Used Aluminum Sawing Machine for sale (71,834)

Condition: used, Bernardo CSM2000 circular saw-milling machine, in good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kg Ljdpfox H Ufbex Ab Aehn Prices subject to change, errors and misprints excepted.

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Ljdpfx Aozf Agzeb Aehn Weight: approx. 1,000 kg

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Lhsdjxw N N Hspfx Ab Asn Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Lhjdsupy Spspfx Ab Ajn Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Lhedpfxjxw N Sbj Ab Ajn Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw Ljdpfx Ajd Ixn Reb Ajhn -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Lsdpfx Aozrpl Deb Ajhn Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: new, Year of construction: 2026, CORMAK HBS320 Metal Band Saw – Precision and Reliable Cutting The CORMAK HBS320 metal band saw is an efficient and professional solution for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal materials. Its robust construction, wide cutting angle adjustment range, and compatibility with material feeding equipment make it a versatile metal band saw for production and service applications. Main Advantages of the Machine - Cutting angles from -45° to +60° – enables mitre cutting in both directions without the need to reposition the material. - Powerful 1.5 kW motor – provides high power and stable operation, even when cutting hard materials. - Cast iron saw arm – resistant to vibrations and heavy loads, ensuring accuracy and long service life. - Precision blade guides – equipped with bearings and carbide inserts to extend blade life. - Safe operation – protective guards and safety microswitches protect the operator and stop the drive when necessary. - Cooling system with electric pump – improves cutting efficiency and facilitates chip removal. Construction and Technology The metal band saw features a welded steel frame and a stable base with an integrated coolant tray. The cast iron saw arm ensures the rigidity of the entire cutting system. Cutting is performed using a gravity-feed system controlled by oil flow through a hydraulic cylinder. The quick-clamping vice and movable bed allow efficient and secure material positioning. The machine offers two blade speeds: 44 and 88 m/min, as well as stepless adjustment of the saw arm feed rate. Cutting Precision and Efficiency Thanks to its robust blade guiding system, the metal band saw maintains high cutting accuracy, even during intensive operation. The cooling system, equipped with a separate coolant tank and pump, helps reduce cutting temperatures and minimise blade wear. Automatic drive shut-off after completion of the cutting cycle prevents excessive wear of the drive components. Applications The CORMAK HBS320 band saw for pipes and profiles is designed for cutting structural steel, stainless steel, tool steel, copper, aluminium, and plastics. It is ideal for metalworking workshops, toolrooms, steel structure fabrication companies, and small-batch or custom production facilities. Standard Equipment - Quick-clamping vice - Hydraulic cylinder with adjustable descent rate - Coolant pump with collection tray and chip drainage system - Two-speed blade drive - Safety microswitch system Optional Equipment - Roller table extension Technical Specifications CORMAK HBS320 Metal Cutting Band Saw Parameter Specification Max. cutting diameter (90°) Ø 260 mm Max. rectangular cutting capacity (90°) 320 x 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Lhjdpfx Aei D Dgwob Aen Saw arm descent adjustment Hydraulic cylinder Blade dimensions 2740 x 27 x 0.9 mm Blade speed 44 / 88 m/min Vice height 920 mm Overall dimensions 1400 x 880 x 1550 mm Weight 280 kg

Condition: new, Year of construction: 2026, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps - Mist lubrication system - 300 cm roller conveyor with length stop Ledpfxogg N Axo Ab Ajhn - Blow gun - Protective cover - Documentation - 400V

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Lsdjy Ni Ayspfx Ab Ajhn

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal cutting band saw is a high-performance semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulic technology make it an ideal solution for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all machine functions, significantly reducing operating time and improving work ergonomics. Main advantages of the machine Semi-automatic operation – hydraulic lifting and lowering of the saw arm and vice control via the control panel. Worm gear transmission with bronze components – ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min – allows adaptation to various materials and cutting conditions. Carbide blade guides with roller bearings – provide durability and highly accurate blade tracking. Quick-clamping vice – manually or hydraulically operated, with left/right positioning capability. Angular cutting from -45° to +60° – with precise angle reading on the scale. Durable cast iron body – guarantees cutting stability and long machine service life. Hydraulic arm lowering adjustment – allows precise control and setting of the return height. Construction and technology The BS530H model features a reinforced drive system and industrial hydraulic components, ensuring reliable operation even under intensive working conditions. The heavy-duty cast iron body reduces vibrations and provides smooth, consistent performance. The ergonomic control console allows all operations to be managed from a single location. The coolant system integrated into the machine base effectively removes heat and contaminants, protecting the blade from overheating and premature wear. Precision and work efficiency Thanks to stepless speed adjustment, manual or semi-automatic operating modes, and the use of a dial tension gauge for monitoring blade tension, the BS530H metal cutting band saw ensures repeatable results and high cutting quality even during long production runs. Work efficiency is further improved by the front material support roller and the arm locking system, which increases operator safety after completion of the cutting cycle. Applications The machine is designed for: industrial production plants, metalworking workshops, companies performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for serial production, steel fabrication, and preparing components for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Powered blade cleaning brush Lhjdpfx Abew U Svlj Asn Coolant system with pump Front material support roller Dial blade tension gauge CE declaration and technical documentation (DTR) Optional equipment Additional material guide rollers Semi-Automatic Metal Cutting Band Saw CORMAK BS530H Technical data Parameter Value Working height 965 mm Cutting speed 30–80 m/min Saw blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total motor power 3.0 kW Power supply 400 V Machine dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: excellent (used), Year of construction: 2020, Felder Machines Table saw K 740, year of manufacture 2019 Table saw F 700Z, year of manufacture 2020 Lhjdpfjzyn Aqsx Ab Ajn Table saw K 700, year of manufacture 2020

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Lhsdpfxeu R Sx Ee Ab Aen Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Lhodpfsudi Uzox Ab Aon Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Vertical bandsaw PEHAKA, type SM 4 Manufacturer's No. 27060, year of manufacture approx. 1980 Overhang: 380 mm Table size: 620 x 480 mm Cutting height: 250 mm Roller diameter: 400 mm Working height: 1120 mm Lhodpfx Aeiv A U Ejb Aen Saw blade length: min. 2900 - max. 3100 mm Saw blade speed: 22-125 m/min, infinitely variable Motor power: 0.6 / 0.75 kW Power connection: 380 Volts, 50 Hz - Infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds - Saw table tiltable +/- 15° - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - Base frame made of U-steel 100 x 50 mm, movable with a pallet truck Space requirement L x W x H: 1050 x 800 x 1950 mm Weight: 355 kg Good condition

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice Lhsdpfxexph E Rs Ab Aen - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. Lhodpfx Abeycqhco Aon The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: new, Year of construction: 2025, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T411592, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, saw blade diameter: 3,150 mm, cutting length (max.): 3,200 mm, Equipment: scorer, F25 basic configuration - Manual height and tilt adjustment of the saw blade from 0 to 46°, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm Ledpfewwuamex Ab Aohn - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package Type 4 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence Digit – X, 1,410 mm - Large extraction hood (PSV) - Scoring unit Basic with LED lighting

Condition: excellent (used), saw blade diameter: 400 mm, – 400 mm saw blade Lodowlwa Sepfx Ab Aehn – Double cut / double miter – 4 pneumatic collets – Hydrocheck – Mist lubrication system – Blow gun – Protective hood – 400 V

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Lhedpfx Abeu R Syie Aon Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Lhsdpfx Aow U Skvsb Asn Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: Lodpfxoyx S N Us Ab Aehn POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: excellent (used), Fully automatic band saw planing machine Lodpfxed Sr Sie Ab Aohn Oppliger Type PBS 860

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. Lodpfx Ajmrnk Ejb Ajhn The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: used, Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment. Lhodpfx Aboz A Ekbe Aon