Used Atlanta Stretch Mytho - A for sale (68,233)

Condition: new, A-Drive Technology M644-1340-1208-06MPZ SN:2003004, unused in opened original packaging, 100% functional, scope of delivery as per photos Hedpfsi D Ewdex Ai Nonk

Condition: reconditioned (used), Universal tool milling machine Manufacturer: Harich (DECKEL) Model: A (FP 1) Refurbished with CE certification Geometric acceptance with inspection protocol With warranty Accessories: Hnodpfx Aiedvdc Is Nok - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored protective cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons - New documentation for machine and control cabinet - CE declaration of conformity

Condition: used, This listing is for a Raymond A Lamb E18.12 Mini Hotplate Hnjdpfoxzgxmex Ai Njk

Condition: used, This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide Hnodpfx Aexzhg Sei Nsk

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Hedsxzhtropfx Ai Nenk Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath

Condition: used, This listing is for a Raymond A Lamb E22 Slide Microwriter Hjdpfxexzhgro Ai Nonk

Condition: excellent (used), Year of construction: 2008, For sale are a fully functional and very well-maintained gas burner of the brand: 1. Weishaupt G30/2-A, 1800 kW with Dungs DN 65 gas train 2. Weishaupt WM G20/2-A, 1600 kW with gas train 1. Weishaupt WM G20/2-A - Output: 300 - 1800 kW - Connection pressure: 15 - 500 mbar - Model: ZM-LN - Year of manufacture: 2006 2. Weishaupt WM G20/2-A - Output: 250 - 1600 kW - Connection pressure: 15 - 500 mbar - Model: ZM-LN Hnedpfxswgkpij Ai Nek - Year of manufacture: 2008

Condition: good (used), Year of construction: 2001, The Fladder 300/GYRO is a machine designed for processing flat surfaces (e.g., sheets, aluminum parts, steel components, or plastics). Main applications: - Deburring (removal of sharp edges), - Cleaning surfaces after laser, plasma, or punching processes, - Edge rounding, - Surface preparation for painting/coating, - Removal of rust, scale, and residual oxides. Technical specifications: Model: Fladder 300/GYRO-1300 VAC Working width: 1300 mm Power supply: 3 × 400 V, 50 Hz Current consumption: 63 A Protection class: IP54 Motors: independent drives for working units and conveyor belt Conveyor belt feed speed: adjustable Hnedpjw Uabpofx Ai Nek GYRO system: orbital-rotational working heads (uniform deburring and surface finishing) Equipment: conveyor belt with dust extraction (VAC), control panel, emergency STOP button Year of manufacture: 2001 Machine in good technical condition Complete, ready for operation On-site inspection possible

Condition: good (used), Year of construction: 1995, Model: Rotomat 180 Manufacturer: Egon Wutzke, Zell a. A., Germany Machine type: Bürst-Entgratemaschine (deburring and brushing machine) Article number: 609 101-04 Serial number: 1071 Year of manufacture: 1995 Key components: - Main switch (Hauptschalter) – red knob 0/1 Hnodpfx Aisw Uabie Nok - Fault indicator (Störung) – error warning light - Power indicator (Spannung) – voltage control lamp Brush spindle speeds: - I: 800 rpm - II: 1,600 rpm Working width: approx. 180 mm (hence the “180” model designation) Type of process: Brush deburring (for metal, aluminium, steel, plastics) Power supply: 400 V / 50 Hz (three-phase) Motor power: approx. 2.2 – 3.0 kW (depending on version) Speed settings: 2-stage (800 and 1,600 rpm) Dust extraction connection: Yes (extraction nozzle visible at rear) Safety features: Emergency stop, mechanical interlocks, fault signalling 🔹 Typical applications - Removal of sharp edges after laser cutting, stamping, or milling - Processing of small and medium metal parts - Surface preparation prior to painting, galvanising, or welding For sale: EWU Rotomat 180 Deburring Machine Offering for sale a brush deburring machine EWU Entgrattechnik Rotomat 180, year of manufacture 1995, made by Egon Wutzke (Germany). The machine is fully functional, used, newly serviced, and ready for operation. Technical data: • Model: Rotomat 180 • Manufacturer: Egon Wutzke / EWU Entgrattechnik • Year of manufacture: 1995 • Serial number: 1071 • Motor power: approx. 2.2 kW • Power supply: 400 V / 50 Hz (three-phase) • Spindle speeds: 800 / 1,600 rpm (2 ranges) • Maximum part size: Ø 180 mm / square up to 127 mm • Dimensions: approx. 950 × 1125 × 1270 mm • Weight: approx. 350 kg • Hour counter: [enter actual reading – shown in photo: 4451 h] • Equipment: dust extraction nozzle included Applications: • Deburring and edge rounding of pipes, profiles, steel and aluminium parts • Edge processing after cutting, stamping or milling • Surface preparation prior to painting, galvanising, or welding Condition: • The machine is in good technical condition • Fully functional electrical systems and controls • Ready for work, on-site inspection possible

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, power: 30 kW (40.79 HP), Multi-blade crosscut saw / Splitting machine for parquet strips Manufacturer: A. Costa Model: Zefiro 1450 Machine from parquet production, previously used as a grooving machine. Professional splitting machine for parquet strips. In engineered parquet production lines, this machine is typically positioned directly after the press, so that the parquet slats coming out of the press are fed directly to the Zefiro grooving and milling machine to mill/saw channels in the plywood backing. These grooves on the underside ensure that the manufactured parquet strips are more flexible and resilient. As a result, the parquet is less prone to deformation, which usually occurs due to moisture. This significantly increases the quality of the parquet flooring. Technical data: Working width: 1400 mm Max. feed width: approx. 1650 mm Cutting height: approx. 30 mm Min. distance between saw blades: approx. 20 mm Feed speed adjustable, approx. 3 - 13 m/min Hnedpfx Aexrlb Iei Nok Main motor: 30 kW CE marking Saw dimensions approx. 2800 x 2400 x 1800 mm Saw weight approx. 2,650 kg Including 2 conveyor belts for the removal of the grooved parquet slats

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Hodpfxjncd Ecs Ai Njnk Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM Hodpfehqhw Iex Ai Nenk W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: used, functionality: fully functional, Vertical insulated stainless steel tank Exterior dimensions: Dia Ø 2850/3000 mm, total height 5500 mm. Vertical, insulated stainless steel tanks – 2 units. Capacity: 30,000 L Hjdpfx Asxp Hihji Nonk 50 mm insulation, completed with aluminium TRP plates. Conical bottom with 3" outlet. Conical top with ventilation. Manhole in lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Quality: AISI 316 (V4A).

Condition: good (used), A-100730-Horizontaltank 16m3 Horizontal tanks 16.000 L, Stainless Steel AISI 316, Dimension: Ø 2530 mm X H 2900 m L 3800 mm Hodpjiiyufjfx Ai Njnk Manhole at front Only 2 pieces identical to offer

Condition: good (used), functionality: fully functional, Item: AV-12266-AV12270-Vertical21800L Stainless steel Vertical Insulated Jacketed tank, Capacity 21,800 L Exterior dimensions: Dia Ø 2500/2600 mm Total H 6500 mm. Vertical isolated, stainless steel tanks with cooling jacket - 3 pcs. Manhole bottom. Hsdpfxov I Hbxe Ai Njnk AISI 316

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer Hedpfxsffc Tyo Ai Njnk 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: used, Year of construction: 2018, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Hjdsvhcplspfx Ai Nsnk Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines.

Condition: excellent (used), Year of construction: 1984 Hnedpfxeryn S Aj Ai Nek Pressing force: 10 t Total pressing area: 300 x 300 mm Stroke: 540 mm Dimensions W x D x H: approx. 900 x 500 x 2150 mm

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW Hedpfxewrw D Re Ai Njnk dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: good (used), 2 trolleys 1000x1000x2000 mm; overall dimensions 1500x2600x3500 mm; power supply 400 V; total power 60 kW; heating power 54 kW; motors 2x2,2 kW; new computer; Hsdpfx Ajd Sk N Aoi Njnk external smoke generator.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, planing height: 300 mm, planing width: 450 mm, overall weight: 5,300 kg, the machine in very good condition, original paint, maximum profile 450mm x 300mm Hsdpfx Aexk S S Rji Nenk

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Technical details: Basket diameter: 900 mm Loading Height: 450 mm Loading Capacity: 300 kg Tank capacity: 80 lt Pump pressure: 2,5 bar Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Hedponcfmvefx Ai Nsnk Packing size:1450x1080x1340 mm Packing weight: 300 kg Main dimensions: W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: fully functional, the Mettler Toledo analyzing equipment Excellence T7 with accessories has not been in operation since 2024 Hnjdpewhlctofx Ai Njk

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type Hnsdsb Rnv Sspfx Ai Nsk negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Hsdpfx Aot Ucpbsi Njnk Inquire by phone or email!