Used Amada Punching Machine for sale (65,614)

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: 101705 CE, functionality: fully functional, total length: 2,290 mm, total width: 2,450 mm, total height: 1,970 mm, overall weight: 5,100 kg, Lift table punching machine; retractable bridge - Punching force 800 kN - Table dimensions 1600 x 800 mm - Weight 5100 kg - W x H x D approx. 2450 x 2290 x 1970 mm - Hydraulic oil approx. 125 l HLP 46 - Punching pad P178 NE, 10 mm thick - Special accessories: electrically adjustable support legs - Triggering via button or single-cycle safety light curtain - Technically inspected and fully overhauled - Condition as new Dwsdpfx Ajx Nvtrelbob - Colour RAL 7035 grey - Without hydraulic oil

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Dwjdszw I Hqjpfx Albjb ATTENTION!! This offer includes only the engine and transmission!

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Dedpoy Nnaksfx Albewb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer Djdpfoy Samuex Albjwb - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 Djdpowrkcyefx Albewb with -Foot switch

Condition: good (used), Year of construction: 1987, operating hours: 42,846 h, machine/vehicle number: P2440355, CNC turret punch press with 24 stations Control: FANUC 6M Operating hours: 42,846 h Dwedpfx Aljxqr Sqjbeb Spindle motor: 5.5 kW Capacity: 20 tons Number of stations: 24 Material thickness: 6.35 mm Hole size: 88.9 mm Sheet size WITHOUT REPOSITIONING: 1000 x 1000 mm WITH 1 REPOSITION: 2000 x 1000 mm Max. sheet weight: 50 kg Speed: 30 rpm Stroke rate: 200 strokes per minute Net weight: 8,500 kg Dimensions (L x W x H): 4,500 x 3,200 x 2,200 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Data transfer - USB interface - RJ45 network connection Dsdjzmgi Nopfx Albowb Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Extended punching technology: Multitool Thread forming

Condition: excellent (used), Year of construction: 2011, Model Amada HFE M2 103t x 3110 3m, 4 axis Press Brake Year 2011 Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 4535 mm Djdpjyym Hwjfx Albjwb Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Dwsdpfxszbqk Ue Albob Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: used, machine/vehicle number: 4131, Item No. Lg 34422 High-performance stamping press BRUDERER BSTA 60 H Dsdpfx Aeinzdljlbswb from current production. Stroke adjustment needs to be repaired. without soundproof cabin and without conveyor system. Feeder BBV 202/120

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Equipment: CE marking, emergency stop, foot remote control, HYDRAULIC PUNCHING MACHINE FICEP MOD. SP 40 Good used in excellent conditions cCE. Power exerted: Ton 40 Maximum punching diameter on thickness: mm 32 x 10. Recess: mm 510 Working height: mm 955 Stroke length (punch) from 0 up to mm 40 Net weight: kg 860 Dimensions: mm 1365 x 665 x 1700 (h) Dsdowm Emvspfx Albowb Motor power kw 4. Large hole device up to diameter 46mm included in the supply.

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Dwodpfx Ajwcd Spslbeb Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: excellent (used), functionality: fully functional, punching force: 110 t, Geka punching machine model Puma 110/E-500, punching power 110tm, hole capacity diameter 40 x20, neckline 500mm, in good condition and very equipped. Dwodpfx Aovdkprelbeb

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine Dsdpfx Ajzv Twxslbjwb - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: used, Year of construction: 1986, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 204 t, stroke length: 220 mm, table length: 4,000 mm, clearance between the columns: 3,400 mm, overall weight: 12,000 kg, We offer this used PROMECAM Amada STPC 204 200 40 160 press brake, manufactured in 1986. Dodpfxjy Tmlas Albswb Machine number: STPC 200 40 160 Maximum pressing force: 2,040 kN Maximum stroke: 220 mm Voltage: 380 V Frequency: 50 Hz Date of manufacture: 20.10.86 Bending length: 4 m Distance between uprights: 3.4 m Includes tooling! Machine weight: approx. 12 tons Equipped with CYBELEC DNC 7000 control A crane is available for loading. The machine is functional and still in use / can be tested while powered on. However, due to its age, we cannot offer any warranty. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Hours: 11,800 Djdpfxjzp Dwpj Albewb Location available upon request Images available upon request

Condition: excellent (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, sheet thickness (max.): 4 mm, overall weight: 11,000 kg, table width: 1,250 mm, table length: 2,500 mm, controller manufacturer: Bosch, controller model: Bosch, power: 12 kW (16.32 HP), warranty duration: 3 months, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, safety light barrier, We offer this TRUMPF TRUMATIC 500R machine in very good condition, a punching and nibbling machine manufactured in 2000. Dwodpoza Nigjfx Albsb These machines are virtually indestructible and highly reliable. The machine has 40,000 operating hours. A Black Box for connecting to a LAN network is included. For an additional fee, a Tru-Tops software license can be added. The machine is stored in a dry and heated hall in its transport position and is fully functional, having been replaced by a newer model. We can arrange for a TRUMPF technician to be available within the EU and provide any information about the machine in German. If you are interested, a TRUMPF technician who is familiar with the machine will communicate with you. The photos are for illustrative purposes only. If you have any questions or need further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1979, total height: 1,750 mm, total width: 800 mm, total length: 1,200 mm, sheet thickness steel (max.): 3 mm, working range: 960 mm, overall weight: 750 kg, power: 0.37 kW (0.50 HP), Copy nibbler PIONIER KNA 600, steel capacity 3 mm, circular nibbling up to Ø 1000 mm, throat depth 600 mm, throat height 90 mm, motor 0.3 kW, stroke 0-12 mm, dimensions 1400x800x1750 mm, weight 400 kg Dsdpfx Aljyq Sc Djbswb

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec Dodeyyc Dfepfx Albjwb stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ ?v=KcKjibwWAKI Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm Dsdpfx Alswxy Dgebjwb - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction Djdszv Sarjpfx Albjwb - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2014, operating hours: 5,722 h, functionality: fully functional, machine/vehicle number: 379, punching force: 28 t, sheet thickness steel (max.): 6 mm, working range: 2,080 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 9,200 kg, lifting height: 90 mm, input voltage: 400 V, repeat accuracy: 0.03 mm, For sale: a Boschert Compact 1000 Rotation, manufactured in 2014, serial number 379, located in Königsdorf/Bavaria (south of Munich). CNC punching/nibbling machine for sheet metal processing: – Punching force 28 t (280 kN) – Trumpf tool system (sizes 1–3, up to Ø 105 mm) – Rotating head: all tools can be rotated 360° continuously Dwedpfx Aozkviaslbeb – Boschert CNC 32050 control with TFT operating panel, DXF import – Working area 1060 × 2080 mm, repositioning for long sheets – Sheet metal thickness up to 6 mm steel Meter readings taken directly from the control panel (photo in the advertisement): – Machine running: 5,722 hours – Hydraulics running: only 1,285 hours – Stroke counter: 2.3 million strokes The machine has been used little and is currently operational – inspection with demonstration is possible on short notice after arranging an appointment. Video will be provided later. Tool inventory and documentation available upon request. Dismantling and loading will be carried out by the buyer or by arrangement. Payment must be made before collection. Sale as seen, excluding any warranty. Export possible. Quick and straightforward transaction – please include a callback number with your inquiry.

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Dsdpfeud Rhvsx Albswb Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: used, Automatic High Quality Grinding Automatic High Quality Grinding Machine Type : Other All punch operators know the importance of tool maintenance on part quality and tool life. The AMADA TOGU is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. Unmanned operation Dwodpfofuai Uox Albeb Simple operator control Quick, reliable grinding of all standard tooling Supplied with jigs for shear angle grinding Restores tooling to optimum condition resulting in high quality parts Enables regular regrinding to maximise tool life USED AMADA AUTOMATIC TOOL GRINDER MODEL TOGU-III MACHINE SPECIFICATIONS Model ……………. TOGU-III Max. Diameter Tool Size ……………. 6.30 Max. Grinding …………… .039” Main Axis Motor …………… 2 H.P. 2 P Main Axis Rotation Speed ………….. 3000R.P.M. (60Hz) Main Axis Travel …………… 9.45” Main Axis Feed Motor …………….. DC Servo Motor (0.05 H.P.) Main Axis Feed Speed-High ………… 23.6 I.P.M. Main Axis Feed Speed-Middle ………. 2.36 I.P.M. Main Axis Feed Speed-Low …………. 0.002 I.P.M. Table Motor ……………. 0.134 H.P. 4P Table Rotation Speed …………… 72 R.P.M. (60Hz) Cooling Water Pump Motor ………….. 0.08 H.P. 2P Cooling Water Pump Flow …………… 0.9 CFM (60 Hz) Machine Weight …………….. 1,058 lbs Power Supply …………….. AC220V 3 Phase 2.5 kVA (Transformer Used Outside 220v Area) Air Supply …………… 60 C.F.M. Grinding Wheel …………….. CBN 5.31 Benefits: Fast and Easy to Use Fully automated machine Unmanned grinding cycle Easy operation – load ᐳ inputᐳ start Programmable re-grind amount High Quality Finish Automatic feed of wheel prevents tool burn Automatic grinding wheel dress indication Excellent surface finish Safe Unique safety locking system ensures operator safety Visual operation/standby indication Coolant and Filtration System Automatic coolant application prevents tool burn High quality finish maintained by filtration of coolant liquid

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive Dsdpfx Aezv Txpslbjwb - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading