Used Boy Two Componentsinjection Molding Machine for sale (68,846)

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t Crodpfozvgu Dex Albeg

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot Crjdpfxszrd Aqj Albsg A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Year of construction: 2006, condition: ready for operation (used), A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible. Cedpfx Alow Iqgvobsrg

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Csdpfx Aloyugctebjrg Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the very end. Cjdpszrb Spsfx Alborg

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Crodozvdbuspfx Albeg Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Credpfxjzvmpno Albog Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Cedpfxozub Hre Albjrg Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: ready for operation (used), An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible. Csdpfx Alszcfi Ieborg

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Csdpfszvmxpex Alberg Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Year of manufacture: 2006 Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg Additional information The machine is equipped with a new screw, which is covered by a warranty. Credezw A Ehopfx Albsg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) Csdpfjw U N Ixjx Albsrg - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Codpfxjzgwa Ee Albjrg Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: excellent (used), Year of construction: 2015, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, injection pressure: 1,212 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Clamping force: 420 t Year of manufacture: 2015 Injection shot volume: 1,100 g Injection unit: 2300 Cedpfx Aljzwdzkobsrg Screw diameter: 70 mm Specific injection pressure: 1877 bar Injection volume: 1212 cc Injection shot volume: 1,100 g Pump motor power: 51 kW Cylinder heater power: 27 kW Screw L/D ratio: 20 Clamping force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Ejector force: 96 kN Tool height: 380 - 825 mm Opening stroke: 770 mm Maximum platen distance: 1595 mm Ejector stroke: 230 mm Oil tank capacity: 78 kW Weight: 21000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Year of manufacture: 2015 Control system: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the fixed platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-drive hydraulic pump activeDrive (energy-saving) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Clamping force adjustment - activeProtect mold protection - Switchover to pressure-based clamping (WID) - PDE process data logging, 100% monitoring - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fencing included

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Control system: Control type: Arburg Selogica Clamping unit: Crjdox Eithspfx Albeg Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Crodpex Rvciofx Albeg Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Unit 5550: 3700 cm3 Codpfox Up U Tex Albsrg

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. Credpfxjzqapdo Albeg For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Codpfxsy Hqwye Albjrg Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: used, Arburg unscrewing unit Model: 118044 Machine number: 12915769 Year of manufacture: 2010 Condition: used Functionality: fully functional Description The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Crsdpfxozpzh Sj Albsg Weight: 30 kg

Condition: good (used), Year of construction: 2001, Battenfeld TM 4500/2800 injection molding machine Year of production: 2001 Control: Unilog B4 4 identical machines available Closing system: Closing force: 4500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing: 800 x 800 mm Mounting plate dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 75 mm Shot weight (PS): 1506 g Injection volume: 1657 cm³ Specific injection pressure: 1739 bar Robot interface: Euromap 12 Crodpfx Asvn Sa Telbeg Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20400 kg Oil tank capacity: 800 liters

Condition: used, Year of construction: 2006, We are offering this used Backservice Compact Powerlift, manufactured in 2006, for sale. Designation: Compact Powerlift Serial number: CDP 4904.5 Year of manufacture: 2006 Ideal for portioning and filling fresh cheese, meat salads, sauces, etc. Crjdpfx Aljzufidebeg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Csdpfox Eitbsx Alberg Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 50 - 100 AX injection molding machine Electric injection molding machine Year of production - 2011 Working hours 47799 Operator language: German, Romanian, Czech Closing unit - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Dimensions of the mounting plate (hxv): mm 510 X 460 - Distance between columns (hxv): mm 410 X 360 Injection unit - Screw diameter: mm 25 - Injection pressure: bar 2025 - Injection volume: cm3 49 - Injection weight for PS: g 45 Cjdsv Hxgqspfx Albjrg Dimensions and weight - Net weight with control cabinet: t 3.9 - Machine dimensions (length x width x height): m 4.13 x 1.6 x 1.8

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Codpfsx Sqi Hsx Albsrg Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)