Used Wmw Part Header for sale (15,448)

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine-horizontal -Manufacturer: WMW, counter bearing from milling machine -Dimensions: see drawing in the photos Guodpfx Aoxfhvbengsh -Dimensions: 295/76/H125 mm -Weight: 6.5 kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Gjdpeyvt H Ajfx Angjuh Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Gsdpoy Ra D Defx Angsuh Weight 47 kg Good condition

Condition: good (used), functionality: fully functional, 1 x Thread drilling machine WMW GI4/1 with coolant system Gusdpfx Anozk I Alsgsh The machine can be inspected while it is powered on.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. Guodpfszh Dtzox Angeh The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: ready for operation (used), Bench-mounted drill press, MK 5, with quill feed, drilling unit with electrically adjustable feed. Guodjzhxikepfx Angeh New electrical system. Equipped with a new brake motor.

Condition: used, Year of construction: 2026, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Key Features of the MP160 Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Machine Construction The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Gujdpfxsz Rwgxs Angeh Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg ATTENTION!!! Customer return: the machine is new and complete, but the housing is damaged. No warranty or returns!

Condition: used, D+P Dosing and Testing Technology 05-755-011, used industrial spare part Used industrial spare part from Dosing and Testing Technology GmbH. Guodsz N Hgxopfx Angjh Manufacturer: Dosing and Testing Technology GmbH Part number: 05-755-011 Condition: Used Quantity: 3

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V 50Hz 1.1A 0.37kW Pneumatic connection values: Compressed air supply line min. 6 bar / max. 10 bar Performance data: Godpfx Aen Nyt Hongjuh Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm usable height in the unit 800 mm loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm empty weight approx. 1320 kg

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Some of the technical specifications on the nameplate are damaged and not completely clearly legible. Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Repair of existing vibration testing systems Supply of replacement and assembly components Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No warranty for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. Gusdpfxjz Iqh Ae Angjh We are happy to answer any further questions by telephone.

Year of construction: 2013, condition: used, Parts cleaning system Manufacturer: Render Type: W 92 AM HD WT Year of manufacture: 2013 Data, washing chamber: Basket diameter: 900 mm Usable internal height: 520 mm Load capacity: 200 kg Pump performance: Flow rate: 240 liters/min. Pressure: 3 bar Washing tank capacity: 130 liters Heating power: Washing tank: 8 kW Drying: 4 kW Washing: 65 °C Drying: 130 °C Safety temperature limiter: yes Gsdpoz R Tp Dofx Angsuh External dimensions WxDxH (lid open) / Weight Cleaning system: 1,500 x 1,420 x 1,780 (2,300) mm / 390 kg Trolley: 950 x 1,100 x 1,220 mm / 80 kg 141026ä

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Gjdezdnnuepfx Angouh Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Gjdpjyba Rwefx Angjuh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Guodpfxjxxvqae Angjh

Condition: used, Sheet width: 2500 mm. Plate thickness: 10 mm. Distance between columns: 2700 mm. Throat: 400 mm. Total power requirement: 20 kW. Gedpfxjykl I Hs Angsuh Weight of the machine: Approximately 10,500 kg. Dimensions: Approximately 3800 x 2200 x 2000 mm. Control type: Typically conventional/manual control.

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm Guodpfx Aju A I Eljngeh gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: used, pressure 10 t stroke 400 mm Gusdped R Szuefx Angeh feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: like new (used), Year of construction: 2025, functionality: limited functionality, spindle motor power: 60 W, turning length: 9,000 mm, turning diameter over cross slide: 1,400 mm, spindle speed (max.): 160 rpm, turning diameter: 1,600 mm, overall weight: 35,500 kg, rotational speed (max.): 160 rpm, rotational speed (min.): 1 rpm, total width: 2,000 mm, total length: 12,000 mm, working length: 10,000 mm, workpiece weight (max.): 16,000 kg, turning diameter over bed slide: 1,600 mm, power: 60 kW (81.58 HP), warranty duration: 12 months, Machine in like-new condition with CNC, undergoing retrofit. Built originally in 1990, has few working hours due to the factory closure. Fully modernized equipment: electric, electronic, hydraulic, cable, portable chains; new CNC(2025 Edition). Mechanically in like-new condition, fully inspectable. Partially dismantled due to space constraints, partially in operation until installation is completed. Can be inspected at any time, suitable for heavy industrial use. Gujdpfx Aoygk I Dengjh For more technical details, please send request. Price: quote on request. Delivery/installation: transportation options and installation quote available at request. Testing on delivery: available Warranty: 1 year mechanical, electric, hydraulic, 2 year CNC equipment.

Condition: ready for operation (used), functionality: fully functional, Gang drilling machine with 4 units, gear transmission, and feed. One unit equipped with a thread cutting device. Tool holder MK 4. Gujdpfx Ajx S U Uysngoh

Condition: used, functionality: fully functional, WMW Ruhla FUW 315 Milling Machine + Willy Vogel Pump. Speed range [rpm]: 56 - 2800 Traverse paths [X / Y / Z mm]: 500 / 400 / 33 Equipment / Accessories: Universal table can be rotated and tilted Guodpjv Sfausfx Angsh Good working condition. Please check out our other listings as well.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. Gjdpfx Asv S Dihongsuh If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Guedpfjwndnuox Angsh Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Technical data: Gear diameter: 300 mm Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Gjdpsxz Eg Ajfx Angouh Machine weight approx.: 11,000 kg *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Gujdpfjx Acpdex Angeh Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Gjdpfxey D A Nio Angjuh