrb technically refurbished repainted in desired RAL color hook lift system on both sides discharge door hinged at the top

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Pedezh Nnwjpfx Af Sorb Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer this Ryobi 522 HXX offset printing press, ready for immediate use, manufactured in the year 2000. It features automatic plate loading, new rollers, and a set of rollers ready for re-rubbering, as well as a sheet counter. Psdpfsz Dnrqox Af Serb If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Prodpfxez Afhps Af Sjb Weight: 270 kg New - unused

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits. Pedpfx Asz Dtaasf Ssrb

Condition: good (used), Year of construction: 1993, Heidelberg SM102FP, ref. 3048 Year of manufacture: 1993 Maximum sheet size: 720 x 1020 mm – CPC 1-04 – Quick-release clamps – Alcolor dampening units Podpfx Afoz D Ew De Serb – Technotrans cooling system, air-cooled – Standard washing system – Perfecting – Grafix Exatronic Plus powder spray system

Condition: excellent (used), Year of construction: 2008, Mossini press Servo drive Pressing force 2,000 kN Stroke adjustment 20 - 100 mm Stroke rate 30 - 90 strokes/min Ram adjustment 100 mm Tool installation height 455 mm Year of manufacture 2008 Includes Kohler conveyor system. Prsdpfxjz Dxh As Af Sjb

Condition: used, Year of construction: 2003, MANZONI Transfer Press Prjdsz Dxitspfx Af Sjb Type: T6302MR/2/12/TE, Year of manufacture: 2003 Pressing force: 6,300 kN Stroke rate: 10-45 strokes/min Stroke length: 600 mm Ram adjustment: 200 mm Table area: 4,000 x 1,700 mm Installation height: 1,100 mm Includes PBK conveyor system.

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes No of positions for the rolls: 2 No of work tables: 1 Prjdpfxszq Urto Af Sob

Condition: used, Year of construction: 2000, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 400 t, stroke length: 75 mm, overall weight: 2,000 kg, MIOS T40 with adjustable speed and with pneumatic feeder. Pjdjz Dg S Ajpfx Af Serb

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Prsdpfjwq Aa Iex Af Ssb Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Prodpfx Aera Rbgef Sjb Idle cycle time: 25 s

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 681852N, total length: 2,200 mm, total width: 1,450 mm, total height: 1,550 mm, Size: 360 x 520 mm Availability: in stock Total impressions: 49.7 million Estimated model year: 1983 Status: discontinued in 2025 Podpfxez D Ernj Af Sorb Maximum sheet size: 360 x 520 mm Minimum sheet size: 105 x 180 mm Maximum speed: 8,000 sheets/hour Printing units: 2 Total weight: 2,850 kg Includes: 2 x Varn Kompac III, automatic, continuous dampening system Eltek elektrostat P22

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Podpjzzbb Nefx Af Sjrb Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level Pedjz Au Hbopfx Af Sorb