Used Berg & Schmid Ubs Gr.1 for sale (79,701)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD Iajdpfxeuxfu Ne Abujr - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2003, Wood chip boiler Schmid UTSR 1600kW, output 1600kW, moving grate firing, year of manufacture 2003, max. safety temperature 110°C, incl. hydraulic feed, incl. ash removal, incl. control system. The system must be dismantled for removal. Not included: walking floor, chain conveyor, chimney. Iaedpfxsvyrwps Abuor

Condition: used, diameter / mm hollow / mm chuck width / mm weight / kg HES 400/115 power chuck from BERG with jaws Type: HES 400/115 Ijdpfx Ajytycqobusar

Condition: used, Year of construction: 2001, Format: 370 x 520 mm Iaedexxlxtepfx Abujr Equipment: DDS dampening Plusversion

Condition: new, weight / kg Iedpfx Aboymgbasujar taper MK / Berg Spanntechnik BERG 376.14917.000.0 Q1107 Hydraulic clamping head New/new. Price is per piece. 2 pieces available Typ: SPH20 d1: 85mm d2: 105mm d3: 125mm d4: 85mm Gewinde: 6xM8 l1: 54mm l2: 56mm FS: 20kN P: 80 bar

Condition: used, Year of construction: 1990, The Jagenberg 185-1, manufactured in 1990, is a machine with a format of 1850 mm, currently in stock and located in Germany. It is designed for working with corrugated board and features various shaft configurations (F/E/EE/EB/BE). The machine supports different gluing methods, including 3-point, 4-point, and special gluing. It has a minimum working width of 215 mm and a maximum of 1850 mm, with an insertion range from 150 mm to 1200 mm. After gluing, the working width ranges from 140 mm to 1000 mm. The machine also features motorized format adjustment and a folding base. The delivery terms are FCA. Format: 1850 mm Equipment: Iedpfsvfxpvjx Abujar Working width min/max 215 mm / 1850 mm Working width after gluing min / max 140 mm / 1000 mm Insertion min / max 150 mm / 1200 mm 3 point / 4 point / special binding F/E/EE/EB/BE corrugated / solid cardboard Straight line glue folding bottom Motorized format setting

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar Iaodou Nu Nkjpfx Abujr filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/020 -Length: 7.0 m -Transport dimensions: Ø 560 x 170 mm -Weight: 10 kg Iajdjx Einpepfx Abujr

Condition: used, 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg PM-QM46-1 Year 2005 - Serial-No. 965406 Bogenformat / Sheet size min. 140 mm × 89 mm - max. 340 x 460mm Druckgeschwindigekit / Printing Speed max. 10.000sh/h Dicke / Thickness 0.04 mm – 0.3 mm Dampening System DDS Autplate Plus Version Streifeneinleger - Strip feeder Mediprint STR 4.1 Iasdpfev Ak S Rjx Abuer Trockenbestäuber / Dry pollinators Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 68, Perforation tool W. Kroll Gartenberg 68-1 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Iasdoh Ax Drepfx Abusr On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2005, Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3.000 /-40/+130 Temp. Range: -40°C to +130°C Program Controller: Stange SE - 502 Line Voltage: 400 V Rated Current: 32 A Refrigerant: R 404 A / R 23 Year of Manufacture: 2005 Iasdpfsuuibkox Abusr External Dimensions: W 1600 x D 800 x H 2430 mm TK-16 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. - Straight line gluing - 3-point gluing, crash lock, lock bottom - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition Ijdpfx Abew H Rc Nsuoar

Condition: good (used), machine/vehicle number: 711 400 N, Heidelberg GTO 52-1 offset printing press, single-color, alcolor, machine number 711 400 N, + version, in good condition, available immediately. Iedpfxewfm D Hs Abuear If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Condition: used, Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor -Manufacturer: Schmid Fördertechnik, roller curve conveyor 90° with drive -Case: stainless steel Isdjtvb Eyjpfx Abujar -Rolls: Ø 55-85 x 500 mm -Speed: 15 m/min -Drive: SEW-Eurodrive, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2000/1200/H830 mm -Weight: 141 kg with pallet

Condition: good (used), Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sa-2 -Power: 5.5 kW -Speed: 2890 rpm Iajdpfswkr Rvsx Abujr -Shaft: Ø 38 x 65 mm -Design: B5 -Protection class: IP 54/55 -Number: 2x available -Price: per piece -Dimensions: 430/300/H250 mm -Weight: 36 kg

Condition: good (used), Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm Iodpfowktbpex Abuoar -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

Condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control, inverter driving control, driving control Ijdpfx Ajizugnebujar -Manufacturer: Zapi, inverter drive control from electric forklift Sichelschmidt M 1510 V -Type: SEM-1 -Mat no.: 7020 0442 FS5002 -Voltage: 48V -Dimensions: 210/150/H70 mm -Weight: 1 kg

Condition: used, Tires, solid rubber tires, forklift tires, complete wheel -Manufacturer: Bergougnan, solid rubber tire with rim -Tire size: 18x7x12 1/8 / 457/178-308 -Bolt circle: Ø 178 x 22 mm -Recess: perforated shaft cone Ø 125 - 130 m Ijdow U N Niopfx Abusar -Number: 2x tires available -Price: per piece -Dimensions: Ø 430 x 180 mm -Weight: 72 kg/piece

Condition: used, Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps -Berg: clamping technology chip motor type FSP 140 U Iaoded S Hqdspfx Abujr -Shaft: M22 x 1.5 -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Condition: new, Year of construction: 2025, Sharpening woodworking tools The PROFI chisel (lancing bag) and planing knife grinding machine! No cheap ASIA copy! The original! WOOD-TOOL-GRINDER WTG-1 - «Swiss Currently the absolute cheapest PROFI wood tool grinder on the market! For a precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder sharpen your tools like: «Chisels, plow blades, chisels, chisels» fast, simple, accurate and inexpensive ... Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Where conventionally wood is processed. - For example, in carpentry, carpentry, - carpentry, schools, trade schools, - Training centers / training workshops ... Iedpfxodt Ap Ae Abujar Your advantages - Very precise, stable and stable construction - Fast, in just 30 seconds you grind a perfect flashless edge - Extremely easy to use, also for apprentices and unskilled workers - Dry grinding principle, i. no problems with moisture (water / oil) - Stepless cutting angle adjustment - You buy fewer new tools, thus lower maintenance and fixed costs Construction of the wooden tool grinding machine «WTG-1» The WTG is powered by a powerful 500 watt motor. The carriage used is a dust-proof, high-precision, ball-bearing profiled rail guide, which is used a thousand times in machine tools, industrial robots and precision special purpose machines. Stepless grinding is achieved by means of an accurate and self-locking dovetail. The tool clamping is safe and stable via a parallel clamping system. Technical specifications Weight: 20 kg Connection: 230 volts Motor: 500 watts Speed: 3000 rpm Grindable tool width: 5 - 60 mm Cutting angle adjustment: 25 - 30 ° degrees stepless Main grinding wheel: special corundum Ø 100 mm Polishing wheel / buffing wheel: special type ROTAX Ø 150 mm I would recommend you the basic machine and the grinding double set. So you are well prepared. Your direct contact person: Sir Marc Brönnimann Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: new, Year of construction: 2025, Sharpening of woodworking tools The Profi Firmer ( piercing bag) and Planer knife grinding machine WOOD TOOL GRINDER WTG -1 - "Swiss quality" For an accurate and efficient work perfectly honed, razor-sharp cutting edge is a must. With our grinder to sharpen your tools " wood chisel (holly bag) , planer knives , chisels , chisel " , fast, easy , accurate and inexpensive ... Currently, the absolute cheapest PROFESSIONAL wooden tool grinder on the market! Made in Switzerland Swiss Quality = Where the WOOD TOOL GRINDER is " WTG -1" used? • Wherever conventional wood is processed. • For example, in carpentry , joinery , • Carpeting , schools, trade schools , • schools / training workshops ... Base machine price : EUR 2050.00 (ex works , excl 8.0 % VAT) You win and this several times ! If you regrind a wood chisel or a hand planer blades by hand or with an " older machine " experienced artisans need 5 min or more per tooth , if not even longer and get a good result ! With the WTG you need just about 30 seconds per tool . In no time you grind even a whole set of tools. And that, too, without having any special knowledge or grinding years of experience . So the machine can pay for itself relatively quickly. But above all, can be obtained every year , high , variable costs for tools and grinding work to a minimum . Once in possession of a WTG machine, you just have to work with perfectly cut tools , which has a positive impact among others on the quality and speed of operation. Iasdpeb Dt Ixjfx Abusr Go with the time ... go with BERGER technology GmbH. Your direct contact persons : Grinding Technology : Marc Broennimann Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: used, Year of construction: 2016, functionality: fully functional, Heating boiler for sale. Available for collection from February 2026. Rated thermal output: 150 kW Combustion thermal output: 45–150 kW Boiler water capacity: 370 liters Boiler class: 3 Maximum operating overpressure: 3.0 bar Maximum operating temperature: 90°C Isdpfxjx At Nbs Abuoar

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Iasdpfx Ajlrt Sajbusr Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg Iedpfsx Eipvjx Abuear

Condition: good (used), Year of construction: 1979, Packing aid for folder-gluer machines Japack 40-1 Iaedpfjw H N U Rex Abujr Box length: 80-535 mm Box width: 50-400 mm Standard, motorized curve on the right / back-up conveyor with vibrator, contactless proximity switches, laser counter, motorized height adjustment, packing pattern: 1-4 rows/layers, resulting in 16 possibilities. Overhaul 2025: cleaned, inspected, painted, new belts.