Used Wittmann Mtc Basic-C90 F27 for sale (2,075)

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment Gedpfx Ajxw Tg Nemrjiw # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: new, Year of construction: 2026, CNC-controlled frame gluing press for gluing all types of frame constructions with dowel joints, mortise and tenon joints, and 45° miter joints. Manual centering of the left press plates, hydraulic centering of the right press plates, and hydraulic movement of the upper press beam. Maximum pressing area: 3,000 x 2,000 mm Two vertical press cylinders – pressing force per cylinder: 7.4 tons Two horizontal press cylinders, stroke: 150 mm – pressing force per cylinder: 2 tons. Maximum profile depth: 130 mm. Positioning of the two right horizontal press plates by hydraulic cylinders. Positioning of the upper press beam by hydraulic cylinders. Technical data: Gsdpfozhi Nbex Amrjiw Weight: 1,300 kg Drive power: 1.5 kW Dimensions: 3.8 x 1.2 x H 2.4 m - Control of the hydraulic movements digitally via the touch screen using softkey buttons - Programmable pressing programs – for pressing pressure and pressing time, automatic program-controlled opening of the press cylinders. Operator safety: Automatic locking of the upper press beam in the event of sudden pressure loss or when the machine is switched off.

Year of construction: 2020, condition: ready for operation (used), overall weight: 6,200 kg, pressing force: 10 t, Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details. • Stroke: 270 mm • Motor power: 11 kW • Voltage: 400 V / 3 phases • Oil tank capacity: 150 liters • Backgauge (X-axis): 650 mm Gjdpfxeyr Hl As Amroiw • R-axis travel: 200 mm Technical Specification Bending Length 2600 mm

Condition: new, functionality: fully functional, color: orange, operation weight: 2,300 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, HITACHI 23U-6 MTC with an operating weight of approximately 2,360 kg and a FULLY HYDRAULIC 360° OILQUICK OQR30 quick-change system - Base unit 23U-6 MTC - Cab and blade - 230 mm rubber tracks - 970 mm boom - Monoblock boom, laterally adjustable - Leak oil line - Automatic release for hammer/grapple - Hammer/shears and grapple hydraulics > all operated via the joysticks - IFM monitor for switching the auxiliary circuit Attachments: Rotator OILQUICK OQR30-R02 Demolition and sorting grapple, 300 mm cutting width Rigid trenching bucket, 1,200 mm cutting width Gjdpozg E H Hjfx Amroiw Grading bucket, 800 mm cutting width Clamshell – deep excavation grapple, 400 mm cutting width Manufacturer's warranty: 60 months or 3,000 operating hours, whichever comes first, in accordance with the manufacturer's guidelines. All wear parts are excluded. Inspection possible at any time. Financing and leasing available upon request.

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 160 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1100 X 7270 [mm] - Machine height : 1950 [mm] - Machine weight : 3000 [kg] MACHINE HOURS - Number of hours under power : 22834 [h] EQUIPMENT - CNC : Fanuc PNS DECO - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece Gedpfx Amsuhaz Tjroiw - Coolant tank - Bar loader : ROBOBAR SSF

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Gedpszghf Ejfx Amrjiw

Condition: new, New Siemens Basic Panel. The original packaging was only opened for the purpose of taking photographs. Manufacturer: Siemens Product series: SIMATIC HMI Type: KTP600 Basic Color DP Article number: 6AV6647-0AC11-3AX0 Device type: Basic Panel Display size: 5.7 inches Display type: TFT color display Resolution: 320 × 240 pixels Operation: Buttons and touchscreen Interface: PROFIBUS DP Degree of protection (front): IP65 Supply voltage: 24 V DC Gisdpfezcgzlsx Amrjw Programming software: WinCC flexible Compact, Standard and Advanced

Year of construction: 2015, condition: used, functionality: fully functional, We are offering this used ILPRA Basic V/G packaging machine, year 2015. Machine series: Foodpack Model: Basic V/G Serial number: FP 9774 Year: 2015 Voltage: 230 V If you have any questions or require further information, please feel free to send us a message or call us. Gsdpjy Id Tdjfx Amreiw

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine is under power and can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg Gijdpfx Amswu Nw Uerew EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.10 E -Class: 8502 -Price: per piece -Quantity: 23 pieces -Dimensions: 88/49/H75 mm Gedpfx Amed Sp I Aoroiw -Weight: 0.4 kg/piece

Condition: ready for operation (used), A Nagel + Hermann transfer and placement machine for transfer motifs (rhinestone, hotfix or similar) is available. Colors: unlimited, shapes: unlimited, production capacity: 5000elements/h, max. motif dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 820mm/650mm/650mm, weight: approx. 120kg. Including PC notebook, CAD software, 4x conveyor plates, 2x mounting plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Godpfx Amszdul Torsiw

Condition: new, Year of construction: 2026, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our pallet wrapper "Basic" is a semi-automatic stretch wrapper from Eurapa production, which guarantees absolutely consistent results due to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your requirements and saved in the programs. The programs also allow you to set how fast the film carriage and turntable run. Head and foot windings can also be saved for each program. In this way, you can store individual programs for each wrapping pattern to achieve perfect wrapping results every time. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg. Our Basic pallet wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course, as are adjustable head and foot wraps. If the wrapper needs to be used at a different location in the meantime, it can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you want a good and affordable pallet wrapper that can be adapted to your needs. Gisdpfxozaamco Amrjw About us: Business is done between people - we are convinced of that! A supplier delivers the ordered goods - a partner can do more: he helps you to find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2010, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, total width: 2,600 mm, total height: 3,850 mm, Equipment: ABS, * Tridec * Tail lift * Lift axle * Frigoblock HK 25 cooling unit * EuroScan Gedoma E Rvjpfx Amrsiw ----Internal vehicle number: 7770----Subject to errors and prior sale.

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2010, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, total width: 2,600 mm, total height: 3,850 mm, Equipment: ABS, * Tridec * Tail lift * Lift axle * Frigoblock HK 25 refrigeration unit * EuroScan ----Internal vehicle number: 7707----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp Godpfx Amjllr H Roreiw

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2010, total width: 2,600 mm, total height: 3,850 mm, Equipment: ABS, * Tridec Godpfx Aollr Najmroiw * Tail lift * Lift axle * Frigoblock HK 25 refrigeration unit * EuroScan ----Internal vehicle number: 7693----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2010, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, total width: 2,600 mm, total height: 3,850 mm, Equipment: ABS, * Tridec Gedpfx Aenfxhtemrsiw * Tail lift * Lift axle * Frigoblock HK 25 refrigeration unit * EuroScan ----Internal vehicle number: 7730----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Giedpeyhi Huefx Amrew Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2292.56 € 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Gjdpfsy Hf Rbex Amrsiw Art. - No. 217.400 with drill head height adjustment OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Gijdpfx Amoyfvg Ajrow Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2012, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, total width: 2,600 mm, total height: 3,850 mm, Equipment: ABS, * Tridec * Tail lift * Lift axle * EuroScan ----Internal vehicle number: 7799----Errors and prior sale excepted. WhatsApp support available! Godpoma Hazjfx Amroiw If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 13,5 kg span width: 208 mm Gedpfxovc Dv Ae Amrsiw *

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 400-223, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, mount diameter: 40 mm, table length: 2,500 mm, table width: 1,250 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 30,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, tool diameter: 20 mm, number of slots in tool magazine: 30, We offer this used MB-Portatec GmbH basic IIS Portatec basic II.S portal milling machine, manufactured in 2011. Manufacturer: MB - PORTATEC GmbH Type: basic II.S Serial number: 400-223 Year of manufacture: 2011 -Application: Processing of aluminum and plastics from sheets up to 2500mm. Gedpfx Amoy U R Syjroiw -Optional extra: Vertical clamping system. -Accessories: Vacuum pump and extraction system with pre-separator. -MMS system -Programmable vacuum fields If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Gijdpfx Amey R U Aberjw Overall dimensions: see attached sheet Weight kg 3500

Condition: new, Column drilling machine Manufacturer: MAXION Model: UNIMAX 4 Basic Condition: New machine Spindle speed (continuously variable): Range A: 120 - 2,500 rpm Range B: 60 - 1,250 rpm Normal drilling capacity: 40 mm Standard features: - Continuously variable drilling feed - Thread cutting device Godpfx Amoci Su Dsrjiw - Continuously variable speed control - Handle cross control - Digital display for speed, feed, and drilling depth - Drill breakage function - Operating manual with the following options: - Free cutting device

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor Gsdsy Nnnnepfx Amroiw - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”