Used Wiemers R1450 for sale (182)

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hnsdsurk Exjpfx Agtjt Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Year of construction: 1972, condition: used, Max. pulling force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Hnsdpfjcdtnhex Agtjt Throat depth: 470 mm Distance between die positions: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Year of construction: 1961, condition: used, General / technical data: Vertical duplex external broaching machine with two tables Hnodpfxslwu Hrj Agtet Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 weight: approx. 6.500kg tractive force: 10t clearing speeds: 1 - 11m/min return speeds: 7 - 25m/min maximum stroke: per machine unit 1250mm clamping area: 500 x 500mm passage width: 380mm power supply: 380 Volt / 50 Hz Remark: The machine is under power in our warehouse and can be inspected.

Condition: used, overall weight: 955 kg, total length: 2,150 mm, total width: 750 mm, total height: 1,700 mm, volume flow: 4,000 m³/h, PU 100 Length/Width/Height: 2.15m x 0.75m x 1.70m Weight: 955kg RPM: 1450 Head: 30m N/PS/Kw: n/a Flow Rate: 4000L/min Year of manufacture: n/a Hnedpfxoxvrafj Agtjt We have many other centrifugal pumps in stock. Feel free to contact us!

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, total length: 2,600 mm, total width: 600 mm, total height: 1,300 mm, motor manufacturer: Stöber Antriebstechnik, Equipment: type plate available, -KOM 3172- Offered here is a hinged belt conveyor from Frasch GmbH&Co. KG. The conveyor belt has breakout areas on the hinged belt, which can be seen in the photos. The functionality has been tested. This hinged belt conveyor was used for transporting plastic components. Hodpfx Agox Ifqdotjnt Type: FGA LU: 1900/LA: 1100xW:300 Power: 0.37 kW Year of manufacture: 2016 Total length: approx. 2600 mm Total height: approx. 1300 mm Total depth: approx. 600 mm Usable belt width: approx. 265 mm Spacing between carriers: approx. 490 mm

Condition: used, total length: 2,100 mm, total height: 1,500 mm, total width: 650 mm, conveyor belt width: 620 mm, ejection height: 1,000 mm, -KOM 1607- We are offering you here a scraper belt conveyor from May – Fran GMBH Essen. Dimensions can be found in the attached sketch. Hnsdpfxsyvfi Is Agtjt The machine can be inspected and tested under power at our warehouse. We offer several chip conveyors and would be happy to provide you with a package price.

Condition: used, functionality: unexamined, total length: 8,200 mm, total height: 750 mm, total width: 450 mm, conveyor belt width: 400 mm, ejection height: 700 mm, -KOM 1561- Offered is a well-maintained scraper conveyor with high discharge. All further data and dimensions can be taken from the pictures. Note: The unit is located in our warehouse and can be inspected under power. The hinged belt is in good condition. Hnjdpfx Aoyvh I Iogtjt

Condition: good (used), Year of construction: 1987, functionality: fully functional, total width: 1,500 mm, total length: 1,000 mm, overall weight: 855 kg, WAG 894- Offered here is a Novalith hard stone surface plate. Surface plate dimensions: 1500 mm x 1000 mm x 190 mm. Year of manufacture: 1987. Weight: approx. 855 kg. Flatness (specified): 20 μm. Flatness (actual): 50 μm. Hnodpfx Agey Auuhotet

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Hodshgiyiepfx Agtont Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Accessories: decoiler GM1

Year of construction: 1979, condition: not inspected (used), Hahn & Kolb Variomatic 12 station indexing table automat -WKG 443- Offered here is an automatic indexing plate machine from the company Hahn&Kolb. Hnedpfx Agehg Nkrotot Technical data: Manufacturer: Hahn&Kolb Type: Variomatic T 4-12 Year of manufacture: 1979 Table: Ø 630mm Units: 1x spindle unit, 1x slide unit, 8x quill units Chuck outer diameter: 135mm Max. Workpiece clamping width: 80mm Max. Drilling capacity in steel: 16mm

Condition: good (used), Year of construction: 1983, Offered here is a twist drill point grinding machine from the company Gühring of the type AS 417. Data: Manufacturer: Gühring Type: AS 417 year of manufacture: 1983
 small grinding wheel: Ø 6mm gr.grinding wheel: Ø 60mm weight: 0,3t max. workpiece length: 300mm accessories: 
Wet grinding device
 surface planer device Hnodsg Rw Ntspfx Agtot machine light
 pneumatic workpiece clamping

Condition: excellent (used), Offered here is a heavy, well-preserved cold circular saw from the company Trennjäger. Data: Hnsdpfog Rxh Dsx Agtjt Saw blade: 275 x 2.5 x 40 T8 = Z110 Two speeds Angle adjustment: from 90°-0 Equipment: Hydraulic vice hydraulic feed (infinitely variable) Integrated coolant system

Condition: used, functionality: unexamined, machine/vehicle number: 4059/74, General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Hedpfxegg Sbvj Agtont

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: Hodpfer A Hdgex Agtsnt - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Direct contact details and further information can be found in the attached PDF document

Year of construction: 1960, condition: not inspected (used), Forst RF 20x2000 internal broaching machine -WKG 189- Hnedpfjhu E Egjx Agtjt Data: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. Tractive force: 20t Max. Stroke: 2000mm Max. Cutting speed: 5,6m/min Max. Return speed: 30m/min Max. Workpiece diameter: Ø 300mm Max. Tool diameter: Ø 90mm Weight: 3,5t Remark: without tub

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for Hnsdpfx Agein Ub Tetjt the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Suhner Sumatic BEM 20 + Polydrill Drilling Unit Manufacturer: Suhner Model: Sumatic BEM 20 + Polydrill kW: 2.2 V: 380/220; 460/230 Hodpsd Huvqefx Agtont A: 5.7/9.8; 4.9/8.5 Hz: 50/60 RPM: 940 / 1150 Spindle mount: 13 mm, 25-125 mm, double spindle drill head

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli Hodpfxod I R Ngo Agtent type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke Hnsdpfx Aod Nb A Negtst

Condition: not inspected (used), Rotary pump (Pu 115) Hnodpfx Agjd Nd Ukstet lenght/width/height: 1,15m x 0,40m x 0,65 m weight: 165kg Motor Power: no info rpm: 1400 Capacity range: 36 Hm : 30

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 3273, Neff - internal broaching press machine type: vertical hydraulic broaching press manufacturer: Neff Germany type: 16 SRKA built in: 1977 stroke: 1300 pulling force: 16.000KG working stations: 1 PCs drive: hydraulic system equipment: coolant system Hodpfed N Rl Nsx Agtjnt remark: machine under power in stock Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: Hnodpfxjtuuvzj Agtjt The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 2001, condition: good (used), machine/vehicle number: WAG737, Size: 630 x 630 mm Threaded holes according to DIN 55201 available: 5 pieces Hnodpfeddxd Tox Agtet

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine no.: 03.2123 General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition. Pulling force: 25000 KG Broaching length: 2000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Mounting diameter for broach holders: 3 x Ø 100 mm Clearance width between cylinders: Nominal size 500 mm Measured clearance width between cylinders: max. 590 mm Cutting speed: Hydraulically continuously adjustable from 1 m/min to max. 10 m/min Return speed: Hydraulically continuously adjustable from 5 to max. 25 m/min Machine footprint: (w x d x h) approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connection value: 380 volts 50 Hz / 22 kW Accessories / special equipment: The machine is currently without a workpiece table. A workpiece sliding table was mounted on the machine, with a special workpiece clamping device for external broaching. (Workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic locking mechanism in the pull bridge and in the feed mechanism. The machine has a coolant system with an integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production, and for optimal use, a foundation (pit) is ideally required. Broach holders and pin ejectors are available upon request. The machine can be inspected at our warehouse. Hnedsdffzfopfx Agtet

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Hedpfx Aecm Elnegtent