Used Andolina Unwinding Reels for sale (998)

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Bwjdpforwxz Rsx Albst Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side Bwodpfsycnf Sox Albjt

Condition: like new (used), Year of construction: 2013, type of input current: three-phase, Brand: POLYPACK POLY JUNIOR 2080TL shrink wrap tunnel year of production: 2013 Bsdpehv Sldofx Albjwt Automatic shrink wrapping machine with motorized conveyor. product dimensions max: 800x600x600mm product dimensions mini: 200x50x50 mm Power supply on the right Output approx. 7-10 cycles / minute Working height: 850 mm Energy: 30 KW / 380 V three-phase / Compressed air 5-7 bar Product sensor cell Motorized upper and lower coil unwinder Schneider display Schneider PLC Film reel: - 35-90 microns - maximum diameter 400 mm - maximum width 600 mm Tunnel size Ho 1500 x W 800 x Ma 600 mm stainless film welding width: 800 mm Stainless steel structure machine length:

Condition: excellent (used), Year of construction: 2023, Max. master reel width: 1000 - 1400 - 1600mm Max. master reel weight: Up to 3000kg Max. master reel diameter: 1000 to 1800mm Minimum standard slit: 20mm (other sizes on request) Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Automatic core positioning 6 motors Automatic web tension control through loading cells APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals Bwsdszhwgbopfx Albjt MATERIALS: PE, Aluminium, Papers, Laminates

Condition: good (used), Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg Bjdpfxjxyv Uhs Albowt -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm Bjdpfopwnf Nox Albewt -Weight: 312 kg

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder Bwodpfx Alsi Exp Eebot -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B Bsdpjitdikofx Albswt -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: excellent (used), strapping machine, strapping set, tensioning and sealing device, textile strapping set -Manufacturer: Vematec, textile strapping set 19 mm with tensioning device, unwinder, accessories -Steel reel: with 2x polyester tape width 19 x 1 mm Bwjdpfx Alovrdzwjbjt -Staples/reel tensioners: see photos -Transport dimensions: 560/480/H480 mm -Total weight: 32.4 kg

Year of construction: 2020, condition: good (used), Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft -Type: G890E -Drive shaft: Ø 40 x 80 mm -Mounting: Bolt circle Ø 220 x 11 mm Bjdpfx Ajyxmrdelbowt -Number: 8x winding shaft available -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; Bwjdpfx Aof Ar Exjlbst INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; - 500, 800 or 1000 l water tank;

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMGATE, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 52 Tandem Emboss Machine is "embossing ready" - including a unique embossing module. Various embossing patterns/rolls available. New, Manufactured 2024 Specifications: Max. production speed: 25 m/min (2121 B2 sheets/h) Max. output of the feed. head: 8000 sheets/h Min. sheet size: 20 × 20 cm Max. sheet size: 56 × 80 cm Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0), Max 1.4 mm (with overlap < 0) Max. paper pile height: 52 cm Thickness of laminating film: 24-50 µm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: Approx. 4 min Sheet overlap accuracy: ± 1 mm Machine dimensions (incl. delivery desk): 3.07 x 1.13 m Consumption of compressed air: 65 l/min Max. consumption of compressed air: 95 l/min Max. pressing force: 15 kN Max. consumption of electricity: 7 kW Machine weight: 820 kg Recommended machine capacity: 100 000 sheets/month Machine Characteristics Comes out of the well-known and proven concept of the Amiga laminator. Thanks to modular design, the embossing module is in fact “inserted” between the laminating unit and separator of standard Amiga. The solution, with two processing units in a row, makes it easy to switch from standard single side lamination to embossing, which creates a special pattern on the laminated surface. 7 standard patterns available. Special patterns on demand. First unit for lamination is always activated and works with IR heated cylinder. Second unit is activated only when embossing is needed. The pattern is created due to sheet preheating before the processing unit and high pressure of PUR roller pressed to the structured cylinder. The cooling of the embossing cylinder helps to "freeze" the pattern to the laminated substrate. Basic configuration Feeder: Komfi single action feeding head. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Additional separation adjustable blowers for reliable separation of sheets from the pile. Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwind air expansion shaft for 3″ reel core. Adjustable spread roll for perfect smoothing of difficult film before lamination roller. IR heating for laminating cylinder. Temperature sensor inside the cylinder for extremely precise regulation. Rubber coated pressure roller for laminating unit, PUR pressure roller for embossing unit. Embossing Unit: Sheet preheater in front of the embossing roller to activate surface before embossing occurs. Powerful pneumatic pressure system to ensure excellent laminating and embossing result. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Bwodsziavujpfx Albst Built-in perforator to enable sheet separation, placed behind pull rollers to avoid web brakes. Cam driven separation roller. Skewing wheel for fine adjustment of snapping to avoid film flagging. Adjustable speed of snapping roller for perfect separation of difficult jobs. Fixed delivery desk.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Bjdpozh S Ugsfx Albjwt Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: good (used), Year of construction: 2007, NILPETER FA-4 Servo-Driven UV Flexo Printing Press Year: 2007 Web width: 420 mm / 16.5” Number of colors: 8 flexo printing units Technology: Servo-driven UV flexo press Max. mechanical speed: approx. 175 m/min Application: Multi-substrate label and packaging production Condition: Used, offered “as is” Availability: Subject to prior sale Machine configuration: Unwind section: • Unwinder with reel lift • Web guide system Bwjdpfx Aley Tytkobet • Splice table • SDI web cleaner • Vetaphone corona treater Printing and web handling: • 8 x flexo printing units • Servo-driven press technology • Automatic registration system • Chill rollers with chiller • 8 x IST MBS 5 UV dryers • Delam/relam unit with web turn bars Additional converting/finishing equipment: • 2 x rail-mounted unwind/rewind units for cold foil or lamination • Back slit unit • Rotary die-cutting station • Waste matrix rewind • Product rewind with lay-on roller • BST web inspection camera

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Bjdpoxq A Hlefx Albjwt Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm Bwsdpfx Aju Tp N Dolbst plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control Bwodpfx Ajy Ufgrjlbet A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Year of construction: 2024, condition: like new (used), functionality: fully functional, We offer this like-new Jouanel DVS1000D double unwinding reel, manufactured in 2024. Maximum coil width: 1000 mm Maximum coil weight: 1200 kg Maximum coil outside diameter: 1000 mm Coil inside diameter: 285 to 540 mm Dimensions L × W × H: 1760 × 1540 × 1380 mm Net weight: 239 kg If you have any questions or require further information, please do not hesitate to send us a message or call us. Bedpfx Aljza Eblebjwt

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: Bwsdpfoiky H Sox Albst - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Thanks to its compact dimensions and quick mould change, it is the ideal solution for small delis and supermarkets. The machine can be fitted with the patented INFINITY modular J Pack mould or with customised moulds. Optionally also available with gas flushing. Features: - Mould change - Customisable mould - Automatic film unwinding - Acoustic end-of-cycle buzzer - Partial and total cycle counter Technical Specifications: - Dimensions: 295 mm x 450 mm x 550 mm Bodpfx Asl Eylaslbswt - Weight: 25 kg - Max. tray size: 260 mm x 195 mm x 155 mm - Max. reel width and diameter: L= 210 / Ø 200 mm - Feeding: Electric - Tray loading and handling: Manual + Electric - Mould: Infinity / Fixed, no die-cut - Cycles per minute: 3 - 8 - Custom digital welding programmes: 9 - Power supply: 220 V / 750 W

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Bsdpohx R Etsfx Albjwt Good condition - not electrically operational.

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Bjdpfxexuwans Albowt Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner Bwsdpfx Alov Tzhqsbet •

Year of construction: 1991, condition: used, functionality: fully functional, machine/vehicle number: L7-614-14H, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM ¼ FOLD NAPKINS. PRICE: PRINTING MACHINE Producer: Hobema Model: 14H Serial number: L7-614-14H Production date: 1991 EQUIPMENT 1. Double unwinder for reels up to: 1500 mm with lift Bwjdpfswnyatjx Albjt • intake for roll core R 70 or 76 mm • max roll weight 200 kg • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality • drive from the central engine • hardened and ground cylinders 3. Web Aligner No. AND • FIFO web aligner positioned in front of printing station 4. Flexographic Printing Press • one printing tower frame for max five (5) printing units • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 330 mm 2 • one central engine for all printers • motorized 360° radial register • ceramic coated anilox roller • one set mounting cylinders – for 330mm (Lunch) napkins formats • external air pumps to supply paint • lifting and dropping of ink trays • protection covers, safety switches 5. Strobe device for print control. 6. Infrared Drying Equipment • one drying infra-red cassette with temperature regulation • one fan for cooling the casette • automatic shut-off when the end of the material roll. 7. FIFO web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, round 330x330mm 9. Vertical folding frame with a cutting knife 10. ¼ Folding Head 11. Two-way product output and automatic transfer to packing machine 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 230 – 250 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S5 Max Power 120 KW. ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 30 KW.

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Available with or without a sealing station Arrangeble for in-line connection Quick, repeatable, and tool-free format change Bsdpfxeybcwtj Albswt Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.