Used Wmw Hoist Traverse for sale (5,222)

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Ksdpfx Absvy E A Sszsnb

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Knodjy Hk T Iopfx Abzeb

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Knjdjzulg Nopfx Abzeb

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Knjdezukufepfx Abzob

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Knsdpfx Aezukt Iebzeb

Condition: used, Recently arrived Knedpsygm Hvofx Abzjb WMW UPW 25

Condition: used, Recently arrived Ksdpfx Abjygm Igjzsnb WMW UPW 25

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased diameter and extended, hydraulic transverse movement! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau, and put into operation in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Diameter of workpiece protection ring max.: 800 mm Diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of internal grinding device on the table: max. 545 mm Transverse movement of workpiece spindle stock: max. 650 mm Swiveling of workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Transverse adjustment: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Dimensions & Weight Machine: 4100 x 2200 x 2500 mm Europallet with accessories Coolant tank: 1700 x 800 x 750 mm on Europallet Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixators or machine feet Various grinding wheels Diamond dresser Large grinding plate Internal and surface grinding device Halogen machine lamp Knodpfszqcvtox Abzob Machine documentation

Condition: excellent (used), Year of construction: 1978, Gear hobbing machine WMW MODUL ZFWZ 2000/3 Ksdozt Iu Tepfx Abzsnb Max. diameter with tailstock: 1450mm Max. diameter without tailstock: 2100mm Max. module: 30

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 500 mm, Floor boring machine WMW Union BFP 130/5 X-axis: 8300mm Y-axis: 2500mm Z-axis: 500mm W-axis: 900mm Spindle diameter: 130mm Spindle taper: ISO 50 Rotary table: 2000x1800 Kjdpfx Abszt Iqbozenb 2 x floor plates: 3500x1750 Year of manufacture: 1978 Milling head Tailstock DRO Heidenhain Spindle stabilizer Boring bar Many accessories ✅ Excellent working condition Total weight: 53 tones

Condition: ready for operation (used), WMW Column Drilling Machine IIK 20 -Drilling capacity: 20 mm -Spindle speeds: 95 / 150 / 190 / 300 / 380 / 600 / 760 / 1200 rpm -Number of speeds: 8 -Gear shifting via 2 shift levers (A/B) -Manual feed -Right/left rotation -Coolant system -Machine light -Height-adjustable and swiveling drilling table with T-slots -Solid cast iron construction Knsdpfsztfdfjx Abzob -Three-phase motor Dimensions: L x W x H 0.9 x 0.8 x 1.7 meters / Weight 420 kg Errors and omissions excepted.

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 650 mm Knsdpozmy Tuefx Abzob z-travel 650 mm Control Siemens 840 D weight of the machine ca. 12 t

Condition: good (used), Manufacturer: WMW VEB Knodpfjik Hcuox Abzjb Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Table size: 200x630mm

Condition: used, Type BF 63 Spindle mount: 4MT Spindle diameter: 63 mm Knodpfxewrpy Re Abzob Spindle speed: 8–1400 rpm Table size: 900 x 710 mm Drilling travel: 560 mm Table load capacity: 2000 kg Rotary table: 360 degrees

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Knsdpjx U Ectefx Abzeb Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, Kjdpov Hckgsfx Abzjnb - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Technical specifications: - Maximum press force 25 t - Maximum ram stroke 500 mm - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm Kjdpfxewd Nybe Abzsnb - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Knjdpfxjvxg Ruo Abzob Technical data: - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Technical data: - Table size approx. 630 x 340 mm - Working range of the axes Kodet Dxwgspfx Abzjnb - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable - Horizontal spindle counter holder - Machine vice

Condition: good (used), Offer 26013 Technical data: - Length approx. 1500 mm - Width approx. 1000 mm - Thickness of top plate approx. 50 mm - Plate thickness incl. ribbing approx. 200 mm - Table height approx. 870 / 900 mm Knedpfxjyi Ahns Abzsb - Table frame/base - Total weight approx. 550 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm Knjdpfx Abjrwl Nnozeb - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: Kodpfx Aborwmbgjzjnb - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm Slider: 450 x 280 mm Overhang: 250 mm Slider stroke: 16 to 125 mm Sheet thickness, continuous stroke: 3.2 mm Max. distance between table and slider: 417 mm Die opening: 280 x 250 mm Slider adjustment downwards: 70 mm Stroke rate: 80/min Power consumption: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1,500 x 1,600 x 2,700 mm Kjdpfoh N S Sdjx Abzonb

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m Knsdpozmapiofx Abzjb

Condition: used, Technical details: Kodpfjw Smukox Abzsnb pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *