Used Zoller Ch-2501 Projektor Und Durchlicht Für H4000 for sale (19,045)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). Dcjdpfx Alszw Apgjbel The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Dsdpfxezygbrs Albecl

Condition: new, functionality: fully functional, Aerial work platform, work basket with platform for forklift (like new) Width: 870mm Depth: 870mm Guardrail height: 1020mm / 1500mm / Total height of forklift protection mast: 2330mm Includes extension: 480mm with side access With forklift mounting distance: min: 550mm – max: 940mm Dcsdpfx Alezyu Tijbjl Forklift tine receiver: width max. 190mm x height 90mm Available in stock.

Condition: good (used), functionality: fully functional, mileage: 330,000 km, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: ABS, air conditioning, Used truck Mercedes-Benz Citan closed van, year 2004, manual transmission, total length of 'truck 4,300mm,total weight 1,950kg, payload 520kg, climate, ABS, Euro5 B, mirrors + electric windows, radio, Km 330,000, good state of 'use. Dcsdpfx Aljuiy Nasbsl INFO ENG: Used truck Mercedes-Benz Citan closed van truck, firt registration 2004, manual transmission, total length of the truck 4,300mm, total weight 1,950kg, payload 520kg, air conditioning, ABS, Euro5 B, electric mirrors + windows, radio, Km 330,000, good condition.

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! Dcsdpfezwk Ttex Albol If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Zoller Titan tool measuring machine: - Year of manufacture: 2019 Dcjdpfxjzd Acas Albel - Software: titan/pilot 3.0 - Max. tool length (Z-axis) = 550 mm - Max. tool diameter = 260 mm - Tool holder: SK40, KSK63, etc., as required

Condition: new, table length 1200 mm table width 800 mm weight 153 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Dcodpfjxabbajx Albel Working height between approx. 700 and 1,000 mm including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for both manual and robotic processing, used for polishing parts made of aluminum, steel, brass, and zinc die-cast. Technical data: Polishing disc: max. Ø 450 mm Dsdpfx Alsc Rfg Uebscl Spindle diameter: 35 mm Polishing disc width: max. 50 mm Dust extraction connection: Ø 100 mm Dimensions (L x W x H): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Connection power: 4 kW Height to polishing spindle adjustable to customer requirements Made in Germany Warranty: 12 months Optional: Extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control, 1 main switch.

Condition: used, machine/vehicle number: 379, empty load weight: 6,020 kg, maximum load weight: 25,880 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/1998, loading space volume: 24 m³, suspension: air, tire size: 445/65 r22,5, color: blue, Equipment: ABS, * Drum brake * Wheelbase 1,300 mm * Folding underride guard * SAF axles * Level compensation left/right * Platform Errors excepted Dcjdpfsmgb Ngjx Albsl

Condition: good (used), The scope of delivery includes: 198 used deep-web joists Material color: Sendzimir galvanized Total length: approx. 1,110 mm Suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Crossbeam support: approx. 50 mm Weight/piece: approx. 3.02 kg Dcsdpfxjlhp Tce Albsl Note: The unit price only applies to a minimum order quantity of 198 pieces (1 pallet).

Condition: ready for operation (used), Grundfos SPK8-5/3 A-W-A-AUUV exchange pump D3HNH0403P31126 SN: MK116551 with MG71B2-14FT85-C pump motor No. 85805103,used, good condition, 100% functional, scope of delivery according to photos Djdpfx Ajmq H R Solbocl

Condition: new, The scope of delivery includes: 01x stage support, new Manufacturer: SSI Schäfer design: corner connection / 90 suitable for CS Sigma profiles with a profile height of 300 mm type of screw connection: internal Material color: sendzimir galvanized Technical data of the stage support: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Dcodpfxemv Dyze Albsl

Condition: used, mileage: 35,181 km, power: 124 kW (168.59 HP), first registration: 03/1990, fuel type: diesel, empty load weight: 7,590 kg, maximum load weight: 4,550 kg, overall weight: 12,140 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, color: green, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 3, loading space length: 4,900 mm, loading space width: 2,340 mm, loading space height: 1,950 mm, Equipment: all wheel drive, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, Kz. Haus, double bench seat, switch 6, differential lock, storage box, leaf suspension, tarpaulin and bows, lashing eyes, aluminum side bumpers, pendulum flaps Wheelbase: 3600 mm Body: Platform body with tarpaulin, loading height approx. 1450 mm, kitchen equipment. Spare wheel available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcedpfx Ajvhlhwolbjl - .

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: Meter reading - Borehole diameter: max. 385 mm - Maximum torque: 2500 kN - Tensile force: 96 kN - Compressive force: 65 kN - Max. drilling length: 250 m - Power: 90 kW - Drilling rods and bits included - Complete equipment with separate motor, hydraulic unit and tank for drilling fluid - Motor: Perkins 119 kW / 162 hp This offer is subject to change; errors and omissions excepted. Only the specific agreements in the order confirmation or purchase agreement are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC). These can be accessed at any time on our website or can be requested from us. The place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Dodpohd I S Uefx Albscl Further information: Intended use: Construction

Year of construction: 1992, condition: not inspected (used), Bagging machine and net clipper, double unit, manufacturer Strapack, for apples, potatoes, 1-5 kg capacity. Dcodjhh Idrspfx Albel The machine is in very good condition and was in operation for only about 10 years. The machine has 4 bagging stations, which allows for a throughput of approximately 15-20 2 kg bags per minute. The machine is complete with all accessories and ready for operation. The machine has been fully overhauled; price upon request. I am also selling SPARE PARTS for EW20, EW10 and net clippers UC20. If interested, please contact:

Condition: like new (used), Year of construction: 2003, Type VSM400-00185 Voltage 230 V Tolerance -10% - +6% Frequency 50/60 Hz Performance < 1000 VA DIN EN 61010-1 Standard Dcedpfx Aljixqwqjbol Pneumatic 4 - 6 bar Weight 900 N Year 2003 Good working condition. Please check out our other listings as well.

Condition: good (used), - Unused - Maximum working width 700 mm - 2 rollers 1 x top 1 x bottom - Simultaneous wrapping of top and bottom side for many materials, glass, mirror splinter protection film, - metal, other smooth sheets Dcsdpfxorhib Io Albel - Roller conveyors available for supply and removal - Price on request

Year of construction: 2024, condition: new, functionality: fully functional, Technical description: The system is designed for weighing standard cars. The loading trolley (200 or 300 litres) is pushed into the system. The free stroke and the weighing process are triggered by a button. The free stroke is carried out via motor drive. In connection with the bending rod weighing cell and the weighing terminal, the weight can be read in the display and passed on to the existing DMS or ERP system. If necessary, the recipe scale can be equipped with casters as a mobile version. The system can be equipped with all common weighing terminals. • Stainless steel base frame in hygienic design • 1 drive unit • Button • Shafts, bearings Dcodpfx Asttv Dfslbsl • Height-adjustable feet (alternatively mobile version) • CEE plug

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 100 mm for shelf spacing: approx. 200 mm Dimensions of head plates: 128 x 90 mm Profile dimensions: C 46 x 23 mm Weight: approx. 1.200 kg | per piece General information about the item: Dcedpfx Aei Hph Sslbsl This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm Dcedpfxsb Ix Nie Albol -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm -Weight: 84 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Voltage: 380-415 V 690 W -Max. flow rate: 2 m³/h -max. H: 36/46 m -Max. pressure: 6 bar -Maximum temperature: 90 °C -Price: per piece Dodpfxjd Tk Sqe Albecl -Quantity: 2 pieces -Dimensions: 400/143/H203 mm -Weight: 12.4 kg

Condition: used, Chimney, exhaust pipe, chimney stainless steel pipe Djdjd N Ddtspfx Albscl -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg

Year of construction: 2024, condition: as good as new (ex-display), Hydraulic circular bending machine with variable axes, HRB 3V, by Durma. Technical specifications: Bending size: 3100 mm Bending capacity Ødx1.5: 51 mm Bending capacity Ødx5: 60 mm Edge bending capacity Ødx1.5: 39 mm Edge bending capacity Ødx5: 35 mm Upper roller: 520 mm Lower roller: Side roller: 470 mm Max. roller spacing: Length: 6600 mm Width: 2250 mm Height: 2670 mm Working height: 1920 mm Weight: 40500 kg Motor power: 45 kW + 18.5 Dcodpfod E Ib Iox Albel Min. additional upper roller diameter: Oil tank capacity: 1000 liters Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) Dsdpfeqt Dmyjx Albecl - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, The conveyor belt TYPE L is used to feed or remove products and waste of all kinds in vegetable processing and transportation. Djdpforckn Rox Albecl ProdMa configures the conveyor belt according to the customer's requirements! The ALPHA 30 AA BLUE belt, equipped with guide rails and dividers, is ideal for transporting various foodstuffs and has been verified for the food industry.